Analytic Systems IPSI2400-20-110 Battery ChargersAC Intelligent Pure Sine Wave Inverter, 2400W, 20-40V In, 110V OutDigital Signal Processor controlled high power MosFet technology creates a low voltage Sine-Wave that is fed into a compact toroidal step-up transformer to create a very clean low EMI AC output. Using the free to download ‘Power Wizard’ software, the user can select output frequency, output voltage, output frequency and low voltage shutdown parameters from any laptop through the standard micro-usb interface. Safety features include current limiting, short circuit protection, inrush protection (during connection to the DC source), overtemperature de-rating and shutdown and low input voltage warning and shutdown. An Off-Line UPS options allows external AC to be routed through the inverter for high power UPS function if the external AC fails.Features: Programmable Low Voltage Shutdown Overload Protected Short Circuit Protected DSP Controlled Programmable Frequency Over Temperature Protected Hardwire AC Output Connection Programmable Output Voltage Three year parts and labor warranty Specifications:Amps Per Bank = NONE Battery Type = NONE Charger Input - Voltage = 110 VAC Charger Output - Amps = 20-24 Charger Output Voltage = 20-40 VDC Charger Type = NONE Charging Banks = NONE Portable = NONENormalized SKU: IPSI240020110

Analytic Systems PWI320-12 Battery ChargersAC Power Supply 20/25A, 12V Out, 85-265V InThe PWI320 Intelligent Power Supply delivers a full 300 watts of output power for communications, control or a wide variety of other devices. It is fully Digital Signal Processor controlled and feature Universal Input Voltage from 85 to 265 VAC at 50 or 60 Hz with Active Power Factor Correction for the most efficient use of AC power.The Power Supply is preset to the same voltage as a fully charged battery of the nominal output voltage (ie. 13.6V for a 12V model, etc.). The voltage can be adjusted over a reasonable range using the front panel controls, or the PowerWizard software that is free to download from www.analyticsystems.com.Seven dual color LEDs clearly indicate output current levels as well as indicating faults with the Power Supply. Safety features include Power Supply over temperature shutdown, current limiting, short circuit protection, input under voltage shutdown and output overvoltage protection all with automatic recovery.  PWI320MW model available with MIL connectors, extra input and output filtering and sealed to IP66Features: Digital Signal Processor controlled Universal worldwide AC input Computer programmable Simple front panel controls Easy connection to loads High Vibration Rugged Duty Dry Contact Output Fail Relay Carrying Handle Canbus / RS232 / Remote Control port Five year parts and labour warranty Specifications:Amps Per Bank = NONE Battery Type = NONE Charger Input - Voltage = 85-265 VAC Charger Output - Amps = 20-25 Charger Output Voltage = 12 VDC Charger Type = NONE Charging Banks = NONE Portable = NONENormalized SKU: PWI32012

Analytic Systems BCA-1505-24 Battery ChargersAC Charger 2-Bank 55A, 24V Out, 110V InThe BCA1505 battery charger provides up to 1500 watts to charge a one or two bank battery system at 12, 24, 32, 48 or 72(rail) volts from a 110 or 220 VAC source. The batteries must share a common ground.Features include user selectable 2-stage or 3-stage charging profiles, temperature compensation and user initiated equalization for optimum charging and maximum battery life.Protection include output overvoltage, battery or charger over temperature, low input voltage, overload and short circuit.Features: One or two bank charging Temperature compensation Color coded output terminals 2 or 3 stage charging profiles Can function as a power supply Visual indicators for operation and errors Military-grade extrusion ensures a high tolerance for shock and vibration Fast and accurate charging Low EMI Rugged and reliable Three year warranty (parts & labor) Specifications:Amps Per Bank = NONE Battery Type = NONE Charger Input - Voltage = 110/220 VAC Charger Output - Amps = 60 Charger Output Voltage = 24 VDC Charger Type = NONE Charging Banks = 2 Portable = NONENormalized SKU: BCA150524

Analytic Systems BCA1505-12 Battery ChargersAC Charger 2-Bank 100A, 12V Out, 110V/220VAC InThe BCA1505 battery charger provides up to 1500 watts to charge a one or two bank battery system at 12, 24, 32, 48 or 72(rail) volts from a 110 or 220 VAC source. The batteries must share a common ground.Features include user selectable 2-stage or 3-stage charging profiles, temperature compensation and user initiated equalization for optimum charging and maximum battery life.Protection include output overvoltage, battery or charger over temperature, low input voltage, overload and short circuit.Features: One or two bank charging Temperature compensation Color coded output terminals 2 or 3 stage charging profiles Can function as a power supply Visual indicators for operation and errors Military-grade extrusion ensures a high tolerance for shock and vibration Fast and accurate charging Low EMI Rugged and reliable Three year warranty (parts & labor) Specifications:Amps Per Bank = NONE Battery Type = NONE Charger Input - Voltage = 110/220 VAC Charger Output - Amps = 100 Charger Output Voltage = 12 VDC Charger Type = NONE Charging Banks = NONE Portable = NONENormalized SKU: BCA150512

Analytic Systems BCA610V-110-12 Battery ChargersAC Charger 2-Bank 40A, 12V Out, 110VAC In with Digital Volt/Amp MeterThe traditional BCA610 series chargers feature 600 watts of precision charging power for 1 or 2 banks of batteries at 12, 24, 32, 36, 48 or 72(rail) volts DC. Models are available to operate from 110 or 220 volts AC at 50, 60 or 400 Hz.All models feature user selectable 2-stage or 3-stage charging profiles, temperature compensation and user initiated equalization for optimum charging and maximum battery life.Features: Two or three stage charging profiles Adjustable float voltage One or two bank charging (three bank optional) Temperature compensation Low EMI Manual equalization mode Three year warranty (parts & labor) Specifications:Amps Per Bank = NONE Battery Type = NONE Charger Input - Voltage = 110 VAC Charger Output - Amps = 40 Charger Output Voltage = 12 VDC Charger Type = NONE Charging Banks = 2 Portable = NONENormalized SKU: BCA610V11012

Analytic Systems BCA1000V-110-12 Battery ChargersAC Charger 2-Bank 60A, 12V Out, 110V In, with Digital Volt/Amp MeterThe traditional BCA1000 series chargers feature 1000 watts of precision charging power for 1 or 2 banks of batteries at 12, 24, 32, 36, 48 or 72(rail) volts DC. Models are available to operate from 110 or 220 volts AC at 50, 60 or 400 Hz.All models feature user selectable 2-stage or 3-stage charging profiles, temperature compensation and user initiated equalization for optimum charging and maximum battery life.Features: Two or three stage charging profiles Adjustable float voltage One or two bank charging (three bank optional) Temperature compensation Low EMI Manual equalization mode Three year warranty (parts & labor) Specifications:Amps Per Bank = NONE Battery Type = NONE Charger Input - Voltage = 110 VAC Charger Output - Amps = 60 Charger Output Voltage = 12 VDC Charger Type = NONE Charging Banks = 2 Portable = NONENormalized SKU: BCA1000V11012

Analytic Systems BCA1000V-110-24 Battery ChargersAC Charger 2-Bank 40A, 24V Out, 110VAC In, with Digital Volt/Amp MeterThe traditional BCA1000 series chargers feature 1000 watts of precision charging power for 1 or 2 banks of batteries at 12, 24, 32, 36, 48 or 72(rail) volts DC. Models are available to operate from 110 or 220 volts AC at 50, 60 or 400 Hz.All models feature user selectable 2-stage or 3-stage charging profiles, temperature compensation and user initiated equalization for optimum charging and maximum battery life.Features: Two or three stage charging profiles Adjustable float voltage One or two bank charging (three bank optional) Temperature compensation Low EMI Manual equalization mode Three year warranty (parts & labor) Specifications:Charging Banks = 2 Charger Type = NONE Charger Output Voltage = 24 VDC Charger Output - Amps = 40 Charger Input - Voltage = 110 VAC Battery Type = NONE Amps Per Bank = NONE Portable = NONENormalized SKU: BCA1000V11024

  Download LiteratureProMariner 43015 Battery ChargersProSport 15 Gen 3 Heavy Duty Recreational Series On-Board Marine Battery ChargerProSport Generation 3 On-Board Marine Battery Chargers incorporate all-digital microprocessor control. Like no other, the new ProSport Series provides automatic installation feedback with its exclusive "System Check OK" and individual "Battery Bank Trouble" LED indicators, and also has the most advanced energy saving mode. After fully charging and conditioning batteries, ProSport's Energy Saver Mode will monitor and Auto Maintain batteries only when needed to maintain a full state of charge, resulting in maximum reserve power performance and lower AC power consumption and operating costs. ProSport incorporates Distributed-On-Demand Charging technology, taking 100 percent of the available charging amps and distributing them to any one or combination of all batteries as needed for faster charging. ProSport is 100 percent waterproof and shockproof, weighing 40 percent lighter than older technology epoxy filled chargers providing cooler operation and greater reliability.Features: ProMar Digital Technology: Microprocessor and software controlled pulse charging technology delivering a 40 percent lighter design than the previous generation of epoxy filled chargers, cooler charger operation and faster charging System OK and Battery Bank Trouble Status Indicators: Advanced technology eliminates time consuming troubleshooting by clearly indicating system and battery connections are OK or if a fault is present on a specific battery bank Digital Multi-Stage Performance Charging: Fully charge and extend the life of your batteries - automatically charges, conditions and safely maintains all batteries on board for maximum time on the water Energy Saver Mode: After fully charging and conditioning batteries, ProSport's Energy Saver Mode will monitor and Auto Maintain batteries only when needed, maintaining a full state of charge. This significantly reduces AC power consumption, lowers operating costs and maximizes reserve power performance. Storage Recondition Mode: During short or long-term storage, ProSport automatically reconditions all batteries on board once a month for maximum battery life and performance Distributed-On-Demand Technology: Automatically charges and maintains your engine crank battery while distributing all remaining charging amps to trolling motor or house battery(s) Digital LED Display and Battery Type Selector: LED indicators for Charging, Conditioning and Auto Maintain modes in addition to AC power and selected battery type (2 charge profiles to choose from with a 3rd high performance AGM HP profile on the ProSport20 Dual only) Two digitally selectable charge profiles including a once-a-month storage reconditioning mode for extending battery life Built-in Quality and Safety: Compact and rugged extruded aluminum design, dual in-line DC safety fuses for trolling motor and house battery banks. Built-in over-voltage, overload, over-temperature, reverse polarity and ignition protection Pre-wired for Easy Installation Specifications:Amps Per Bank = NONE Battery Type = NONE Voltage - Charger Input = NONE Amps - Output = NONE Charger Type = NONE Banks = NONE Portable = NONENormalized SKU: 43015UPC Code: 031669430150ProMariner 43015 Literature Download  Owners Manual  Product Brochure

Blue Sea System 7608 Battery Chargers7608 BatteryLink® Charger (North America) - 12V - 20Amp - 2 BankCharge at or away from the Dock Compact 12V 20A – 2 Bank AC Charger 170A Continuous ACR Remote Emergency Jump Start Battery Temperature Compensation Remote Display Included IP67 Waterproof Specifications: Total Output Current: 20A Nominal Voltage: 12V DC Number of Outputs: 1 Negative/2 Positive Terminal Stud Torque: 60 in-lb (6.78 Nm) Continuous Rating: 65A Intermittent Rating: 115A Universal AC Input Voltage: 90-265V AC AC Input Frequency: 50/60Hz Typical Float Voltage: 13.5V DC Battery Types: AGM/Flooded/TPPL Cable Size to Meet Ratings: 10 AWG Negative Cable/6 AWG Positive cable Maximum Battery CCA: 850CCA Maximum Cable Size: 1/0 AWG (50mm) Operating Current: 10mA/60mA Plug Style: North American: NEMA 5-15P Recommended Battery Bank Sizes: 60Ah Minimum Terminal Stud Size: 1/4"-20 Warranty: 5 Year Combine 30 sec: 13.5V Combine 2 Min: 13.0V Open 10 sec: 12.35V Open 30 sec: 12.75V WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:Amps - Output = 20Amp Amps Per Bank = NONE Banks = 2 Bank Battery Type = Flooded/AGM Charger Type = NONE Portable = NONE Voltage - Charger Input = NONE Voltage - Output (Volts) = 12VNormalized SKU: 7608UPC Code: 632085076085

Mastervolt 44320600 Battery ChargersChargeMaster Plus Battery Charger - 24V-60A-3-BankChargeMaster Plus is the next generation battery chargers that integrates multiple functions into one singledevice. Replacing auxiliary chargers, battery isolators and VSR, ChargeMaster Plus reduces system complexity and cost. Designed for versatility, it charges virtually any combination of three batteries at high speed and works anywhere in the world.Features: Multicharger with two outputs, one in/output, DC-DC converter, current limiter and VSR Combine Lithium Ion, Gel or AGM, and large or small 12/24V battery banks on a single charger Charges multiple batteries while being underway Extended specificitions: offers 20% more output at 14.4V and 80% charging power at 60°C Safe Charge: quickly recognize the State of Charge for extended battery life Very wide operating range of 80-275V AC, 35-70 Hz Compact, easy to connect and quick to install With the Battery’s Best Friend architecture, ChargeMaster Plus is capable of charging a multitude of battery chemistries, sizes and voltages. All batteries are charged with the fast and safe 3-step+ charge method.Other unique features are: Revival mode: automatically revives even fully depleted batteries Multi voltage: charge 12V starter battery in a 24V system, without additional components Priority Charge: redirect available power to the lowest battery, for faster charging Smart Input: charge all three batteries from one single alternator for continuous charging on the go Global ChargingThe ChargeMaster Plus handles worldwide AC voltages and frequencies. Resisting large voltage fluctuations and high temperatures, it keeps working in harsh environments. For marine and mobile markets, ChargeMaster Plus is CE, E-mark, ABYC, UL, SAE, CEC and RCM/C-Tick compliant.System SimplicityNowadays, equipment must be self-explaining. The ChargeMaster Plus displays the charge phase of allthree outputs in an understandable way. Robust and ergonomic connections save installation time. Anintegrated VSR eliminates the nod for additional components and ensures that the alternators energy is funnelled through to the batteries.Powerful connectionsIn modern applications, all components work together. CAN-based MasterBus enables the charger to communicate with displays, shunts and power systems including communication standards like CZone®, NMEA and CANopen. The ChargeMaster Plus can operate as a power supply for delicate communication equipment, or during the construction phase of a boat.Specifications: Nominal output voltage (output 1 & 2): 24V Nominal output voltage (output 3): 24V/12V Total charge current: 60A at 28.8V Output current output 3 (current limited): 5-40A at 24V / 10A at 12V Number of battery outlets: 2 + 1 Recommended battery capacity: 200-500 Ah Nominal input voltage: 120/230V (80-275V) 50/60 Hz Max. AC current (230V / 120V): 10,2A / 20.4A AC connection: screw terminals,suitable up to 6 mm2 Power supply mode: yes Display/read-out: LED Dimensions, hxwxd: 15.1" x 9.8" x 5" (384 x 250 x 127 x mm) Weight: 5.9 kg / 13lb Approvals: CE, E-mark, ABYC, UL1236, SAE J1171, CEC, RCM/C-Tick Technical Specifications Charge characteristic:  IUoUo, automatic / 3-step+ for Gel/AGM/Lithium Ion (LiFePO4)/traction/spiral Temperature compensation: -30 mV/°C / -17 mV/°F temperature sensor included Voltage compensation: automatic DC consumption: < 2 mA (MasterBus off) Current Control function: yes, through MasterBus Power factor control: yes, > 0.98 Temperature range (ambient temp.): -25°C to 80°C,derating > 40°C Cooling: vario fan Protection degree: IP23, vertical mounting Protections: over-temperature, overload, short circuit, high/low battery voltage MasterBus compatible: yes Charger Status Interface (alarm contact): yes, using a Multipurpose Contact Output (part # 77030500) WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:Amps - Output = 60A Amps Per Bank = 20A Banks = 3 Battery Type = NONE Charger Type = NONE Portable = NONE Voltage - Charger Input = NONE Voltage - Output (Volts) = 24VNormalized SKU: 44320600UPC Code: 816882020032

Mastervolt 44310750 Battery ChargersChargeMaster Plus Battery Charger - 12V-75A-3-BankChargeMaster Plus is the next generation battery chargers that integrates multiple functions into one singledevice. Replacing auxiliary chargers, battery isolators and VSR, ChargeMaster Plus reduces system complexity and cost. Designed for versatility, it charges virtually any combination of three batteries at high speed and works anywhere in the world.Features: Multicharger with two outputs, one in/output, DC-DC converter, current limiter and VSR Combine Lithium Ion, Gel or AGM, and large or small 12/24V battery banks on a single charger Charges multiple batteries while being underway Extended specificitions: offers 20% more output at 14.4V and 80% charging power at 60°C Safe Charge: quickly recognize the State of Charge for extended battery life Very wide operating range of 80-275V AC, 35-70 Hz Compact, easy to connect and quick to install With the Battery’s Best Friend architecture, ChargeMaster Plus is capable of charging a multitude of battery chemistries, sizes and voltages. All batteries are charged with the fast and safe 3-step+ charge method.Other unique features are: Revival mode: automatically revives even fully depleted batteries Multi voltage: charge 12V starter battery in a 24V system, without additional components Priority Charge: redirect available power to the lowest battery, for faster charging Smart Input: charge all three batteries from one single alternator for continuous charging on the go Global ChargingThe ChargeMaster Plus handles worldwide AC voltages and frequencies. Resisting large voltage fluctuations and high temperatures, it keeps working in harsh environments. For marine and mobile markets, ChargeMaster Plus is CE, E-mark, ABYC, UL, SAE, CEC and RCM/C-Tick compliant.System SimplicityNowadays, equipment must be self-explaining. The ChargeMaster Plus displays the charge phase of allthree outputs in an understandable way. Robust and ergonomic connections save installation time. Anintegrated VSR eliminates the nod for additional components and ensures that the alternators energy is funnelled through to the batteries.Powerful connectionsIn modern applications, all components work together. CAN-based MasterBus enables the charger to communicate with displays, shunts and power systems including communication standards like CZone®, NMEA and CANopen. The ChargeMaster Plus can operate as a power supply for delicate communication equipment, or during the construction phase of a boat.Specifications: Nominal output voltage (output 1 & 2): 12V Nominal output voltage (output 3): 12V Total charge current: 75A at 14.4V Output current output 3 (current limited): 5-40A at 12V Number of battery outlets: 2 + 1 Recommended battery capacity: 320-800 Ah Nominal input voltage: 120/230V (80-275V) 50/60 Hz Max. AC current (230V / 120V): 6,5A / 13A AC connection: screw terminals,suitable up to 6 mm2 Power supply mode: yes Display/read-out: LED Dimensions, hxwxd: 15.1" x 9.8" x 5" (384 x 250 x 127 x mm) Weight: 5.9 kg / 13lb Approvals: CE, E-mark, ABYC, UL1236, SAE J1171, CEC, RCM/C-Tick Technical Specifications Charge characteristic:  IUoUo, automatic / 3-step+ for Gel/AGM/Lithium Ion (LiFePO4)/traction/spiral Temperature compensation: -30 mV/°C / -17 mV/°F temperature sensor included Voltage compensation: automatic DC consumption: < 2 mA (MasterBus off) Current Control function: yes, through MasterBus Power factor control: yes, > 0.98 Temperature range (ambient temp.): -25°C to 80°C,derating > 40°C Cooling: vario fan Protection degree: IP23, vertical mounting Protections: over-temperature, overload, short circuit, high/low battery voltage MasterBus compatible: yes Charger Status Interface (alarm contact): yes, using a Multipurpose Contact Output (part # 77030500) WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:Amps - Output = 75A Amps Per Bank = 25A Banks = 3 Battery Type = Lithium Ion/Gel/AGM Charger Type = NONE Portable = No Voltage - Charger Input = 120/240v Voltage - Output (Volts) = 12VNormalized SKU: 44310750UPC Code: 816882020018

  Download LiteratureMastervolt 44311000 Battery ChargersChargeMaster Plus Battery Charger - 12V-100A-3-BankChargeMaster Plus is the next generation battery chargers that integrates multiple functions into one singledevice. Replacing auxiliary chargers, battery isolators and VSR, ChargeMaster Plus reduces system complexity and cost. Designed for versatility, it charges virtually any combination of three batteries at high speed and works anywhere in the world.Features: Multicharger with two outputs, one in/output, DC-DC converter, current limiter and VSR Combine Lithium Ion, Gel or AGM, and large or small 12/24V battery banks on a single charger Charges multiple batteries while being underway Extended specificitions: offers 20% more output at 14.4V and 80% charging power at 60°C Safe Charge: quickly recognize the State of Charge for extended battery life Very wide operating range of 80-275V AC, 35-70 Hz Compact, easy to connect and quick to install With the Battery’s Best Friend architecture, ChargeMaster Plus is capable of charging a multitude of battery chemistries, sizes and voltages. All batteries are charged with the fast and safe 3-step+ charge method.Other unique features are: Revival mode: automatically revives even fully depleted batteries Multi voltage: charge 12V starter battery in a 24V system, without additional components Priority Charge: redirect available power to the lowest battery, for faster charging Smart Input: charge all three batteries from one single alternator for continuous charging on the go Global ChargingThe ChargeMaster Plus handles worldwide AC voltages and frequencies. Resisting large voltage fluctuations and high temperatures, it keeps working in harsh environments. For marine and mobile markets, ChargeMaster Plus is CE, E-mark, ABYC, UL, SAE, CEC and RCM/C-Tick compliant.System SimplicityNowadays, equipment must be self-explaining. The ChargeMaster Plus displays the charge phase of allthree outputs in an understandable way. Robust and ergonomic connections save installation time. Anintegrated VSR eliminates the nod for additional components and ensures that the alternators energy is funnelled through to the batteries.Powerful connectionsIn modern applications, all components work together. CAN-based MasterBus enables the charger to communicate with displays, shunts and power systems including communication standards like CZone®, NMEA and CANopen. The ChargeMaster Plus can operate as a power supply for delicate communication equipment, or during the construction phase of a boat.Specifications: Nominal output voltage (output 1 & 2): 12V Nominal output voltage (output 3): 12V Total charge current: 100A at 14.4V Output current output 3 (current limited): 5-40A at 12V Number of battery outlets: 2 + 1 Recommended battery capacity: 400-1000 Ah Nominal input voltage: 120/230V (80-275V) 50/60 Hz Max. AC current (230V / 120V): 8,5A / 17A AC connection: screw terminals,suitable up to 6 mm2 Power supply mode: yes Display/read-out: LED Dimensions, hxwxd: 15.1" x 9.8" x 5" (384 x 250 x 127 x mm) Weight: 5.9 kg / 13lb Approvals: CE, E-mark, ABYC, UL1236, SAE J1171, CEC, RCM/C-Tick Technical Specifications Charge characteristic:  IUoUo, automatic / 3-step+ for Gel/AGM/Lithium Ion (LiFePO4)/traction/spiral Temperature compensation: -30 mV/°C / -17 mV/°F temperature sensor included Voltage compensation: automatic DC consumption: < 2 mA (MasterBus off) Current Control function: yes, through MasterBus Power factor control: yes, > 0.98 Temperature range (ambient temp.): -25°C to 80°C,derating > 40°C Cooling: vario fan Protection degree: IP23, vertical mounting Protections: over-temperature, overload, short circuit, high/low battery voltage MasterBus compatible: yes Charger Status Interface (alarm contact): yes, using a Multipurpose Contact Output (part # 77030500) WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:Amps - Output = 100A Amps Per Bank = 33.3A Banks = 3 Battery Type = NONE Charger Type = NONE Portable = NONE Voltage - Charger Input = NONE Voltage - Output (Volts) = 12VNormalized SKU: 44311000UPC Code: 816882020001Mastervolt 44311000 Literature Download  Owners Manual

Mastervolt 44320400 Battery ChargersChargeMaster Plus Battery Charger - 24V-40A-3-BankChargeMaster Plus is the next generation battery chargers that integrates multiple functions into one singledevice. Replacing auxiliary chargers, battery isolators and VSR, ChargeMaster Plus reduces system complexity and cost. Designed for versatility, it charges virtually any combination of three batteries at high speed and works anywhere in the world.Features: Multicharger with two outputs, one in/output, DC-DC converter, current limiter and VSR Combine Lithium Ion, Gel or AGM, and large or small 12/24V battery banks on a single charger Charges multiple batteries while being underway Extended specificitions: offers 20% more output at 14.4V and 80% charging power at 60°C Safe Charge: quickly recognize the State of Charge for extended battery life Very wide operating range of 80-275V AC, 35-70 Hz Compact, easy to connect and quick to install With the Battery’s Best Friend architecture, ChargeMaster Plus is capable of charging a multitude of battery chemistries, sizes and voltages. All batteries are charged with the fast and safe 3-step+ charge method.Other unique features are: Revival mode: automatically revives even fully depleted batteries Multi voltage: charge 12V starter battery in a 24V system, without additional components Priority Charge: redirect available power to the lowest battery, for faster charging Smart Input: charge all three batteries from one single alternator for continuous charging on the go Global ChargingThe ChargeMaster Plus handles worldwide AC voltages and frequencies. Resisting large voltage fluctuations and high temperatures, it keeps working in harsh environments. For marine and mobile markets, ChargeMaster Plus is CE, E-mark, ABYC, UL, SAE, CEC and RCM/C-Tick compliant.System SimplicityNowadays, equipment must be self-explaining. The ChargeMaster Plus displays the charge phase of allthree outputs in an understandable way. Robust and ergonomic connections save installation time. Anintegrated VSR eliminates the nod for additional components and ensures that the alternators energy is funnelled through to the batteries.Powerful connectionsIn modern applications, all components work together. CAN-based MasterBus enables the charger to communicate with displays, shunts and power systems including communication standards like CZone®, NMEA and CANopen. The ChargeMaster Plus can operate as a power supply for delicate communication equipment, or during the construction phase of a boat.Specifications: Nominal output voltage (output 1 & 2): 24V Nominal output voltage (output 3): 24V/12V Total charge current: 40A at 28.8V Output current output 3 (current limited): 5-40A at 24V / 10A at 12V Number of battery outlets: 2 + 1 Recommended battery capacity: 160-400 Ah Nominal input voltage: 120/230V (80-275V) 50/60 Hz Max. AC current (230V / 120V): 6,8A / 13.5A AC connection: screw terminals,suitable up to 6 mm2 Power supply mode: yes Display/read-out: LED Dimensions, hxwxd: 15.1" x 9.8" x 5" (384 x 250 x 127 x mm) Weight: 5.9 kg / 13lb Approvals: CE, E-mark, ABYC, UL1236, SAE J1171, CEC, RCM/C-Tick Technical Specifications Charge characteristic:  IUoUo, automatic / 3-step+ for Gel/AGM/Lithium Ion (LiFePO4)/traction/spiral Temperature compensation: -30 mV/°C / -17 mV/°F temperature sensor included Voltage compensation: automatic DC consumption: < 2 mA (MasterBus off) Current Control function: yes, through MasterBus Power factor control: yes, > 0.98 Temperature range (ambient temp.): -25°C to 80°C,derating > 40°C Cooling: vario fan Protection degree: IP23, vertical mounting Protections: over-temperature, overload, short circuit, high/low battery voltage MasterBus compatible: yes Charger Status Interface (alarm contact): yes, using a Multipurpose Contact Output (part # 77030500) WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:Amps - Output = 40A Amps Per Bank = NONE Banks = 3 Battery Type = NONE Charger Type = NONE Portable = NONE Voltage - Charger Input = NONE Voltage - Output (Volts) = 24VNormalized SKU: 44320400UPC Code: 816882020025

  Download LiteratureMinn Kota 1831050 Battery ChargersMK-105PD Portable Digital Charger - 1 Bank & 5 AmpPower TripsYou can take it with you. Our easy-to-use digital portable chargers feature Automatic Multi-Stage Charging to keep you on the water longer and are designed to extend the overall life of your batteries.Digitally Controlled - Digital ± ControlMicroprocessor design protects your batteries so you can stay on the water longer. It monitors temperature and state of charge to create a faster, regulated, more precise charge. Also includes automatic shut-off when charging is complete to extend battery life.Automatic Temperature CompensationCharging your batteries at higher or lower temperatures can damage your battery over time. So our chargers are designed to sense outside temperature fluctuations and adjust accordingly,delivering a fast, accurate charge.Multi-Stage ChargingMinn Kota’s Multi-Stage Charging delivers a fast, precise charge profile by automatically controlling current and voltage without overcharging your batteries.Specifications: 1 Charging Bank 5 Amps Total Output Short circuit and reverse polarity For use with 12 volt system with 12V/6 cell lead-acid batteries including Flooded/Wet Cell, Maintenance Free and AGM/Starved Electrolyte 20-125 Amp hour rating FCC Compliant UL Listed WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:Voltage - Output (Volts) = NONE Voltage - Charger Input = NONE Portable = Yes Charger Type = NONE Battery Type = NONE Banks = 1 Amps Per Bank = NONE Amps - Output = 5Normalized SKU: 1831050UPC Code: 029402044795Minn Kota 1831050 Literature Download  Quick Reference Guide

  Download LiteratureDual Pro GC122 Battery ChargersGo Charge Battery Maintainer & Charger - 2AGo Charge battery chargers are an affordable, reliable and safe battery charging system designed for everyday use. The system is engineered for users who need a charging system on an occasional basis and may not want or need the capabilities of a heavier duty and higher amperage product. The system delivers superior value to customers.Features: State of charge LED indicator Reverse polarity protected Zero spark technology Includes power cord and fused harness 1 year warranty Conforms to UL/CUL specifications Four (4) stage charge profile Both alligator clips and ring terminals included CE approved Over voltage and over current protection Universal input Quick disconnect harness connection Flexible rotating A/C power plug Battery Maintainer and Charger Affordable, Reliable and Safe TROUBLE FREE—Just Plug It In and Forget It! Join Over 750,000 of Our Satisfied Customers! Wide Variety of Applications May be used in many types of everyday applications including:  Automobiles ATVs Golf Carts Lawn Mowers Motorcycles Watercraft Snowmobiles... Specifications:Amps - Output = 2 Amps Per Bank = NONE Banks = NONE Battery Type = NONE Charger Type = NONE Portable = NONE Voltage - Charger Input = NONE Voltage - Output (Volts) = NONENormalized SKU: GC122UPC Code: 738562000496Dual Pro GC122 Literature Download  Product Brochure