Sika 648701 Adhesives & SealantsBPO Cream Hardener White 4oz Tube Resin RequiredBPO (benzoyl peroxide) is a peroxide used for curing amine accelerated polyester resins and fillers. It leads to rapid hardening and de-molding, even at low temperatures. Normalized SKU: 648701

Sika 606547 Adhesives & SealantsSikaBiresin® AP077 White Gallon BPO Hardener RequiredSikaBiresin® AP077 is a polyester filler and fairing compound that offers the user a smooth workable paste with a set fast cure to expedite those applications for repair or finish. It is easier to sand than conventional fillers and can be finished to a feather edge. This material can be easily applied with a squeegee, spatula, or flat tool, and once cured will accept virtually all types of coatings and decorative films.Features: Exceptional adhesion Very quick setting Minimal shrinkage Usage:SikaBiresin® AP077 can be used in the following applications: gel coat blister repair, fiberglass parts repair, and filling cloth imprint on FRP panels. This material has excellent adhesive and bond strength to fiberglass, SMC, FRP, epoxy, graphite, and Kevlar® composites as well as aluminum, wood, and other substrates.Advantages: Exceptional adhesion Very quick setting Minimal shrinkage High service temperature Excellent finishing and machinability Accept virtually all types of finishes Low moisture absorption for above or below waterline applications Normalized SKU: 606547

Sika 606126 Adhesives & SealantsSikaBiresin® AP014 White Gallon Can BPO Hardener RequiredThe brand SikaBiresin® represents specialized liquid resins based on polyurethane and epoxy. A part of this brand is dedicated to classic and advanced tooling and modeling applications. While other products are specialized in specific applications in the production industry. From special layers and resins for air and medical filters, even crystal-clear products for art and decorating are part of this broad-reaching product brand. Specialized resins for encapsulation of electric and electronic parts as well as composite resins for lightweight design and production complete the portfolio.Applications: Model and tool making Rapid prototyping External parts e.g. engine hoods Interior parts Lightweight wheels Benefits: Different resins available for different processes and requirements Highly experienced technical service support available for on-site systems implementation Resins and hardeners available in different container sizes Normalized SKU: 606126

Sika 609801 Adhesives & SealantsSikaBiresin® AP077 White Quart BPO Hardener RequiredSikaBiresin® AP077 is a polyester filler and fairing compound that offers the user a smooth workable paste with a set fast cure to expedite those applications for repair or finish. It is easier to sand than conventional fillers and can be finished to a feather edge. This material can be easily applied with a squeegee, spatula, or flat tool, and once cured will accept virtually all types of coatings and decorative films.Features: Exceptional adhesion Very quick setting Minimal shrinkage Usage:SikaBiresin® AP077 can be used in the following applications: gel coat blister repair, fiberglass parts repair, and filling cloth imprint on FRP panels. This material has excellent adhesive and bond strength to fiberglass, SMC, FRP, epoxy, graphite, and Kevlar® composites as well as aluminum, wood, and other substrates.Advantages: Exceptional adhesion Very quick setting Minimal shrinkage High service temperature Excellent finishing and machinability Accept virtually all types of finishes Low moisture absorption for above or below waterline applications Normalized SKU: 609801

3M Marine 14316 Adhesives & Sealants 4000UV Fast Cure Sealant, Black, 10 oz. Cartridge A one part sealant that cures to form a firm, rubbery waterproof seal. Its flexibility allows for the dissipation of stress caused by shock, vibration, swelling or shrinking. Use above or below the waterline. Superior UV resistance properties. Tack free in less than 2 hours, cures in 24 hours. Normalized SKU: 14316UPC Code: 076308143169

Sika 769 Adhesives & SealantsSikaflex® 295 UV - White - 10oz Tube with NozzleExterior sealant and direct glazing adhesive for organic glass in Marine applications. Sikaflex®-295 UV is a 1-component polyurethane adhesive of paste-like consistency that cures on exposure to atmospheric moisture. It is suitable for interior and exterior sealing applications and to bond organic glass in the Marine business. Sikaflex®-295 UV meets the requirements set out by the International Maritime Organization (IMO).  Features: Excellent application properties Resistant to aging and weathering Suitable for organic glasses Areas of ApplicationSikaflex®-295 UV has been specially developed for the marine industry, where it is used to bond and seal plastic glazing materials in boats and ships. Because of its excellent weatherability this product can also be used to seal joints in exposed areas. Suitable substrates are aluminum (bright or anodized), GRP (polyester resin), stainless steel, timber, 2-component coatings, and plastic glazing materials (PC, PMMA). Seek manufacturer’s advice and perform tests on original substrates before using Sikaflex®-295 UV on materials prone to stress cracking. This product is suitable for experienced professional users only. Tests with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.Product Benefits: Excellent application properties Resistant to aging and weathering Suitable for organic glasses Approved for the OEM market Wheelmark approved Surface Preparation:Surfaces must be clean, dry, and free from grease, oil, dust, and contaminants. Surface treatment depends on the specific nature of the substrates and is crucial for a long-lasting bond. Suggestions for surface preparation may be found on the current edition of the appropriate Sika® Pre-treatment Chart. Consider that these suggestions are based on experience and have in any case to be verified by tests on original substrates. Application:Sikaflex®-295 UV can be processed between 10 °C and 35 °C (climate and product) but changes in reactivity and application properties have to be considered. The optimum temperature for substrate and sealant is between 15 °C and 25 °C.Consider that the viscosity will increase at low temperatures. For easy application, condition the adhesive at ambient temperature prior to use. To ensure a uniform thickness of the bonding it is recommended to apply the adhesive in form of a triangular bead.Tooling & FinishingTooling and finishing must be carried out within the skin time of the product. It is recommended to use Sika® Tooling Agent N. Other finishing agents must be tested for suitability and compatibility prior to the use. RemovalUncured Sikaflex®-295 UV can be removed from tools and equipment with Sika® Remover-208 or another suitable solvent. Once cured, the material can only be removed mechanically. Hands and exposed skin have to be washed immediately using Sika® Cleaner-350H cleaning towels or a suitable industrial hand cleaner and water. Do not use solvents on the skin.OverpaintingSikaflex®-295 UV can be painted prior to and after the formation of the skin. If the painting process takes place after the sealant has built a skin, adhesion could be improved by treating the joint surface with Sika® Aktivator-100 or Sika® Aktivator-205 prior to the painting process. If the paint requires a baking process (> 80 °C), the best performance is achieved by allowing the sealant to fully cure first. All paints have to be tested by carrying preliminary trials under manufacturing conditions. The elasticity of paints is usually lower than that of sealants. This could lead to cracking of the paint in the joint area. Normalized SKU: 769UPC Code: 7612894009095

Sika 778 Adhesives & SealantsSikaflex® 295 UV - Black - 10oz Tube with NozzleExterior sealant and direct glazing adhesive for organic glass in Marine applications. Sikaflex®-295 UV is a 1-component polyurethane adhesive of paste-like consistency that cures on exposure to atmospheric moisture. It is suitable for interior and exterior sealing applications and to bond organic glass in the Marine business. Sikaflex®-295 UV meets the requirements set out by the International Maritime Organization (IMO).  Features: Excellent application properties Resistant to aging and weathering Suitable for organic glasses Areas of ApplicationSikaflex®-295 UV has been specially developed for the marine industry, where it is used to bond and seal plastic glazing materials in boats and ships. Because of its excellent weatherability this product can also be used to seal joints in exposed areas. Suitable substrates are aluminum (bright or anodized), GRP (polyester resin), stainless steel, timber, 2-component coatings, and plastic glazing materials (PC, PMMA). Seek manufacturer’s advice and perform tests on original substrates before using Sikaflex®-295 UV on materials prone to stress cracking. This product is suitable for experienced professional users only. Tests with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.Product Benefits: Excellent application properties Resistant to aging and weathering Suitable for organic glasses Approved for the OEM market Wheelmark approved Surface Preparation:Surfaces must be clean, dry, and free from grease, oil, dust, and contaminants. Surface treatment depends on the specific nature of the substrates and is crucial for a long-lasting bond. Suggestions for surface preparation may be found on the current edition of the appropriate Sika® Pre-treatment Chart. Consider that these suggestions are based on experience and have in any case to be verified by tests on original substrates. Application:Sikaflex®-295 UV can be processed between 10 °C and 35 °C (climate and product) but changes in reactivity and application properties have to be considered. The optimum temperature for substrate and sealant is between 15 °C and 25 °C.Consider that the viscosity will increase at low temperatures. For easy application, condition the adhesive at ambient temperature prior to use. To ensure a uniform thickness of the bonding it is recommended to apply the adhesive in form of a triangular bead.Tooling & FinishingTooling and finishing must be carried out within the skin time of the product. It is recommended to use Sika® Tooling Agent N. Other finishing agents must be tested for suitability and compatibility prior to the use. RemovalUncured Sikaflex®-295 UV can be removed from tools and equipment with Sika® Remover-208 or another suitable solvent. Once cured, the material can only be removed mechanically. Hands and exposed skin have to be washed immediately using Sika® Cleaner-350H cleaning towels or a suitable industrial hand cleaner and water. Do not use solvents on the skin.OverpaintingSikaflex®-295 UV can be painted prior to and after the formation of the skin. If the painting process takes place after the sealant has built a skin, adhesion could be improved by treating the joint surface with Sika® Aktivator-100 or Sika® Aktivator-205 prior to the painting process. If the paint requires a baking process (> 80 °C), the best performance is achieved by allowing the sealant to fully cure first. All paints have to be tested by carrying preliminary trials under manufacturing conditions. The elasticity of paints is usually lower than that of sealants. This could lead to cracking of the paint in the joint area. Normalized SKU: 778UPC Code: 7612894009170

Seachoice 96941 Adhesives & Sealants Silicone Sealant Clear 10.1 oz 100% Pure silicone - uncut General-purpose Permanently flexible Cures at room temperature Excellent weatherability Mold & mildew resistant-unaffected by chemicals, fuel or UV UL Recognition Not for use below waterline Normalized SKU: 96941UPC Code: 719249969411

Seachoice 96961 Adhesives & Sealants Silicone High-Performance White 2.8oz. 100% Pure silicone High-Performance construction silicone (used to adhere windows in skyscrapers) Superior adhesion on Gelcoat, metals & plastics Non-corrosive-unaffected by chemicals, fuel, or UV Good Tear Resistance Permanently flexible & waterproof Low odor UL Recognition Not for use below the waterline Size 2.8 oz. tube Color White Normalized SKU: 96961UPC Code: 719249969619

Seachoice 96931 Adhesives & Sealants Silicone Sealant Clear 2.8 oz 100% Pure silicone - uncut General-purpose Permanently flexible Cures at room temperature Excellent weatherability Mold & mildew resistant-unaffected by chemicals, fuel or UV UL Recognition Not for use below waterline Normalized SKU: 96931UPC Code: 719249969312

Loctite-Permatex 81158 Adhesives & Sealants Black Silicone Adhesive Sealant, 3 oz General-purpose, Black RTV indoor/outdoor sealant. Seals; bonds, repairs, mends, and secures glass, metal, plastics, fabric, vinyl, weather stripping, and vinyl tops. Protects and repairs electrical wiring. Waterproof and flexible. Temperature range -80° F to 450° F; resists oil, water, weather, vibration, and grease. Normalized SKU: 81158UPC Code: 686226811585

Loctite-Permatex 82190 Adhesives & SealantsPermatex Super Glue is designed to form faster, longer-lasting bonds and fill gaps to .004″. Super Glue 2g Normalized SKU: 82190UPC Code: 686226821904