00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Lee's Tackle Inc.
Lee Center Rigger Pole 15' Bright Silver/Black Spike #MX8715CR
$400.08
$499.34
Lee's Tackle Inc. MX8715CR Outriggers15' Bright Silver/Black Spike - Step Tube 1-3/8" - No SpeaderThe Center Rigger has proven to be an effective tool when trolling. It should be the highest outrigger when the others are deployed in the fishing position. Its line runs straight down the middle with its bait being the farthest back. The Center Rigger bait, more often than not, is the one struck after the other baits have streamed by.Features:
15'
Bright Silver/Black Spike
MX Step-Tube Style
No Spreader
Specifications:Construction = NONE Diameter (Inches) = NONE Finish = Silver Length (Feet) = 15' Mounting Style = NONENormalized SKU: MX8715CRUPC Code: 096811871540
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Lee's Tackle Inc.
Lee Rod Holder Heavy Duty 0-Degree SS #RH5332V
$160.28
$203.56
Lee's Tackle Inc. RH5332V Rod HoldersRod Holder - Heavy Duty - 0° - Stainless SteelThe choice of boat manufacturers and consumers alike, Lee’s has been the Rod Holder Specialist for over 50 years. Lee manufacturers of over 46 different models of flush mounted rod holders. Available in two sizes, Medium (2 in O.D.) and Heavy (2 1/4 in. O.D.) three different angles (0, 15 & 30 degree) in Stainless Steel. All of our Rod Holders, are polished by hand then electropolished Lee’s has the rod holder to suit any task. Specifications:Angle = NONE Construction = NONE Diameter (Inches) = NONE Finish = NONE Length (Inches) = NONE Mounting Style = NONENormalized SKU: RH5332VUPC Code: 096811530058
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Lee's Tackle Inc.
Lee Rod Holder Medium 0-Degree SS #RH5327V
$138.49
$171.92
Lee's Tackle Inc. RH5327V Rod HoldersRod Holder - Medium - 0° - Stainless SteelThe choice of boat manufacturers and consumers alike, Lee’s has been the Rod Holder Specialist for over 50 years. Lee manufacturers of over 46 different models of flush mounted rod holders. Available in two sizes, Medium (2 in O.D.) and Heavy (2 1/4 in. O.D.) three different angles (0, 15 & 30 degree) in Stainless Steel. All of our Rod Holders, are polished by hand then electropolished Lee’s has the rod holder to suit any task. Normalized SKU: RH5327VUPC Code: 096811530027
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Lee's Tackle Inc.
Lee's 0-Degree SS Flush Mount Swivel Rod Holder Extra Long #RH577XL
$215.16
$273.27
Lee's Tackle Inc. RH577XL Rod HoldersSwivel Base Rod HolderRH577XLVertical 0° Extra Long TubeWithout a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin. Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a 1/2 inch stainless steel lock nut at the bottom of the rod holder. Specifications:Finish = Polished Length (Inches) = NONE Mounting Style = Flush Angle = 0 Degrees Construction = Stainless Steel Diameter (Inches) = 2.25" O.D.LEE'S 0 DEGREE SS FLUSH MOUNT SWIVEL ROD HOLDER EXTRA LONGNormalized SKU: RH577XLUPC Code: 096811517714
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Lee's Tackle Inc.
Lee's 0-Degree SS Flush-Mount Swivel Base Rod Holder 2" x 9" #RH5367V
$168.18
$213.60
Lee's Tackle Inc. RH5367V Rod HoldersSwivel Base Flush Mount Rod HolderPart #: RH-5367SS Medium 0 Degree Stainless SteelWithout a doubt, our swivel base rod holder is the "Ultimate Rod Holder" for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin. Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tip's roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a half inch stainless steel lock nut at the bottom of the rod holder. Specifications:Angle = 0 Degrees Construction = Stainless Steel Diameter (Inches) = 2" Finish = NONE Length (Inches) = 9" Mounting Style = FlushNormalized SKU: RH5367VUPC Code: 096811530720
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Lee's Tackle Inc.
Lee's 0-Degree SS HD Bar-Pin Rod Holder 2" OD #RH527VS/XS
$133.39
$165.58
Lee's Tackle Inc. RH527VS/XS Rod HoldersFlush Mount Rod HolderHeavy Duty Bar PinAll Stainless SteelRH-527VS/XS Medium 0°The choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years. Specifications:Finish = Polished Length (Inches) = 8.5" Mounting Style = Flush Angle = 0 Degrees Construction = Stainless Steel Diameter (Inches) = 2.0"LEE'S 0 DEGREE SS FLUSH MOUNT BAR PIN ROD HOLDER MEDIUMNormalized SKU: RH527VS/XSUPC Code: 096811512719
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Lee's Tackle Inc.
Lee's 0-Degree SS Steel Flush-Mount Rod Holder 2" OD #RH527VS
$120.83
$149.99
Lee's Tackle Inc. RH527VS Rod HoldersFlush Mount Rod HolderRH-527VS Medium 0° Stainless SteelThe choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years. Specifications:Finish = Polished Length (Inches) = 8.6" Mounting Style = Flush Angle = 0 Degrees Construction = Stainless Steel Diameter (Inches) = 2.0"LEE'S 0 DEGREE SS FLUSH MOUNT ROD HOLDER MEDIUM 2" ODNormalized SKU: RH527VSUPC Code: 096811512702
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Lee's Tackle Inc.
Lee's 0-Degree SS Swivel Base Flush-Mount Rod Holder Medium #RH5167V
$162.47
$206.35
Lee's Tackle Inc. RH5167V Rod HoldersRH5167VVertical 0° Short TubeMedium size Short Swivel Base for Stand-Up Rods with Curved Butts. Has 2" OD x 6-1/2" long tube.Without a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin. Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a 1/2 inch stainless steel lock nut at the bottom of the rod holder. Specifications:Finish = Polished Length (Inches) = 6.5" Mounting Style = Flush Angle = 0 Degrees Construction = Stainless Steel Diameter (Inches) = 2" O.D.LEE'S 0 DEGREE SS FLUSH MOUNT SWIVEL BASE ROD HOLDER 2" ODNormalized SKU: RH5167VUPC Code: 096811516526
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Lee's Tackle Inc.
Lee's 0-Degree Stainless Flush-Mount Rod Holder 2.25" OD #RH532VS
$144.07
$178.85
Lee's Tackle Inc. RH532VS Rod HoldersFlush Mount Rod HolderRH-532VS Large 0° Stainless SteelThe choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years. Specifications:Finish = Polished Length (Inches) = 10.6" Mounting Style = Flush Angle = 0 Degrees Construction = Stainless Steel Diameter (Inches) = 2.25"LEE'S 0 DEGREE SS FLUSH MOUNT ROD HOLDER HEAVY DUTY 2.25" ODNormalized SKU: RH532VSUPC Code: 096811513204
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Lee's Tackle Inc.
Lee's 0-Degree Stainless HD Bar-Pin Rod Holder 2.25" OD #RH532VS/XS
$158.96
$201.89
Lee's Tackle Inc. RH532VS/XS Rod HoldersFlush Mount Rod HolderHeavy Duty Bar PinAll Stainless SteelRH-532VS/XS Large 0°The choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years. Specifications:Finish = Polished Length (Inches) = 10.6" Mounting Style = Flush Angle = 0 Degrees Construction = Stainless Steel Diameter (Inches) = 2.25"LEE'S 0 DEGREE SS FLUSH MOUNT BAR PIN ROD HOLDER HEAVY DUTYNormalized SKU: RH532VS/XSUPC Code: 096811513211
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Lee's Tackle Inc.
Lee's 0-Degree Stainless Swivel Base Flush-Mount Rod Holder #RH577V
$195.84
$248.73
Lee's Tackle Inc. RH577V Rod HoldersSwivel Base Rod HolderRH577VVertical 0°Without a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin. Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a 1/2 inch stainless steel lock nut at the bottom of the rod holder. Specifications:Finish = Polished Length (Inches) = NONE Mounting Style = Flush Angle = 0 Degrees Construction = Stainless Steel Diameter (Inches) = 2.25"LEE'S 0 DEGREE SS FLUSH MOUNT SWIVEL BASE ROD HOLDER 2.25"Normalized SKU: RH577VUPC Code: 096811517707
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Lee's Tackle Inc.
Lee's 1.75" Flush-Mount Skiff Series Outrigger Holder #OH2016F
$881.73
$1,067.72
Lee's Tackle Inc. OH2016F OutriggersGunnel Mount Outrigger HoldersOH2016SSize: 1.75"Dimensions: 3 1/2 x 6Attractive, Strong, and Bullet Proof all describe our Gunnel Mount Outrigger Holders. One piece flange construction. Plate, Tube and Bar-Pin are all cast simultaneously for the ultimate in strength. Curved Tube has Solid End Plug with Deep Slots to assure long service and reliability. Tubes are made with Port and Starboard slot orientation to optimize fishing angle. Flange mounts flush with gunnel. When tube is removed, gunnel is unobstructed. Unit has three positions, straight up Running, angled out Trolling and straight back for Bridge Clearing. Originally designed by Lee's in the 50's and copied by nearly all our competition. However, no one rivals our durability, fit & finish. Chrome on Brass construction.WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:Finish = Chrome Mounting Style = Flush Length (Feet) = NONE Construction = Brass Diameter (Inches) = 1.75"LEE'S FLUSH MOUNT 1 3/4" SKIFF OUTRIGGER HOLDER Normalized SKU: OH2016FUPC Code: 096811201606
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Lee's Tackle Inc.
Lee's 1.75" Side Mount Skiff Series Outrigger Holder #OH2018S
$859.69
$1,041.03
Lee's Tackle Inc. OH2018S OutriggersSide Mount Outrigger HoldersOH2018SSize: 1.75"Dimensions: 4 1/2 x 7 1/2Side Mount Bracket utilizes same curved tube as Gunnel Mount. One piece Bracket construction. Tube, Feet and Bar-Pin are all cast simultaneously for the ultimate in strength. Unit provides same three positions as Flush Mount. Same rugged Chrome on Brass Cosntruction.WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:Finish = Chrome Mounting Style = Side Length (Feet) = NONE Construction = Brass Diameter (Inches) = 1.75"LEE'S SIDE MOUNT 1 3/4" SKIFF OUTRIGGER HOLDERNormalized SKU: OH2018SUPC Code: 096811201804
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Lee's Tackle Inc.
Lee's 12' MKII Bright Silver Pole Black Spike 1-3/8" OD #AO8712CR
$339.08
$430.65
Lee's Tackle Inc. AO8712CR Outriggers12' MKII Bright Silver Pole w/Black Spike1 3/8" diameter Normalized SKU: AO8712CRUPC Code: 096811871205
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Lee's Tackle Inc.
Lee's 13' Bright Silver Pole Black Spike Step Tube 1-3/8" #MX8713CR
$455.78
$568.87
Lee's Tackle Inc. MX8713CR Fishing Accessories13' Bright Silver/Black Spike - Step Tube 1-3/8" - No SpreaderThe Center Rigger has proven to be an effective tool when trolling. It should be the highest outrigger when the others are deployed in the fishing position. Its line runs straight down the middle with its bait being the farthest back. The Center Rigger bait, more often than not, is the one struck after the other baits have streamed by.Features:
13'
Bright Silver/Black Spike
MX Step-tube style
No spreader
Specifications:Construction = NONE Diameter (Inches) = NONE Finish = Silver Length (Feet) = 13 Mounting Style = NONENormalized SKU: MX8713CRUPC Code: 096811871571
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Lee's Tackle Inc.
Lee's 15' MKII Bright Silver Pole Black Spike 1-3/8" OD #AO8715CR-1
$389.94
$486.70
Lee's Tackle Inc. AO8715CR-1 Outriggers16' MKII Bright Silver Pole with Black Spike 1-3/8" OD - for Center Riggers16' bright silver pole with black spike 1-3/8" OD for center riggers. Normalized SKU: AO8715CR1UPC Code: 096811871502
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Lee's Tackle Inc.
Lee's 15-Degree SS Flush Mount Swivel Rod Holder Extra Long #RH579XL
$215.16
$273.27
Lee's Tackle Inc. RH579XL Rod HoldersSwivel Base Rod HoldersRH579XLHalf Angle 15° Extra Long TubeStainless Steel Flush Mount w/ Swivel BaseWithout a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin. Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a 1/2 inch stainless steel lock nut at the bottom of the rod holder. Specifications:Finish = Polished Length (Inches) = NONE Mounting Style = Flush Angle = 15 Degrees Construction = Stainless Steel Diameter (Inches) = 2.25"LEE'S 15 DEGREE SS FLUSH MOUNT SWIVEL ROD HOLDER EXTRA LONGNormalized SKU: RH579XLUPC Code: 096811517912
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Lee's Tackle Inc.
Lee's 15-Degree SS Flush-Mount Swivel Base Rod Holder 2" x 9" #RH5369H
$168.18
$213.60
Lee's Tackle Inc. RH5369H Rod HoldersSwivel Base Flush Mount Rod HolderMedium, 15 Degree, Stainless SteelWithout a doubt, our swivel base rod holder is the "Ultimate Rod Holder" for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin. Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tip's roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a half inch stainless steel lock nut at the bottom of the rod holder. Specifications:Angle = 15 Degrees Construction = Stainless Steel Diameter (Inches) = 2 Finish = NONE Length (Inches) = 9 Mounting Style = FlushNormalized SKU: RH5369HUPC Code: 096811530737
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Lee's Tackle Inc.
Lee's 15-Degree SS Swivel Base Flush-Mount Rod Holder Medium #RH5169H
$162.47
$206.35
Lee's Tackle Inc. RH5169H Rod HoldersSwivel Base Rod HoldersRH5169Half Angle 15° Short TubeMedium size Short Swivel Base for Stand-Up Rods with Curved Butts. Has 2" OD x 6-1/2" long tube.Without a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin. Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a 1/2 inch stainless steel lock nut at the bottom of the rod holder. Specifications:Finish = Polished Length (Inches) = 6.5" Mounting Style = Flush Angle = 15 Degrees Construction = Stainless Steel Diameter (Inches) = 2" O.D.LEE'S 15 DEGREE SS FLUSH MOUNT SWIVEL BASE ROD HOLDER 2" ODNormalized SKU: RH5169HUPC Code: 096811516533
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Lee's Tackle Inc.
Lee's 15-Degree Stainless Flush-Mount Rod Holder 2" OD #RH529HS
$120.83
$149.99
Lee's Tackle Inc. RH529HS Rod HoldersFlush Mount Rod HolderRH-529HS Medium 15° Stainless SteelThe choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years. Specifications:Finish = Chrome Length (Inches) = 8.5" Mounting Style = Flush Angle = 15 Degrees Construction = Stainless Steel Diameter (Inches) = 2.0"LEE'S 15 DEGREE SS FLUSH MOUNT ROD HOLDER MEDIUM 2" ODNormalized SKU: RH529HSUPC Code: 096811512900
Frequently Asked Questions
First Choice Marine is an online marine retailer carrying a diverse line of marine parts and accessories and related items from industry-respected and demanded manufacturers and suppliers. Through our diverse distributor network, we are able to access over 150,000 items, including our current site inventory, new products being added, and special order items. If you need it on your boat... we are your one-stop shop!
Yes, we offer FREE Shipping on most orders over $149 to US-48*.
Each product displays a shipping status message, just above the item price. Below is the meaning for each of these codes.
- Qualifies for Free Shipping: This item qualifies for free shipping when the order is $149+
- Qualifies for Free Ground Shipping: This item qualifies for free ground shipping when the order is $149+.
- Oversized - Not Qualified for Free Shipping: This item is too large/heavy to qualify for free shipping
- Hazardous Item - Not Qualified for Free Shipping: This item is hazardous and does not qualify for free shipping
- Truck Freight - Not Qualified for Free Shipping: This item has to be shipped via truck freight. Please contact us for a quote
- In-Store Pickup Only: This item can only be picked up in our Grain Valley, MO retail store
Below the price of the item, on the product page, there is a message indicating the availability of the product.
The quantity on hand is updated as inventory events happen and matches what we have available. If you have urgent needs and we are close to what you need, contact us, and we can confirm stock.
We offer a hassle-free return policy. If you're not completely satisfied with your purchase, you can return it within 30 days for a full refund or exchange.
If you need to return an item, please follow the guidelines here so we can process a prompt refund and assist you in finding the correct item.
Free Shipping
On most orders $149+ to the continental 48 US states.Secure Shopping
Fast, secure checkout with a variety of payment methods.Shop with confidence
25+ years serving the marine industry.Support center
Need help? Contact us via live chat, phone, or email.