Advance Adhesive Technologies AAT-390-4G Adhesives & SealantsAdvanced Adhesive Technologies' AAT-390 is a solvent free, copolymer adhesive specifically designed for the professional installation of marine carpets and sheet vinyl. AAT-390 offers excellent resistance to moisture when fully cured. AAT-390 is compatible with most carpet backings and felt back sheet goods. AAT-390 is non-flammable, freeze - thaw stable (if allowed to freeze, thaw out at room temperature (70oF+) before using, do not stir adhesive while ice crystals are present). This adhesive is protected by the CleanGuard two-stage antimicrobial. CleanGuard is a specifically formulated broad-spectrum, anti-microbial agent that protects our adhesives and sealers from microorganisms, such as mold or mildew, in both the wet and dry state. Designed for the professional installation of marine carpets and sheet vinyl Solvent-free Can be used indoors or outdoors See long description for compatible surfaces Size: 4 gallon Normalized SKU: AAT3904GUPC Code: 016088390407

Loctite-Permatex 99070 Adhesives & SealantsThe Right Stuff® Professional Installer SystemMake leak-proof gaskets and return equipment to service immediately! The Right Stuff is our most advanced gasket maker. It eliminates the need to wait for the gasket maker to cure - just reassemble and go! The elastomeric "formed-in-place" material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. Formulated to meet or exceed performance standards for long-term sealability, durability and handling, this material is used on OEM production lines and specified in their service parts programs. Temperature range -75°F to 450°F (-59°C to 232°C) continuous, 500°F (260°C) intermittent; resists ATF, coolant, oil and other shop fluids. Sensor-safe. Fleet-tested. Features: Seals instantly, forming a reliable, long lasting elastomeric rubber gasket; eliminates the need for pre-formed, pre-cut, paper, rubber or cork gaskets Blowout resistant, allowing leakproof gaskets to be made in just one minute; protects against leaks and seepage caused by vibration and thermal expansion Formulated to meet or exceed performance standards for long-term sealability, durability and handling; this material is used on OEM production lines and specified in their service parts programs Temperature Range: -75°F to 450°F (-59°C to 232°C) continuous, 500°F (260°C) intermittent Suggested Applications: Automotive, heavy duty, and marine gaskets, valve covers, gearbox covers, pumps, oil pans, thermostat housings, water pumps Normalized SKU: 99070UPC Code: 686226990709

Loctite-Permatex 85915 Adhesives & SealantsHigh-Temp Red RTV Silicone Gasket - 7.25ozOEM specified. Formulated for hi-temp applications, or heavy-duty use (such as towing, etc.). Replaces almost any cut gasket by making reliable “formed-in-place” gaskets that resist cracking, shrinking and migrating caused by thermal cycling. Coats pre-cut gaskets to increase reliability. Temperature range -65ºF to 650ºF (-54°C to 343°C) intermittent; resists auto and shop fluids. Applications:Automobile - Suggested Applications: Valve covers, oil pans, timing covers, thermostat housingsDirections:Surfaces should be clean & dry. Apply a continuous, uniform 1/16” to 1/4” bead of silicone, surrounding all bolt holes. 1/8” is suitable for most applications. Bead size may be varied by finger pressure, how quickly applicator is moved and angle. For heavier beads, nozzle may be cut to size. Activate PowerBead™ by twisting nozzle one full turn counterclockwise, raising trigger. Press trigger to dispense. Assemble parts immediately while silicone is still wet. Silicone will fully cure in 24 hours. After use, store applicator by twisting nozzle clockwise, wiping away excess silicone & replacing plastic cap with a “click”.NOTE: Not recommended for use on head gaskets or parts in contact with gasoline. Normalized SKU: 85915UPC Code: 686226859150

Loctite-Permatex 85913 Adhesives & SealantsClear RTV Silicone Adhesive Sealant - 7.25ozGeneral-purpose, clear RTV indoor/outdoor sealant. Seals, bonds, repairs, mends and secures glass, metal, plastics, fabric, vinyl, weather stripping and vinyl tops. May be applied to horizontal or vertical surfaces. Waterproof and flexible. Temperature range -75°F to 400°F (-59°C to 204°C); resists oil, water, weather, vibration, grease. Applications: Automobile - Suggested Applications: Door frames, vinyl tops, seams and roofs (Not recommended for engine gasket or electrical connection applications). Heavy Duty - Suggested Applications: Windshields Marine - Suggested Applications: Windshields, hatches, seams and roofs Directions:Surfaces should be clean and dry. Apply silicone with a continuous,uniform flow. Bead size may be varied by finger pressure, how quickly applicator is moved and angle. For heavier beads,nozzle may be cut to size. Activate PowerBead™ by twisting nozzle one full turn counterclockwise, raising trigger. Press trigger to dispense. Assemble parts immediately while silicone is still wet. Surfaces being bonded may require clamping until silicone is firm. Silicone“skins” and becomes tack-free in one hour. Allow 24 hours for full cure under normal conditions, longer in cold or dry conditions.After use, store applicator by twisting nozzle clockwise, wiping away excess silicone and replacing plastic cap with a “click”. Normalized SKU: 85913UPC Code: 686226859136

Loctite-Permatex 85519 Adhesives & SealantsUltra Blue® Multipurpose RTV Silicone Gasket Maker - 7.5ozOEM specified. Designed specially for high-torque and high vibration applications, like those common in import engines, this premium RTV gasket maker exceeds manufacturer performance requirements. Sensorsafe, low odor, and noncorrosive. Maximum vibration resistance, with outstanding resistance to oils, cooling and shop fluids. Guaranteed not to leak. Temperature range -65ºF to 500ºF (-54°C to 260°C) intermittent. Applications: Automobile - Suggested Applications: Valve covers, oil pans, and timing covers. Marine - Suggested Applications: Valve covers, oil pans, intake manifold end seals, timing covers, water pumps, thermostat housings Directions:Surfaces should be clean & dry. Activate PowerBead™ by twisting nozzle one full turn counterclockwise, raising trigger. Press trigger to dispense. Apply a continuous, uniform 1/16” to 1/4” bead of silicone, surrounding all bolt holes. 1/8” is suitable for most applications. Bead size may be varied by finger pressure, how quickly applicator is moved and angle. For heavier beads, nozzle may be cut to size. Assemble parts immediately. Finger tighten bolts until material begins to squeeze out around flange. Allow to dry for 1 hour then retighten 1/4 to 1/2 turn. Silicone will fully cure in 24 hours. After use, store applicator by twisting nozzle clockwise, wiping away excess silicone & replacing plastic cap with a “click”.NOTE: Not recommended for use on head gaskets or parts in contact with gasoline. Normalized SKU: 85519UPC Code: 686226855190

Loctite-Permatex 85224 Adhesives & SealantsPowerbread The Right Stuff® Instant Gasket Maker - Black - 7.5ozMake leak-proof gaskets and return equipment to service immediately! Permatex premier instant gasket maker was designed as a replacement for conventional gaskets. This elastomeric “formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. Formulated to meet or exceed performance standards for long-term salability, durability and handling, this material is used on OEM production lines and specified in their service parts programs. Temperature range -75°F to 450°F (-59°C to 232°C) continuous, 500°F (260°C) intermittent; resists ATF, coolant, oil and other shop fluids. Sensor-safe. Compared to Permatex® the Right Stuff® GREY Gasket Maker, our Black formula offers higher oil resistance and retains greater flexibility. This makes it best for older, higher displacement engines. Applications:Automobile - Suggested Applications: Automotive, heavy duty, and marine gaskets, valve covers, gearbox covers, pumps, oil pans, thermostat housings, water pumps.Motorcycle - Suggested Applications: Transmission housing cover, clutch release coverHeavy Duty - Suggested Applications: Case covers, power divider shaft housings, input/output power shafts, PTO covers to housing, cover housing gasket, differential, assembly to rear axle housing, power dividers, axle shaft flangesDirections:Clean and dry parts. Push nozzle to dispense the Right Stuff®. Apply a continuous 1/8″ to 1/4″ bead to one surface, surrounding all bolt holes. Assemble parts within five minutes, tightening bolts to recommended torque levels. Material will fill any surface imperfection. Equipment can be returned to service immediately. To reuse package, leave a 1/2″ length of material extending out of the nozzle. Cured material will form a protective plug. To reuse, carefully remove the plug and dispense as before.NOTE: Not for use as a head gasket or on parts in contact with gasoline. Normalized SKU: 85224UPC Code: 686226852243

Loctite-Permatex 85084 Adhesives & SealantsUltra Grey® Rigid High-Torque RTV Silicone Gasket Maker - 9.5ozOEM specified. Permatex® Ultra silicones were developed to meet today's technology changes. Sensor-safe, low odor, noncorrosive. Outstanding oil resistance and joint movement tolerance. Eight times more flexible than cork/composite gaskets; three times more oil resistant than conventional silicones. Temperature range -65ºF to 500ºF (-54°C to 260°C) intermittent; resists auto and shop fluids and vibration. Applications: Automobile - Suggested Applications: Valve covers, oil pans, automatic transmission pans, intake manifold end seals, timing covers, water pumps, thermostat housings Heavy Duty - Suggested Applications: Cover housing gasket, differential, assembly to rear axle housing, power dividers, axle shaft flanges Directions:Surfaces should be clean & dry. Apply a continuous, uniform 1/16” to 1/4” bead of silicone, surrounding all bolt holes. 1/8” is suitable for most applications. Bead size may be varied by finger pressure, how quickly applicator is moved and angle. For heavier beads, nozzle may be cut to size. Activate PowerBead™ by twisting nozzle one full turn counterclockwise, raising trigger. Press trigger to dispense. Assemble parts immediately while silicone is still wet. Silicone will fully cure in 24 hours. After use, store applicator by twisting nozzle clockwise, wiping away excess silicone and replacing plastic cap with a “click”.NOTE: Not recommended for use on head gaskets or parts in contact with gasoline. Normalized SKU: 85084UPC Code: 686226850843

Loctite-Permatex 85080 Adhesives & SealantsUltra Black® Maximum Oil Resistance RTV Silicone Gasket MakerOEM specified. For dealership warranty requirements, Ultra Black® ensures extended drivetrain warranty compliance. Fast-curing formula. Sensor-safe, low odor, noncorrosive. Meets performance specs of OE silicone gaskets. Retains high flexibility, oil resistant properties through use of a patented adhesion system. Temperature range -65°F to 500°F (-54°C to 260°C) intermittent; resists auto and shop fluids and vibration. Applications: Automobile - Suggested Applications: Valve covers, oil pans, intake manifold end seals, timing covers, differential covers Marine - Suggested Applications: Valve covers, oil pans, intake manifold end seals, timing covers, water pumps, thermostat housings Directions: For best results, clean and dry all surfaces with a residue-free solvent, such as Permatex® Brake & Parts Cleaner. Cut nozzle to desired bead size – gaskets are best formed using a 1/16″ to 1/4″ bead. Apply a continuous and even bead of silicone to one surface, surrounding all bolt holes. Remove excess with knife at once. Assemble parts immediately. Do not squeeze out silicone by over tightening bolts. Re-torque will not be necessary. Silicone dries in 1 hour, and fully cures in 24 hours, at 70% – 50% relative humidity. Allow more time in cold weather. Replace cap after use. Clean hands with dry cloth or Permatex® Fast Orange® Hand Cleaner. Clean tools with non-flammable cleaning fluid. NOTE: Not recommended for use on head gaskets or parts in contact with gasoline. Normalized SKU: 85080UPC Code: 686226850805

Loctite-Permatex 84209 Adhesives & SealantsSteel Weld™ Epoxy - GREY - 1ozVersatile, easy-to-use, multi-metal epoxy adhesive is two-part adhesive and filler system that eliminates the need for welding or brazing. Sets in four minutes, no clamping needed. Dark grey appearance. Fills gaps and will not shrink. When cured, can be drilled, sanded, threaded or filed. Resistant to water and solvents. Temperature range -60°F to 300°F (-51°C to 149°C). Permanent strength up to 4500 PSI. Applications:Automobile - Suggested Applications: Ideal for complex, multi-piece assemblies. Bonds rigid materials including aluminum, brass, chrome, copper, iron, stainless steel, steel. Use to seal welded seams, fills metal cracks, mount metal components.Directions:1. PROTECT: Work area must be protected from accidental spills. 2. CLEAN: Surfaces must be clean, dryand free of grease and oil. 3. PREPARE: Roughen smooth surfaces (using abrasives or sandpaper). 4. OPENPACKAGE: Remove tubes and use a sharp point to puncture seals. 5. DISPENSE: Squeeze tubes to dispense resin andhardener. Thoroughly mix resin & hardener on a clean, discardable surface for 2 to 3 minutes until evenly colored.6. APPLICATION: Apply a small amount of mixture to both surfaces and assemble parts immediately (working time isapproximately 4-6 min.). Remove any excess epoxy immediately. 7. CURE TIME: Usable strength is reached in fourhours at 72°F (22°C). Cooler temperatures may require longer set time. 8. CLEAN-UP: Attach nozzle caps and store inmolded tray. NOTE: Adhesive will not bond most polyethylene or polypropylene plastics. Normalized SKU: 84209UPC Code: 686226842091

Loctite-Permatex 84201 Adhesives & Sealants5 Minute Gap Filling Epoxy - .6ozVersatile, easy-to-use, general purpose epoxy adhesive is two-part adhesive and filler system that eliminates the need for welding or brazing. Sets in five minutes, no clamping needed. Clear appearance. Fills gaps and will not shrink. Resistant to water and solvents. Temperature range -60°F to 180°F (-51°C to 82°C). Permanent strength up to 3400 PSI. Self-mixing dual syringe (84164) blends the adhesive and filler as it dispenses, eliminating the need for manual mixing.Applications:Automobile - Suggested Applications: Ideal for complex, multi-piece assemblies. Bonds rigid materials including, ceramic, chrome, fabric, fiberglass, glass, hard plastic, metal and rubber.Directions: PROTECT: Work area must be protected from accidental spills. CLEAN: Surfaces must be clean, dry and free of grease and oil. PREPARE: Roughen smooth surfaces (using abrasives or sandpaper) OPEN PACKAGE: Remove tubes and use the back of cap or a sharp point to puncture seals. DISPENSE: Squeeze tubes to dispense resin and hardener. Thoroughly mix resin & hardener on a clean, discardable surface for 2 to 3 minutes until evenly colored. APPLICATION: Apply a small amount of mixture to both surfaces and assemble parts immediately (product sets in 4-6 minutes).Remove any excess epoxy immediately. CURE TIME: Usable strength is reached in four hours at72°F (22°C). Cooler temperatures may require longer set time. CLEAN-UP: Attach nozzle caps and store in molded tray. NOTE: Adhesive will not bond most polyethylene or polypropylene plastics. Normalized SKU: 84201UPC Code: 686226842015

Loctite-Permatex 84160 Adhesives & Sealants1 Minute General Purpose Gel Epoxy - .84ozGeneral Purpose 1 Minute Gel Epoxy is a fast setting, two-part adhesive and filler system specially formulated with a Blue Dye Indicator that disappears when it’s fully mixed and ready to use. The advanced gel formulation reduces mess and waste compared to traditional epoxies; unique indicator system takes the guesswork out of “ready to use”.Features: Non-drip formula allows for mess free application Can easily be applied to overhead and hard to reach places Sets in just 1 minute/Cures in 5 minutes Blue dye indicator disappears when epoxy is ready to apply No clamping required Bonds to metals, hard plastics, ceramics, and more! Applications:Automobile - Suggested Applications: Ideal for complex, multi-piece assemblies. Bonds rigid materials including, ceramic, chrome, fabric, fiberglass, glass, hard plastic, and metal and rubber.Directions: PROTECT: Work area must be protected from accidental spills. CLEAN: Surfaces must be clean, dry and free of grease and oil. PREPARE: Roughen smooth surfaces (using abrasives or sandpaper). OPEN PACKAGE: Remove Syringe. Turn syringe nozzle end up and pull plunger back slightly (1/8”). Allow air bubbles to rise to top. Snap off and save storage cap. Push plunger to dispense equal amounts of hardener and resin onto discard-able surface such as a piece of cardboard. Mixing paddle will pop out from plunger. Pull back plunger tostop flow. Snap cap back on. MIX QUICKLY: Quickly and thoroughly mix until blue color turns clear (about 15 sec).  APPLICATION: Apply small amount of mixture to both surfaces and assemble parts immediately (product sets in approximately 60 seconds). Remove any excess epoxy immediately. CURE TIME: Usable strength is reached in 1 hour at 72ºF (22ºC).Cooler temperatures may require longer set time. CLEAN-UP: Attach nozzle cap and store in molded tray. NOTE: Adhesive will not bond most polyethylene or polypropylene plastics. Normalized SKU: 84160UPC Code: 686226841605

Loctite-Permatex 82195 Adhesives & SealantsUltra Grey Rigid High Torque RTV Silicone - 13ozOEM specified. Permatex® Ultra silicones were developed to meet technology changes. Sensor-safe, low odor, noncorrosive. Outstanding oil resistance and joint movement tolerance. Eight times more flexible than cork/composite gaskets; three times more oil resistant than conventional silicones. Temperature range -65ºF to 500ºF (-54°C to 260°C) intermittent; resists auto and shop fluids and vibration. Applications: Automobile - Suggested Applications: Valve covers, oil pans, automatic transmission pans, intake manifold end seals, timing covers, water pumps, thermostat housings Heavy Duty - Suggested Applications: Cover housing gasket, differential, assembly to rear axle housing, power dividers, axle shaft flanges Directions: For best results, clean and dry all surfaces with a residue-free solvent such as Permatex® Brake & Parts Cleaner. Cut nozzle to desired bead size. Gaskets are best formed using a 1/16″ to 1/4″ (1.6 mm to 6.4 mm) bead. Apply a continuous, even bead of silicone to one surface, surrounding all bolt holes. Assemble parts immediately while silicone is still wet. Finger tighten until material begins to squeeze out around flange. Allow to dry for one hour, then retighten 1/4 to 1/2 turn. Silicone will skin over in one hour and fully cure in 24 hours, under normal conditions. Allow more time for cold or very dry conditions. Clean uncured silicone from hands, tools and clothing with Permatex® Fast Orange® Hand Cleaner. NOTE: Not recommended for use on head gaskets or on parts in contact with gasoline. Normalized SKU: 82195UPC Code: 686226821959

Loctite-Permatex 81725 Adhesives & SealantsUltra Blue® Multipurpose RTV Silicone Gasket Maker - 13ozOEM specified. Designed specially for high-torque and high vibration applications, like those common in import engines, this premium RTV gasket maker exceeds manufacturer performance requirements. Sensorsafe, low odor, and noncorrosive. Maximum vibration resistance, with outstanding resistance to oils, cooling and shop fluids. Guaranteed not to leak. Temperature range -65ºF to 500ºF (-54°C to 260°C) intermittent. Applications:Automobile - Suggested Applications: Valve covers, oil pans, and timing covers.Marine - Suggested Applications: Valve covers, oil pans, intake manifold end seals, timing covers, water pumps, thermostat housingsDirections:For best results, clean and dry all surfaces with a residue-free solvent, such as Permatex® Brake & Parts Cleaner. Cut nozzle to desired opening and insert into a standard caulking gun – gaskets are best formed using a 1/16" to 1/4" (2 to 6 mm) bead. Apply a continuous and even bead of silicone to one surface; surround all bolt holes. Assemble parts immediately. Finger tighten bolts until material begins to squeeze out around flange. Allow to dry for one hour then retighten 1/4 to 1/2 turn. Silicone dries in 1 hour, and fully cures in 24 hours. Allow more time in cold or very dry conditions. Clean hands with dry cloth or Permatex® Fast Orange® Hand Cleaner. Clean tools with non-flammable cleaning fluid.NOTE: Not recommended for use on head gaskets or parts in contact with gasoline. Normalized SKU: 81725UPC Code: 686226817259

Loctite-Permatex 80072 Adhesives & SealantsUndercoating Aerosol Can - 20ozProtects fenders, frames, fuel tanks, door panels, rocker panels, hoods and firewalls against moisture, road salt and corrosion. Will not sag or drip. Sound-proofs and insulates. Body shop proven. Level 3.Applications:Automobile - Suggested Applications: Wheel wells, rocker panels, frames and underbody, body repairs, rust holes, tree pruning, driveway cracks, minor roof repairs, and post preserver.Directions:Tap bottom of can to loosen agitator ball. If ball does not loosen, shake can until agitator ball is heard. Shake can for at least five (5) minutes after hearing agitator ball. For best adhesion, apply only to clean, dry surfaces. Apply a uniform coating, holding can 10 to 12 inches from surface. Multiple thin coats are most effective allowing 15 to 20 minutes between coats (shake well before reapplying). Allow to dry for 24 hours. Avoid application of any undercoating or rust proofing materials closer than 12 inches to any part of exhaust system or catalytic converter. NEVER spray directly onto exhaust system or catalytic converter. For cleanup, use mineral spirits or kerosene. This product is NOT considered paintable. Normalized SKU: 80072UPC Code: 686226800725

Loctite-Permatex 80071 Adhesives & SealantsAnti-Seize Lubricant Bottle - 4ozA highly refined blend of aluminum, copper and graphite lubricants. Use during assembly to prevent galling, corrosion and seizing due to weathering or chemicals. Anti-Seize assures easier disassembly. Temperature range: -60°F to 1600°F (-51°C to 871°C). Salt, corrosion and moisture resistant ideal for marine use. Non-aerosol version meets Mil Spec #907E. Aerosol – Level 3* Applications: Automobile - Suggested Applications: For easy removal of spark plugs, cylinder head and exhaust head bolts; apply to anchor pins on brake assemblies, u-bolts and spring bolts, hinges, gears, chain, sprockets, and rollers. Motorcycle - Suggested Applications: Axle assembly Heavy Duty - Suggested Applications: Prevents seizing and galling of all metals on chassis and engines. Withstands temperatures up to 1600°F. Marine - Suggested Applications: For easy removal of spark plugs, cylinder head and exhaust head bolts Directions:STIR WELL BEFORE USING. For best results, remove dirt, oil and grease. Apply Anti-Seize lubricant to parts that require protection. Wipe away excess lubricant. Normalized SKU: 80071UPC Code: 686226800718

Loctite-Permatex 800368 Adhesives & SealantsThe Right Stuff® Caulking GunMake leak-proof gaskets and return equipment to service immediately! Permatex premier instant gasket maker was designed as a replacement for conventional gaskets. This elastomeric “formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. Formulated to meet or exceed performance standards for long-term salability, durability and handling, this material is used on OEM production lines and specified in their service parts programs. Temperature range -75°F to 450°F (-59°C to 232°C) continuous, 500°F (260°C) intermittent; resists ATF, coolant, oil and other shop fluids. Sensor-safe. Fleet-tested.Applications: Automobile - Suggested Applications: Automotive, heavy duty, and marine gaskets, valve covers, gearbox covers, pumps, oil pans, thermostat housings, water pumps. Motorcycle - Suggested Applications: Transmission housing cover, clutch release cover Heavy Duty - Suggested Applications: Case covers, power divider shaft housings, input/output power shafts, PTO covers to housing, cover housing gasket, differential, assembly to rear axle housing, power dividers, axle shaft flanges Directions:Slice tip off cartridge. Attach and cut nozzle at desired opening at a 45° angle, and insert into a standard cauking gun. Normalized SKU: 800368

Loctite-Permatex 77164 Adhesives & SealantsNickel Anti-Seize Lubricant Brush Top Bottle - 16ozProtects metal parts from seizing and galling at temperatures up to 2400°F (1316°C). It is recommended where copper contamination must be avoided, under conditions of extreme pressure and temperature, and with stainless steel, titanium and nickel alloys. Applications:Automobile - Suggested Applications: Exhaust manifold bolts, exhaust system bolts, muffler clamps and tailpipe assemblies.Directions:STIR WELL BEFORE USING. For best results, remove dirt, oil and grease. Apply Anti-Seize lubricant to parts that require protection. Wipe away excess lubricant. Refer to Technical Data Sheet for additional information. Normalized SKU: 77164UPC Code: 686226771643

Loctite-Permatex 77124 Adhesives & SealantsNickel Anti-Seize Lubricant Brush Top Bottle - 8ozProtects metal parts from seizing and galling at temperatures up to 2400°F (1316°C). It is recommended where copper contamination must be avoided, under conditions of extreme pressure and temperature, and with stainless steel, titanium and nickel alloys. Applications:Automobile - Suggested Applications: Exhaust manifold bolts, exhaust system bolts, muffler clamps and tailpipe assemblies.Directions:STIR WELL BEFORE USING. For best results, remove dirt, oil and grease. Apply Anti-Seize lubricant to parts that require protection. Wipe away excess lubricant. Refer to Technical Data Sheet for additional information. Normalized SKU: 77124UPC Code: 686226771247

Loctite-Permatex 34311 Adhesives & SealantsThe Right Stuff® Grey Instant Gasket Maker - 5ozSpecifically designed to perform under higher torque loads associated with engines having closely spaced bolt patterns (typically import vehicles). This product is blowout resistant, allowing leakproof gaskets to be made and put into service in just one minute. Sensor-safe, the Right Stuff® GREY seals instantly, forming a reliable, long lasting elastomeric rubber gasket that outperforms precut gaskets. Specified by major import OEMs, this material is resistant to powertrain fluids (oil, coolant, and ATF) and operates in environments to 450°F (232°C) continuous; 500°F (260°C) intermittent.Applications:Automobile - Suggested Applications: Automotive gaskets, valve covers, oil pans, transmission pans, thermostat housings, water pumps, etc. Directions:Clean and dry parts. Slice tip off cartridge. Attach and cut nozzle at desired opening at a 45° angle, and insert into a standard cauking gun. Apply a continuous 1/8" to 1/4" bead to one surface, surrounding all bolt holes. Assemble parts within five minutes, tightening bolts to recommended torque levels. Material will fill any surface imperfection. To reuse package, leave a 1/2" length of material extending out of the nozzle. Cured material will form a protective plug. To reuse, carefully remove the plug and dispense as before.NOTE: Not for use as a head gasket or on parts in contact with fuels. Normalized SKU: 34311UPC Code: 686226343116