JL Audio 010-03120-00 AmplifiersXDM Series 600w 6 Channel 24v Amplifier - XDM600/6-24VFor 24V systems only100 W x 6 @ 2 Ω / 75 W x 6 @ 4 Ω - 28.8VThe incredibly flexible XDM600/6-24V packs a serious full-range wallop and delivers a stunning 100 watts to each of its six channels into 2 ohms (28.8V, 1% THD). The technology that makes this much power possible in such a compact chassis is our advanced NexD™ high-speed switching design, which permits full bandwidth Class D operation with extremely low distortion and remarkable efficiency.Suitable for car or boat installations, the XDM600/6-24V is built with marine-grade materials and features an exclusive, dual-mode input filter for noise-free performance in boats or cars. Automatic turn-on capability (via signal sensing or DC-offset sensing) is also onboard for easy factory system upgrades.With the XDM600/6-24V, you have plenty of great use options. Configure it as a six-channel satellite amplifier with 75 W x 6 @ 4 Ω, or bridge four of its channels to create a staggered power four-channel amplifier with 200 W x 2 @ 4 Ω for your front satellites and 75 W x 2 @ 4 Ω for your rear satellites. You can also drive two subwoofers with 200 W each, plus a pair of satellites with 75W x 2.The XDM600/6-24V includes a 12 dB / octave filter for each channel bank, which can be configured as a low-pass or high-pass filter and offers continuously variable cutoff frequency selection from 50-500 Hz. With the addition of an optional HD-RLC or MHD-RLC (water-resistant) remote level controller (each sold separately), you have the ability to adjust the level of two, four, or all six amplifier channels directly from the driver's seat or cockpit.Finished in a sleek, black powder-coat, all controls are protected beneath a gasketed, removable top cover for easy access.This amplifier is designed for operation in vessels with 24 volt, negative-ground electrical systems. Use of this product in vessels with positive ground and/or voltages other than 24 volt may result in damage to the product and will void the warranty. Normalized SKU: 0100312000UPC Code: 699440986885

JL Audio 010-03118-00 AmplifiersXDM Series 700w 5 Channel Amplifier - XDM700/575 W x 4 @ 4 Ω + 300 W x 1 @ 2 Ω - 14.4VThe XDM700/5 is ideal for a complete audiophile-grade, subwoofer + four satellite system, and fits comfortably in just about any vehicle or vessel. With this incredible little amplifier, you can drive two pairs of quality component speaker systems with plenty of clean power (75 W x 4 @ 4 Ω), while also generating a solid 300 W of power for a subwoofer system. The technology that makes this much power possible in such a small chassis is our high-speed NexD™ switching amplifier design.Suitable for car or boat installations, the XDM700/5 is built with marine-grade materials and features an exclusive, dual-mode input filter for noise-free performance in boats or cars. Automatic turn-on capability (via signal sensing or DC-offset sensing) is also onboard for easy factory system upgrades.The XDM700/5 includes a 12 dB / octave high-pass filter for one main channel pair, a 12 dB octave high-pass or bandpass filter for the other main channel pair, plus a variable slope low-pass filter for its subwoofer channel. All three filters offer continuously variable cutoff frequency selection from 50-500 Hz. This amplifier's filters can also be configured as a true 3-way crossover, with a low-pass filter for the subwoofer channel, a bandpass filter on Ch. 3 & 4, and a high-pass filter on Ch. 1 & 2. An "x10" multiplier switch on the Ch. 1 & 2 high-pass filter allows its cutoff frequency to be adjusted from 50-500 Hz or 500-5000 Hz. With the addition of an optional HD-RLC or MHD-RLC (water-resistant) remote level controller (each sold separately), you have the ability to adjust the level of all amplifier channels or just the subwoofer channel directly from the driver's seat or helm.Finished in a sleek, black powder-coat, all controls are protected beneath a gasketed, removable top cover for easy access. Normalized SKU: 0100311800UPC Code: 699440986854

JL Audio 010-03119-00 AmplifiersXDM Series 800w 8 Channel Amplifier - XDM800/8100 W x 8 @ 2 Ω / 75 W x 8 @ 4 Ω - 14.4V The ultra-versatile XDM800/8 delivers eight channels of crystal-clear, full-range power and is capable of delivering a whopping 100 watts to each of its channels @ 2 ohms (14.4V, 1% THD). The technology that makes this much power possible in such a compact chassis is our advanced NexD™ high-speed switching design, which permits full bandwidth Class D operation with extremely low distortion and remarkable efficiency.Suitable for car or boat installations, the XDM800/8 is built with marine-grade materials and features an exclusive, dual-mode input filter for noise-free performance in boats or cars. Automatic turn-on capability (via signal sensing or DC-offset sensing) is also onboard for easy factory system upgrades.The XDM800/8 includes a 12 dB / octave filter for each channel bank, which can be configured as a low-pass or high-pass filter, and offers continuously variable cutoff frequency selection from 50-500 Hz. With the addition of an optional HD-RLC or MHD-RLC (water-resistant) remote level controller (each sold separately), you can adjust the level of two, four, or all eight amplifier channels directly from the driver's seat or cockpit.Here are a few examples of how the XDM800/8 can be used: Eight-channel Satellite Amp: drive four pairs of speakers with 75 W x 8 Big Four-Channel Satellite Amp: bridge to produce 200W x 4 @ 4Ω Six-Channel System Amp: drive front and rear satellites with 75 W x 4 @ 4Ω, plus two 4Ω subwoofers with 200 W each Staggered Six-Channel Satellite Amp: drive front speakers with 200 W x 2 @ 4Ω, plus four 4Ω speakers with 75 W each Staggered Five-Channel Satellite Amp: drive three front speakers with 200 W @ 4Ω + rear speakers with 75 W x 2 Four-Channel System Amp: drive left and right speakers with 200W x 2 @ 4Ω, plus two 4Ω subwoofers with 200W each Finished in a sleek, black powder coat, all controls are protected beneath a gasketed, removable top cover for easy access. Normalized SKU: 0100311900UPC Code: 699440986861

JL Audio 010-03117-00 AmplifiersXDM Series 600w 6 Channel Amplifier - XDM600/6100 W x 6 @ 2 Ω / 75 W x 6 @ 4 Ω - 14.4VThe incredibly flexible XDM600/6 packs a serious full-range wallop and delivers a stunning 100 watts to each of its six channels into 2 ohms (14.4V, 1% THD). The technology that makes this much power possible in such a compact chassis is our advanced NexD™ high-speed switching design, which permits full bandwidth Class D operation with extremely low distortion and remarkable efficiency.Suitable for car or boat installations, the XDM600/6 is built with marine-grade materials and features an exclusive, dual-mode input filter for noise-free performance in boats or cars. Automatic turn-on capability (via signal sensing or DC-offset sensing) is also onboard for easy factory system upgrades.With the XDM600/6, you have plenty of great use options. Configure it as a six-channel satellite amplifier with 75 W x 6 @ 4 Ω, or bridge four of its channels to create a staggered power four-channel amplifier with 200 W x 2 @ 4 Ω for your front satellites and 75 W x 2 @ 4 Ω for your rear satellites. You can also drive two subwoofers with 200 W each, plus a pair of satellites with 75W x 2.The XDM600/6 includes a 12 dB / octave filter for each channel bank, which can be configured as a low-pass or high-pass filter and offers continuously variable cutoff frequency selection from 50-500 Hz. With the addition of an optional HD-RLC or MHD-RLC (water-resistant) remote level controller (each sold separately), you have the ability to adjust the level of two, four, or all six amplifier channels directly from the driver's seat or cockpit.Finished in a sleek, black powder-coat, all controls are protected beneath a gasketed, removable top cover for easy access. Normalized SKU: 0100311700UPC Code: 699440986847

JL Audio 010-03115-00 AmplifiersXDM Series 400w 4 Channel Amplifier - XDM400/4100 W x 4 @ 2 Ω / 75 W x 4 @ 4 Ω - 14.4VThe ultra-compact XDM400/4 packs a serious full-range punch, generating a whopping 100 watts to each of its four channels into 2 ohms (14.4V, 1% THD). The technology that makes this much power possible in such a compact chassis is our advanced NexD™ high-speed switching design, which permits full bandwidth Class D operation with extremely low distortion and remarkable efficiency.Suitable for car or boat installations, the XDM400/4 is built with marine-grade materials and features an exclusive, dual-mode input filter for noise-free performance in boats or cars. Automatic turn-on capability (via signal sensing or DC-offset sensing) is also onboard for easy factory system upgrades.Combine the XDM400/4 with our XDM600/1 monoblock to build a stunning 1000 W amplification system to power four satellites and a subwoofer... and fit the whole thing under a seat or deck. Or, use the XDM400/4 by itself to power two satellites, plus a subwoofer. The XDM400/4 includes a 12 dB / octave filter for each channel bank, which can be configured as a low-pass or high-pass filter and offers continuously variable cutoff frequency selection from 50-500 Hz. With the addition of an optional HD-RLC or MHD-RLC (water-resistant) remote level controller (each sold separately), you have the ability to adjust the level of all amplifier channels or just the rear channels directly from the driver's seat or cockpit.Finished in a sleek, black powder-coat, all controls are protected beneath a gasketed, removable top cover for easy access. Normalized SKU: 0100311500UPC Code: 699440986816

JL Audio 010-03114-00 AmplifiersXDM Series 200w 2 Channel Amplifier - XDM200/2100 W x 2 @ 2 Ω / 75 W x 2 @ 4 Ω - 14.4V The tiny XDM200/2 packs a serious full-range punch, delivering a staggering 100 watts per channel into 2 ohms (14.4V, 1% THD). The technology that makes this much power possible in such a compact chassis is our advanced NexD™ high-speed switching design, which permits full bandwidth Class D operation with extremely low distortion and remarkable efficiency.Suitable for car or boat installations, the XDM200/2 is built with marine-grade materials and features an exclusive, dual-mode input filter for noise-free performance in boats or cars. Automatic turn-on capability (via signal sensing or DC-offset sensing) is also onboard for easy factory system upgrades.The XDM200/2 includes a 12 dB / octave filter which can be configured as a low-pass or high-pass filter and offers continuously variable cutoff frequency selection from 50-500 Hz. With the addition of an optional HD-RLC or MHD-RLC (water-resistant) remote level controller (each sold separately), the amplifier's level can be adjusted directly from the driver's seat or cockpit.Finished in a sleek, black powder-coat, all controls are protected beneath a gasketed, removable top cover for easy access. Normalized SKU: 0100311400UPC Code: 699440986793

JL Audio 010-03113-00 AmplifiersXDM Series 1000w 5 Channel Amplifier - XDM1000/5100 W x 4 @ 2 Ω + 600 W x 1 @ 2 Ω - 14.4VThe XDM1000/5 delivers up to 1000 W of clean power and is ideal for an audiophile-grade, subwoofer + four satellite system. With this potent powerhouse, you can drive two pairs of quality component speaker systems with plenty of clean power (75 W x 4 @ 4 Ω), while also generating a stout 600 W of power for a subwoofer system. The technology that makes this much power possible in such a small chassis is our high-speed NexD™ switching amplifier design.Suitable for car or boat installations, the XDM1000/5 is built with marine-grade materials and features an exclusive, dual-mode input filter for noise-free performance in boats or cars. Automatic turn-on capability (via signal sensing or DC-offset sensing) is also onboard for easy factory system upgrades.The XDM1000/5 includes a 12 dB / octave high-pass filter for one main channel pair, a 12 dB octave high-pass or bandpass filter for the other main channel pair, plus a variable slope low-pass filter for its subwoofer channel. All three filters offer continuously variable cutoff frequency selection from 50-500 Hz. This amplifier's filters can also be configured as a true 3-way crossover, with a low-pass filter for the subwoofer channel, a bandpass filter on Ch. 3 & 4, and a high-pass filter on Ch. 1 & 2. An "x10" multiplier switch on the Ch. 1 & 2 high-pass filter allows its cutoff frequency to be adjusted from 50-500 Hz or 500-5000 Hz. With the addition of an optional HD-RLC or MHD-RLC (water-resistant) remote level controller (each sold separately), you have the ability to adjust the level of all amplifier channels or just the subwoofer channel directly from the driver's seat or helm.Finished in a sleek, black powder-coat, all controls are protected beneath a gasketed, removable top cover for easy access. Normalized SKU: 0100311300UPC Code: 699440986786

JL Audio 010-03104-00 AmplifiersMHD Series 600w 4 Channel 24v Full-Range Amplifier - MHD600/4-24vFor 24v Systems Only150 W x 4 @ 1.5-4 ΩULTRACOMPACT AND ULTRAPOWERFULCombining our Single Cycle Control™ and R.I.P.S.™ power supply technologies, MHD amplifiers deliver world-class, full-range fidelity and high-power output from an incredibly small package.Features High-fidelity Class-D design delivers superb sonics Intelligently optimized for all the power - all the time Full suite of studio-grade signal processing on board Unique design adjusts operation to avoid thermal events Exceeds international standards for salt fog and UV exposure 3-Year Warranty Single Cycle ControlGround breaking technology applies output correction more than 400,000 times per second to deliver exceptional audio quality with reduced current draw and heat.R.I.P.S. TechnologyRegulated, Intelligent Power Supply is a tightly controlled design that maintains full power output from 1.5 to 4 ohms per channel and at any supply voltage from 11 to 14.5 volts.Studio-Grade Signal ProcessingSelectable 12 dB/octave (Butterworth) or steep 24 dB/octave (Linkwitz-Riley) filters with calibrated potentiometer to best integrate with subwoofers and component systems.Differential-Balanced InputsA versatile design accepts speaker level signals without a line-output converter; it also delivers outstanding noise rejection while preventing alternator whine and other noises.Advanced Rollback ProtectionInnovative circuit design ensures that the amplifier will never shut down as a result of thermal overload and keeps the music playing, even under the most demanding conditions.Built for the ElementsAn all-aluminum, powder-coated housing with marine-grade hardware inhibits corrosion, and a watertight security cover protects all controls from the harshest of seasons.Powerfully NeatAll MHD models share the same compact dimensions, making them far easier to place.Realsink™ ChassisThe heat sink design requires no fans and permits stacking without losing cooling ability.Designed To FitRemovable power and speaker plugs aid installations in tight spaces.In The Box MHD amplifier Power input plug Speaker connection plug(s) Four mounting feet 2.5 mm Allen wrench 4 mm Allen wrench Four machine screws JL Audio badge Specifications Channels: 4 Physical Dimensions (Height): 1.93" Physical Dimensions (Width): 10.74" Physical Dimensions (Depth): 7.85" Weight: 6.6 lbs Warranty: 3-Year Operating Voltage: 22-29 VDC Audio Amplifier Class: Class D Rated Continuous (RMS) Power: 150 W x 4/300 W x 2 (Bridged) Fuse Rating: 25 A Recommended Fuse Types: AFS, AGU or MaxiFuse™ Min. Copper Power/Ground Wire Gauge: 4 AWG wire Normalized SKU: 0100310400UPC Code: 699440982276

JL Audio 010-03103-00 AmplifiersMHD Series 900w 5 Channel Full-Range Amplifier - MHD900/5100 W x 4 + 500 W x 1ULTRACOMPACT AND ULTRAPOWERFULCombining our Single Cycle Control™ and R.I.P.S.™ power supply technologies, MHD amplifiers deliver world-class, full-range fidelity and high-power output from an incredibly small package.Features High-fidelity Class-D design delivers superb sonics Intelligently optimized for all the power - all the time Full suite of studio-grade signal processing on board Unique design adjusts operation to avoid thermal events Exceeds international standards for salt fog and UV exposure 3-Year Warranty Single Cycle ControlGround breaking technology applies output correction more than 400,000 times per second to deliver exceptional audio quality with reduced current draw and heat.R.I.P.S. TechnologyRegulated, Intelligent Power Supply is a tightly controlled design that maintains full power output from 1.5 to 4 ohms per channel and at any supply voltage from 11 to 14.5 volts.Studio-Grade Signal ProcessingSelectable 12 dB/octave (Butterworth) or steep 24 dB/octave (Linkwitz-Riley) filters with calibrated potentiometer to best integrate with subwoofers and component systems.Differential-Balanced InputsA versatile design accepts speaker level signals without a line-output converter; it also delivers outstanding noise rejection while preventing alternator whine and other noises.Advanced Rollback ProtectionInnovative circuit design ensures that the amplifier will never shut down as a result of thermal overload and keeps the music playing, even under the most demanding conditions.Built for the ElementsAn all-aluminum, powder-coated housing with marine-grade hardware inhibits corrosion, and a watertight security cover protects all controls from the harshest of seasons.Powerfully NeatAll MHD models share the same compact dimensions, making them far easier to place.Realsink™ ChassisThe heat sink design requires no fans and permits stacking without losing cooling ability.Designed To FitRemovable power and speaker plugs aid installations in tight spaces.In The Box MHD amplifier Power input plug Speaker connection plug(s) Four mounting feet 2.5 mm Allen wrench 4 mm Allen wrench Four machine screws JL Audio badge Specifications Channels: 5 Physical Dimensions (Height): 1.93" Physical Dimensions (Width): 10.74" Physical Dimensions (Depth): 7.85" Weight: 6.85 lbs Warranty: 3-Year Operating Voltage: 11-14.5 VDC Audio Amplifier Class: Class D Rated Continuous (RMS) Power: Main: 100 W x 4/Sub: 500 x 1 Fuse Rating: 60 A Recommended Fuse Types: AFS, AGU or MaxiFuse™ Min. Copper Power/Ground Wire Gauge: 4 AWG wire Normalized SKU: 0100310300UPC Code: 699440982269

Download LiteratureBoss Audio MPD380.4 AmplifiersElite 380W 4 Channel Class D AmplifierBoss Audio Systems MPD380.4 4 Channel Marine Amplifier - Class D, 380 High Output, IP66 Rated, 2 Ohm Stable, Low-Level Inputs, High/Low Pass Crossover.Features: 4/3/2 Channel Full-Range, Class D PWM MOSFET Power Supply RCA Level Inputs HP & LP Filters Bass Boost Input Sensitivity Bridgeable LED Illuminated End Panels IP66-Rated (Dustproof/Weatherproof) Thermal, Short, and Overload Protection Circuits Specifications:Dimensions Features: Overall: 9.76"x 5.12" x 1.97" (248 x 130 x 50 mm) Normalized SKU: MPD3804UPC Code: 791489133531Boss Audio MPD380.4 Literature Download Quick Reference Guide

Rockford Fosgate M5-800X4 Marine Element Ready design stands up to water, dust, mud, and UV rays Dynamic Power ratings deliver more output where you actually hear it Constant Power, Class-BD, and C.L.E.A.N., all engineered, developed, and validated in Tempe, Arizona Full 2-year warranty Normalized SKU: M5800X4UPC Code: 780687357962

Rockford Fosgate PM1000X5 MarinePM1000X5 Punch Series Multi Channel Amplifier1,000 Watt Class-bd 5-Channel AmplifierThe PM1000X5 is a 500 Watt 5-channel amplifier with high dynamic power using Class-a/b technology on the front/rear channels, Class-bd for the subwoofer channel, and a conformal coated pc board designed for motorsport and marine applications.Features: High level input capable with Auto Turn-On circuit Features C.L.E.A.N. Set-up Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator) 12dB/octave Butterworth crossover On-board Punch EQ with +18dB boost @ 45Hz. Muted turn on Stealth top mounted control panel Cast aluminum heatsink Short circuit protection Over current protection Infrasonic filter 2/4 channel input switch Marine grade two part epoxy coating on circuit boards Marine grade stainless steel hardware 1 Year Standard Warranty Normalized SKU: PM1000X5UPC Code: 780687345211

Rockford Fosgate PM300X2 MarinePM300X2 Punch Series 300 Watt 2-Channel AmplifierThe PM300X2 is a 300 Watt 2-channel amplifier with high dynamic power using Class-a/b technology and a conformal coated pc board designed for motorsport and marine applications.Features: High level input capable with Auto Turn-On circuit RCA pass-thru outputs Features C.L.E.A.N. Set-up Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator) 12dB/octave Butterworth crossover On-board Punch EQ with +18dB boost @ 45Hz. Muted turn on Stealth top mounted control panel Cast aluminum heatsink Short circuit protection Over current protection Marine grade two part epoxy coating on circuit boards Marine grade stainless steel hardware 1 Year Standard Warranty Normalized SKU: PM300X2UPC Code: 780687345075

Rockford Fosgate PM500X2 MarinePM500X2 Punch Series 500 Watt 2-Channel AmplifierThe PM500X2 is a 500 Watt 2-channel amplifier with high dynamic power using Class-a/b technology and a conformal coated pc board designed for motorsport and marine applications.Features: High level input capable with Auto Turn-On circuit RCA pass-thru outputs Features C.L.E.A.N. Set-up Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator) 12dB/octave Butterworth crossover On-board Punch EQ with +18dB boost @ 45Hz. Muted turn on Stealth top mounted control panel Cast aluminum heatsink Short circuit protection Over current protection Marine grade 2-part epoxy coated PCB Marine grade stainless steel hardware 1 Year Standard Warranty Normalized SKU: PM500X2UPC Code: 780687345112

Rockford Fosgate PM400X4 Marine PM400X4 Punch Series 400 Watt 4-Channel AmplifierThe PM400X4 is a 400-watt 4-channel amplifier with high dynamic power using Class-a/b technology and a conformal coated pc board designed for motorsport and marine applications.Features: High-level input capable with Auto Turn-On circuit Features C.L.E.A.N. Set-up 12dB/octave Butterworth crossover On-board Punch EQ with +18dB boost @ 45Hz. Muted turn on Stealth top-mounted control panel Cast aluminum heatsink Short circuit protection Over current protection Marine grade two-part epoxy coating on circuit boards Marine-grade stainless steel hardware 1-Year Standard Warranty Normalized SKU: PM400X4UPC Code: 780687345099