00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Cook Manufacturing
Cook Manufacturing Power Tilt PT130 with Gauge #13001
$1,512.25
$1,754.21
Cook Manufacturing 13001 Tilt & Trim
Rated for 130 hp and smaller motors, the 13002 will trim the motor 20° and a total of 65° of trim and tilt. It is actuated with a totally waterproof marine electric hydraulic system that is rated over 7800 lbs. of thrust! This hydraulic system is made of 100% non-ferrous materials which makes it more impervious to saltwater and freshwater than ball screw, electro-mechanical systems equipped on other brands. In fact, it is over twice as powerful as the ball screw electro mechanical actuator. The CMC hydraulic system is completely sealed and submersible and runs without worry of water damage. It is constructed of 1/2" 6061 T6 alloy aluminum extrusions and fastened with stainless steel fasteners for maximum strength and durability. No welds or castings to break. Carry's a 5-year structure warranty. Unit incorporates a 6" setback which enhances boat stability and will put the prop in "cleaner" water, thus giving the prop a better "bite" and eliminating prop slippage. It can also increase top-end speed and fuel efficiency. It is great for pontoon boats, too! Since access to the motor on most pontoon boats is very difficult, the 13002 can make it very convenient. It is back-saving, and prop-saving, simply by flicking a switch when approaching shallow water. Note: clamp-on motors need an adapter (13022).Outboard: Trim Assembly
Normalized SKU: 13001UPC Code: 739697130010
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Cook Manufacturing
Cook Manufacturing Power-Lift Pl-65 with Gauge #65001
$1,449.39
$1,681.29
Cook Manufacturing 65001 Motor BracketsThis unique outboard motor hydraulic lifting device works independently of your power tilt and trim to allow the boat-motor-prop combination to work at its maximum efficiency. The CMC hydraulic Power-Lift gives you the ability to adjust your motor down, while underway at full speed, for better out-of-hole shots or up for more top end speed and more prop clearance in shallow water. Ideal for ski, bass or work boats. With the flick of a switch, the CMC Power-Lift makes it easy to find the optimum height for any condition. The Power-Lift is designed to fit V-6 and smaller outboard motors without drilling holes or making modifications in the boat or motor. Provides 5" of travel and choose between 5-1/2 and 10 inch setback. No short cuts are taken at CMC so you can be sure you will get the best transom jack for your money. Computer aided design and precision machining of the Power-Lift is done at our facility. The Power-Lift has no welded parts or aluminum castings to break. The CMC Power-Lift is constructed of 1/2 inch 6061 T6 aluminum alloy extrusions and fastened with stainless steel fasteners for maximum strength and durability. The Power-Lift utilizes a marine hydraulic power unit operated by 12 volt DC and is completely waterproof. The motor bracket moves up and down on a transom bracket by use of rollers machined from aluminum-bronze alloy. These rollers are highly impact resistant, corrosive resistant and have a high load carrying capacity. Thrust is eliminated by the stainless steel pin through this roller with a space age self-lubricating non-metallic material (G.S.M. nylatron) used for thrust guides on either side of the rollers.Cook Manufacturing Power-Lift Pl-65 with Gauge 65001Normalized SKU: 65001UPC Code: 739697650013
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Cook Manufacturing
Cook Manufacturing Power-Lift Pl-65-10 with Gauge #61001
$1,605.28
$1,862.12
Cook Manufacturing 61001 Motor BracketsThis unique outboard motor hydraulic lifting device works independently of your power tilt and trim to allow the boat-motor-prop combination to work at its maximum efficiency. The CMC hydraulic Power-Lift gives you the ability to adjust your motor down, while underway at full speed, for better out-of-hole shots or up for more top end speed and more prop clearance in shallow water. Ideal for ski, bass or work boats. With the flick of a switch, the CMC Power-Lift makes it easy to find the optimum height for any condition. The Power-Lift is designed to fit V-6 and smaller outboard motors without drilling holes or making modifications in the boat or motor. Provides 5" of travel and choose between 5-1/2 and 10 inch setback. No short cuts are taken at CMC so you can be sure you will get the best transom jack for your money. Computer aided design and precision machining of the Power-Lift is done at our facility. The Power-Lift has no welded parts or aluminum castings to break. The CMC Power-Lift is constructed of 1/2 inch 6061 T6 aluminum alloy extrusions and fastened with stainless steel fasteners for maximum strength and durability. The Power-Lift utilizes a marine hydraulic power unit operated by 12 volt DC and is completely waterproof. The motor bracket moves up and down on a transom bracket by use of rollers machined from aluminum-bronze alloy. These rollers are highly impact resistant, corrosive resistant and have a high load carrying capacity. Thrust is eliminated by the stainless steel pin through this roller with a space age self-lubricating non-metallic material (G.S.M. nylatron) used for thrust guides on either side of the rollers.Cook Manufacturing Power-Lift Pl-65-10 with Gauge 61001Normalized SKU: 61001UPC Code: 739697610017
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Cook Manufacturing
Cook Manufacturing PT-35 Power Tilt/Trim #52100
$852.57
$1,032.41
Cook Manufacturing 52100 Tilt & Trim
Rated for 35 HP and smaller motors. 5-1/2" setback to enhance boat stability and performance. 84° of trim and tilt. 1/4" 6061 T6 extruded aluminum construction with stainless steel fasteners. Electric hydraulic actuator rated at 7,853 lbs of thrust. Accommodates clamp-on or bolt-on motors without the need for an adapter. Weighs only 24 pounds.Outboard: Trim Assembly
Rated for 35 hp power and smaller motors
5-1/2" Set Back to Enhance Boat Stability and Performance
1/4" 6061 T6 Extruded Aluminum Construction with Stainless Steel Fasteners
Accommodates Clamp-on or Bolt-on Motors without the need for an Adapter
Mounting bold not included
Weighs Only 24 Pounds
Note: The inside dimension of the motor mounting area of the PT-35 is 11 inches. Before ordering, please make sure that the maximum width of the clamp mounting feet and/or mounting bolts of the motor that must fit into this area does not exceed this 11-inch limit. Refer to the transom view drawings. Mounting bolts are not included with the PT-35.Normalized SKU: 52100UPC Code: 739697521009
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Cook Manufacturing
Cook Manufacturing Rail Starboard #52040
$37.94
$45.52
Cook Manufacturing 52040 Railing & FittingsCook Manufacturing Rail Starboard #52040Normalized SKU: 52040
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Cook Manufacturing
Cook Manufacturing Relay #7122
$36.66
$43.75
Cook Manufacturing 7122 Motor PlatesThe CMC Power-Tilt is constructed of 1/2" 6061 T6 alloy aluminum extrusions and fastened with stainless steel fasteners for maximum strength and durability. Features include: 6" setback for increased boat stability, increases top end speed and fuel efficiency, equipped with proven 12VDC hydraulic motor and pump assembly for more power and reliability, and fits most 130 H.P. motors and smaller with a standard BIA bolt pattern without drilling holes, Has a 5 year warranty and 1 year hydraulic system warranty. Unit is available with trim gauge, and comes complete with stainless steel motor mounting hardware, wire assembly and switch. A convenient adapter kit is also available for smaller motors that are mounted with transom clamps. Polished aluminum.Normalized SKU: 7122UPC Code: 739697071221
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Cook Manufacturing
Cook Manufacturing Relay for Powerlift 80a #7439
$25.85
$30.86
Cook Manufacturing 7439 Motor BracketsCook Manufacturing Relay for Powerlift 80a #7439Normalized SKU: 7439
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Cook Manufacturing
Cook Manufacturing Static Set-Back 2.5" #65213
$166.41
$211.36
Cook Manufacturing 65213 Motor PlatesThe 2-1/2 INCH STATIC SET BACK PLATE has 1 1/2 inches of adjustment at the transom. It is most commonly used in conjunction with the manual or hydraulic Power-Lift to give a total of 8 inches of set back. Cook Manufacturing Static Set-Back 2.5" 65213Normalized SKU: 65213UPC Code: 739697652130
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Cook Manufacturing
Cook Manufacturing Toggle #7123
$11.76
$14.04
Cook Manufacturing 7123 Motor PlatesCook Manufacturing Toggle #7123Normalized SKU: 7123
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Cook Manufacturing
Cook Manufacturing Transom Clamp Motor Adapter #13022
$147.37
$187.17
Cook Manufacturing 13022 Motor Brackets
For the installation of motors mounted with transom clamps, an adapter kit is available. This adapter kit is made for quick and easy installation of these types of motors.
Works with CMC PT-130 Tilt & Trim, ATLAS THT-130C Tilt & Trim (our larger trim units sized for standard outboard engine mounting with BIA hole pattern).
Use with the PT-130 / THT-130C for installation of smaller motors mounted with transom clamps. This adapter kit is made for quick and easy installation of these transom clamp type of motors.
If your motor has clamps that tighten inside of the splash well, you will need to purchase this transom clamp adapter, if you want it to fit on Tilt & Trim units or Jack Plates designed for standard, full-size motor mounting.
Some motors are too big for the smaller Tilt & Trims or jack plates, but they need an adapter to fit on larger plates, these are the adapter plates.
Normalized SKU: 13022UPC Code: 739697130225
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Cook Manufacturing
Cook Manufacturing Transom Jack ML-65-10" #61012
$856.46
$1,037.12
Cook Manufacturing 61012 Motor BracketsMade of 6061 T6 extruded aluminum alloy and fastened with stainless steel fasteners. It utilizes an all thread stainless steel screw centrally located for uniform lift and positive alignment. The motor bracket moves up and down on the transom bracket by use of rollers matched from aluminum-bronze alloy (same as hydraulic CMC Power-Lift). There is 5" of verticle adjustment, with a choice of 5-1/2" or 10" set back from transom. Designed to fit any standard motor up thru V-6, 300HP without drilling holes or making modifications. The Power-Lift provides the added convenience of adjusting from the top or the bottom.Cook Manufacturing Transom Jack ML-65-10" 61012Normalized SKU: 61012UPC Code: 739697610123
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Cook Manufacturing
Cook Manufacturing Transom Rail Port Side #52030
$37.94
$45.52
Cook Manufacturing 52030 Railing & FittingsCook Manufacturing Transom Rail Port Side #52030Normalized SKU: 52030
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Cook Manufacturing
Cook Manufacturing Wire Harness and Relays #7014G
$172.02
$218.47
Cook Manufacturing 7014G Motor PlatesCook Manufacturing Wire Harness and Relays #7014GNormalized SKU: 7014GUPC Code: 739697070149
Frequently Asked Questions
First Choice Marine is an online marine retailer carrying a diverse line of marine parts and accessories and related items from industry-respected and demanded manufacturers and suppliers. Through our diverse distributor network, we are able to access over 150,000 items, including our current site inventory, new products being added, and special order items. If you need it on your boat... we are your one-stop shop!
Yes, we offer FREE Shipping on most orders over $149 to US-48*.
Each product displays a shipping status message, just above the item price. Below is the meaning for each of these codes.
- Qualifies for Free Shipping: This item qualifies for free shipping when the order is $149+
- Qualifies for Free Ground Shipping: This item qualifies for free ground shipping when the order is $149+.
- Oversized - Not Qualified for Free Shipping: This item is too large/heavy to qualify for free shipping
- Hazardous Item - Not Qualified for Free Shipping: This item is hazardous and does not qualify for free shipping
- Truck Freight - Not Qualified for Free Shipping: This item has to be shipped via truck freight. Please contact us for a quote
- In-Store Pickup Only: This item can only be picked up in our Grain Valley, MO retail store
Below the price of the item, on the product page, there is a message indicating the availability of the product.
The quantity on hand is updated as inventory events happen and matches what we have available. If you have urgent needs and we are close to what you need, contact us, and we can confirm stock.
We offer a hassle-free return policy. If you're not completely satisfied with your purchase, you can return it within 30 days for a full refund or exchange.
If you need to return an item, please follow the guidelines here so we can process a prompt refund and assist you in finding the correct item.
Free Shipping
On most orders $149+ to the continental 48 US states.Secure Shopping
Fast, secure checkout with a variety of payment methods.Shop with confidence
25+ years serving the marine industry.Support center
Need help? Contact us via live chat, phone, or email.