JL Audio 010-03166-00 AccessoriesJL Audio TWK 88 Signal Processor #010-03166-00Normalized SKU: 0100316600UPC Code: 699440981019

JL Audio 010-03102-00 AccessoriesJL Audio FIX 82 Signal Processor #010-03102-00Normalized SKU: 0100310200UPC Code: 699440981002

JL Audio 010-03028-00 AccessoriesJL Audio MAX-KIT Signal Processor #010-03028-00Normalized SKU: 0100302800UPC Code: 699440906029

Fusion 010-01628-04 AccessoriesNRX300 NMEA 2000 Wired RemoteTake Control of Your Audio EnvironmentA perfect solution for audio control, the Fusion NRX300 wired remote allows you to enjoy localized audio control from any audio zone1 on board your boat. An optically bonded monochrome LCD allows for easy navigation. Quick and simple to install with a plug-and-play setup. Install with a conventional flush mount or integrate into the helm with a premium flat finish. Designed and Engineered to True-Marine™ StandardsBuilt on the True-Marine design philosophy from Fusion, the MS-NRX300 remote is IPX7-rated and has been tested to a high level of protection against salt fog, temperature, vibration, and UV.NMEA 2000 RepeaterConnect the MS-NRX300 remote to your boat’s existing NMEA 2000 network and display data from your compatible marine electronics, including wind data, depth, speed, heading, position, ETA, and water temperature.Multi-Zone™ TechnologyThe MS-NRX300 remote can control up to four audio zones1 on board your boat with localized volume control and global source selection – allowing you to customize your onboard audio entertainment experience.What's In the Box? Fusion NRX300 black wired remote Mounting gasket Four 8-gauge, self-tapping screws Two screw covers 20 ft (6 meter) drop cable for the NMEA 2000 network T-connector for the NMEA 2000 network Dust cover Documentation 1Number of zones dependent on your onboard Fusion entertainment systemEngineering enhancements are ongoing and may not be reflected in the pictures, videos, and specifications. Normalized SKU: 0100162804UPC Code: 753759364298

JL Audio 010-13877-00 AccessoriesVeX™ Enclosed Speaker System Swivel Mount for Pipe Mounting - PS-SWMCP-B-3.000Low-profile, machined mounting fixtures provide rock-solid attachment points for the VeX™ Enclosed Systems to a variety of roll cage diameters. They feature the JL Audio name logo machined on the side. Each mounting fixture set is designed to mount two VeX™ Pods.*Sold in pairs Normalized SKU: 0101387700UPC Code: 699440937092

JL Audio 010-13876-00 AccessoriesVeX™ Enclosed Speaker System Swivel Mount for Pipe Mounting - PS-SWMCP-B-2.875Low-profile, machined mounting fixtures provide rock-solid attachment points for the VeX™ Enclosed Systems to a variety of roll cage diameters. They feature the JL Audio name logo machined on the side. Each mounting fixture set is designed to mount two VeX™ Pods.*Sold in pairs Normalized SKU: 0101387600UPC Code: 699440937092

JL Audio 010-13875-00 AccessoriesVeX™ Enclosed Speaker System Swivel Mount for Pipe Mounting - PS-SWMCP-B-2.750Low-profile, machined mounting fixtures provide rock-solid attachment points for the VeX™ Enclosed Systems to a variety of roll cage diameters. They feature the JL Audio name logo machined on the side. Each mounting fixture set is designed to mount two VeX™ Pods.*Sold in pairs Normalized SKU: 0101387500UPC Code: 699440937085

JL Audio 010-13874-00 AccessoriesVeX™ Enclosed Speaker System Swivel Mount for Pipe Mounting - PS-SWMCP-B-2.625Low-profile, machined mounting fixtures provide rock-solid attachment points for the VeX™ Enclosed Systems to a variety of roll cage diameters. They feature the JL Audio name logo machined on the side. Each mounting fixture set is designed to mount two VeX™ Pods.*Sold in pairs Normalized SKU: 0101387400UPC Code: 699440937078

JL Audio 010-13859-00 Accessories25' Powered Network Cable for Connection of Compatible NMEA 2000® MediaMaster® - MMC-PN2K-25This powered network cable is designed to simulate an isolated, stand-alone NMEA 2000® network for the connection of a compatible MediaMaster® source unit (sold separately) with one MediaMaster® MMR-40 NMEA 2000® Network Controller (sold separately) or compatible MFD (Multi-Function Display).Note: JL Audio® Powered Network Cables support a maximum of two NMEA 2000® devices. For systems with additional NMEA 2000® devices, a genuine NMEA 2000® network must be assembled, which does not support JL Audio® Powered Network Cables. Connection of MM100s (not MM100s-BE) requires MMC-DN2K-1 or MMC-DN2K-6 to adapt the Deutsch connector on the MM100s to a NMEA 2000® 5-pin Micro-C connector. Normalized SKU: 0101385900UPC Code: 699440999281

JL Audio 010-13858-00 Accessories6' Powered Network Cable for Connection of Compatible NMEA 2000® MediaMaster® - MMC-PN2K-6This powered network cable is designed to simulate an isolated, stand-alone NMEA 2000® network for the connection of a compatible MediaMaster® source unit (sold separately) with one MediaMaster® MMR-40 NMEA 2000® Network Controller (sold separately) or compatible MFD (Multi-Function Display).Note: JL Audio® Powered Network Cables support a maximum of two NMEA 2000® devices. For systems with additional NMEA 2000® devices, a genuine NMEA 2000® network must be assembled, which does not support JL Audio® Powered Network Cables. Connection of MM100s (not MM100s-BE) requires MMC-DN2K-1 or MMC-DN2K-6 to adapt the Deutsch connector on the MM100s to a NMEA 2000® 5-pin Micro-C connector. Normalized SKU: 0101385800UPC Code: 699440999274

JL Audio 010-03342-00 AccessoriesJLid™ Comm & Network Bridge Hub for MVi Amplifiers - MVi-HUBThe MVi marine amplifier ecosystem is designed to be very flexible, offering users almost limitless combinations of amplifiers and channel architectures, along with the amazing power of integrated DSP technology.The MVi-HUB greatly simplifies the configuration of a multi-amp system by allowing all amplifiers of an amplifier network to appear in a single TüN® software session. Networking synchronizes the DSP presets of all amplifiers and distributes commands from a single, optional Digital Remote Controller (M-DRC-50 or DRC-205, sold separately) across the entire amplifier network. DRC commands can include Master Volume, Subwoofer Level, Fader, Zone Level, and Preset Selection (functionality varies by model).The MVi-HUB includes JLid-COMM ports to connect up to six amplifiers (one “Master” MVi amplifier and up to five “Slave” MV or MVi amplifiers) using standard CAT5e cables, allowing users to quickly switch between amplifiers during the tuning process, without disconnecting and connecting multiple cables.A dedicated JLid-CTRL accessory port is also included to connect an optional DRC or VXi-BTC Bluetooth® Communicator (each sold separately). The VXi-BTC accessory enables convenient wireless setup and tuning of the entire amplifier network using a compatible iOS® or Android® device with the TüN® Mobile App.For ease of connection, the MVi-HUB is powered via connected amplifiers and requires no separate power or turn-on wiring (Note: MVi-HUB operation requires at least one “Master” MVi amplifier connection.)MVi-HUB includes the following features: JLid-COMM Connections: 1 Master Input / 5 Slave Outputs JLid-CTRL Connections: 1 Accessory Port Amp Identifier Status LEDs Powered via JLid™ connection to MVi amplifiers Normalized SKU: 0100334200UPC Code: 699440986526

JL Audio 010-03134-00 AccessoriesMMR-5N2K MediaMaster® NMEA 2000® Volume ControllerThe MMR-5N2K is a wired remote designed to add auxiliary volume control to compatible MediaMaster® source units.Outfitted with an NMEA 2000® Micro-C connector, the MMR-5N2K connects to a host MediaMaster® source unit in two ways:Direct interface with a vessel's NMEA 2000® network using applicable NMEA 2000® cables and connectors (not included)Direct connection to a single MediaMaster® source unit using MMC-PN2K powered network cables (sold separately) to simulate an isolated, stand-alone NMEA 2000® networkEngineered for real-world marine (and many outdoor) applications, its weatherproof (IPX7-rated) design is built to withstand the harshest environments.The MMR-5N2K includes the following features:  NMEA 2000® Certified (LEN 2) Weatherproof design (IPX7 rated) for real marine duty Large rotary design for easy adjustments, especially while in motion One knob simultaneously adjusts all audio zones  Simple, push-button audio mute/unmute control Integrated status LED ring with programmable brightness Front-mounted design requires just a single 1.5-inch (38 mm) hole for installation Automatically recognizes which MediaMaster® source unit model is connected The MMR-5N2K is compatible with these MediaMaster® source units: MM105 MM100s-BE MM100s MM80-HR MM50 Note: The MMR-5N2K should only be used with a single MediaMaster® source unit, connected via a NMEA 2000® network or MMC-PN2K powered network cables (sold separately). The level control mode for each audio zone of the host source unit must be set to Relative or Variable. When connected, all audio zones will adjust simultaneously. Functionality of the MMR-5N2K is solely derived from the host MediaMaster® source unit.  Normalized SKU: 0100313400UPC Code: 699440999489

JL Audio 010-03131-00 AccessoriesJL Audio MMR-20-BE Round Wired Remote for MediaMaster99921Model: Power On/Off Source Select Volume Up/Down Track Up/Down (USB & BT) Track Fast-Forward/Fast-Rewind (USB) Favorite Up/Down (Radio) Play/Pause (USB & BT) Mute/Unmute (Radio & Aux) Round, wired, non-display remote controller for use with MediaMaster®The MMR-20-BE is a wired remote controller engineered to add auxiliary control functionality to MediaMaster® source units.Built for marine and off-road applications, its weatherproof (IP67 rated) design places frequently used functions of your MediaMaster® source unit in a simple, intuitive design that’s easy-to-use. Its large, backlit controls and LED source indicators are easily identifiable, day or night, with brightness settings that can be adjusted using your MediaMaster® source unit.A small footprint and simple, one-hole design means the MMR-20-BE can be installed in even the tightest of spaces. Depending on your system layout, you may add up to three MMR-20-BE remote controllers to a single MediaMaster® source unit. Each MMR-20 can be connected up to 75 ft. (22.8 m) away from its source unit.USA Limited Warranty: Two (2) years from the original date of purchase.Note: Requires MMC Connection Cables (sold separately). Connection cables are available in several lengths to fit your specific application. Y-splitters are also available to connect up to three remotes to a MediaMaster® source unit.Specifications Physical Specifications Maximum Mounting Panel Thickness 1.5 in / 38 mm Mounting Hole Diameter 2 in / 50 mm Rear Depth* 1.16 in / 29 mm Width 2.36 in / 60 mm Height 2.36 in / 60 mm Depth 0.59 in / 15 mm *Total mounting depth is greater (and varies by installation) with mounting bracket. Normalized SKU: 0100313100UPC Code: 699440999212

JL Audio 010-13835-00 AccessoriesJL Ausio M880ETX-CVR Neoprene Cover Fits 8.8n ETX Systems95853Model: ETX-CVRNeoprene covers to protect ETX enclosed speaker systems during storage and traileringHaving undergone over 1000 hours of salt/fog and UV testing, these durable protective cases are designed to provide stylish but serious protection for ETX Enclosed Speaker Systems (v2 or v3).Constructed from 3mm Neoprene, each cover is laminated with dark gray spandex and classically finished with a woven "JL Audio / How we play" trim label. Designed to protect the finish of your investments, this marine-ready material features tiny laser-cut holes at the bottom that are just big enough to let water drain out, and purposely small enough to never let insects in. A single, high-quality #5 zipper with locking slider on the front facilitates quick and easy covering or removal. This case is the perfect solution to problematic dust, grime and other environmental invaders that can be harmful to your speaker while your boat is docked or traileredOwners of ETXv2/v3 Enclosed Speaker Systems, these are for you.Designed to work with any mounting clamp/application.Sold in pairs.Care Instructions: Rinse with clean, fresh water and air dry. Do not expose to harsh chemicals or cleaning agents.Normalized SKU: 0101383500UPC Code: 699440958530

JL Audio 010-13834-00 AccessoriesJL Audio M770ETX-CVR Neoprene Cover Fits 7.7in ETX Systems95850Model: ETX-CVRNeoprene covers to protect ETX enclosed speaker systems during storage and traileringHaving undergone over 1000 hours of salt/fog and UV testing, these durable protective cases are designed to provide stylish but serious protection for ETX Enclosed Speaker Systems (v2 or v3).Constructed from 3mm Neoprene, each cover is laminated with dark gray spandex and classically finished with a woven "JL Audio / How we play" trim label. Designed to protect the finish of your investments, this marine-ready material features tiny laser-cut holes at the bottom that are just big enough to let water drain out, and purposely small enough to never let insects in. A single, high-quality #5 zipper with locking slider on the front facilitates quick and easy covering or removal. This case is the perfect solution to problematic dust, grime and other environmental invaders that can be harmful to your speaker while your boat is docked or trailered.Owners of ETXv2/v3 Enclosed Speaker Systems, these are for you.Designed to work with any mounting clamp/application.Sold in pairs.Care Instructions: Rinse with clean, fresh water and air dry. Do not expose to harsh chemicals or cleaning agents.Normalized SKU: 0101383400UPC Code: 699440958509

JL Audio 010-13700-00 AccessoriesEnclosed Speaker System Light Caps for 8.8" ETXv3 Models - M-LCB-C-WTake your ETXv3 speaker systems to the next level with these light caps.Purpose-built for 8.8-inch ETXv3 enclosures, each cap features machined aluminum construction and a built-in, down-firing LED strip to illuminate the area below with brilliant white light. Installation requires just a single hole to be drilled. For retrofitting, each light cap can be mounted over an enclosure’s existing rear logo cap.Note: Independent light cap functionality is not compatible with M3 or M6 ETXv3 systems equipped with RGB LED lighting.*Sold as a pair*Adds 0.741" of thickness to the rear of each enclosure. Normalized SKU: 0101370000UPC Code: 699440912464

JL Audio 010-13699-00 AccessoriesEnclosed Speaker System Light Caps for 7.7" ETXv3 & 6.5" VeX™ Models - M-LCA-C-WTake your ETXv3 and VeX™ speaker systems to the next level with these light caps.Purpose-built for 7.7-inch ETXv3 and VeX™ enclosures, each cap features machined aluminum construction and a built-in, down-firing LED strip to illuminate the area below with brilliant white light. Installation requires just a single hole to be drilled. For retrofitting, each light cap can be mounted over an enclosure’s existing rear logo cap.Note: Independent light cap functionality is not compatible with M3 or M6 ETXv3 and VEX™ systems equipped with RGB LED lighting.*Sold as a pair*Adds 0.655" of thickness to the rear of each enclosure. Normalized SKU: 0101369900UPC Code: 699440912457

JL Audio 010-13551-00 AccessoriesDigital Preset Controller for JLiD™ Compatible Products - M-DRC-50The M-DRC-50 is a panel-mount, wired digital preset controller designed to connect to the JLid™ port of compatible JL Audio electronics.Features: Provides easy, push-button selection of stored DSP presets for compatible JL Audio electronics Built-in RGB LED indicator displays selected preset by color Weatherproof construction (IP66 rated, from the front, when properly installed) One-hole mount design accommodates panels up to 3/4" (19 mm) thick 18 ft. (5.5 m) control cable included, with protective connection sleeve Powered via the JLid™ connection; separate power wiring is not needed. The M-DRC-50 is compatible with the following JL Audio products:  MVi-HUB: Connects to the JLid™ COMM Port  MVi Amplifiers*: Connects to the JLid™ COMM Port  *Not compatible with mono MV amplifiers. Normalized SKU: 0101355100UPC Code: 699440999472

JL Audio 010-13430-00 Accessories6' Cable for Connection of Non-NMEA 2000® Remote Controllers with MediaMaster® - MMC-6Cable for connection of non-NMEA 2000® remote controllers with MediaMaster® source units - 6 ft (1.83 m). Normalized SKU: 0101343000UPC Code: 699440999144