POWERHOUSE ICE EATER 3/4 HP 230V W/ 25' CORD
Manufacturer: Ice Eater
Part#: P750-25-230V
Free Shipping on this item*
Shipping Estimator:Country:
State/Province:
Zip:
Shipping Estimate:
27Regular Price: $707.99
On Sale For: $515.02
You Save $192.97
3-7 Days
- 3/4 H.P. energy efficient high quality motor with 36 pounds thrust
- 2.5 amps, 230 volt, one phase, 60/50 cycle
- 25 foot quick change power cord
- Two 25 foot x 3/8 hollow braided mooring lines with shackles
- Dimensions of shipping box 14 1/2 x 14 1/2 x 16 1/8
- Weight 45 pounds
- Motor housing is constructed of 16 gauge 304 stainless steel and bronze endbell for corrosion free operation in fresh or salt water; Motor exceeds NEMA specifications and is UL and CSA compliant, and C.E. certified
- Motor shaft is 316 stainless steel, the best material for salt water application
- Permanent split capacitor ensures quick high torque and smooth operation, while producing the highest efficiency of a single phase induction motor; Motor and capacitor are matched for ultimate performance
- Internal, heavy duty, hard faced mechanical seal with stainless components immersed in dielectric lubricating fluid; Additional double lip shaft seal for extra protection
- Stator motor windings have double impregnation of baked insulating varnish
- Two heavy duty ball bearings provide support for the rotor while being cooled with dielectric type oil
- Sacrificial custom designed zinc is provided for conditions where electrolysis may be present
- Propeller is custom designed for maximum thrust and performance; Propeller screws on shaft for easy removal and replacement
- Twenty-five feet of 16/3 water and oil resistant cord with three prong molded plug is standard; Additional length cord available: 50 and 100 feet
- Heavy duty PVC custom brackets that attach motor to shroud; All stainless bolts and locking aircraft nuts are used
- Performance certified tested at our facility for proper output and leaks before shipment
- Best three-year limited warranty in the marketplace
- Comes complete, just open the box, remove and install
- Optional thermostat custom design turns Ice Eater on when needed. Ideal for unattended application
POWERHOUSE 90000 ZINC REPLACEMENT ZINCREPLACEMENT ZINCIce Eater custom designed zinc fits over shaft of motor. Prevents electrolysis of Ice Eater components.... learn more
Available
22Regular Price: $20.99
On Sale For: $16.45
You Save $4.54
On Sale For: $16.45
You Save $4.54
POWERHOUSE THERMOSTAT SALT OR FRESH ADJUSTABLE TEMPICE EATER THERMOSTATNew Adjustable Thermostat. Temperature range from 30 degrees Fahrenheit to 110 degrees Fahrenheit. For use in both salt water and fresh water. (Replaces models FT2535 & FT3040) ... learn more
Available
24Regular Price: $120.99
On Sale For: $91.82
You Save $29.17
On Sale For: $91.82
You Save $29.17
POWERHOUSE SCREEN KIT SCA100A FITS P750 and P1000SCREEN ACCESSORY KITHelps prevent debris damage. Can be used on bottom or top or both as needed by area conditions.Works with P750 & P1000 ... learn more
Available
22Regular Price: $43.99
On Sale For: $34.27
You Save $9.72
On Sale For: $34.27
You Save $9.72
POWERHOUSE 80000 PROPELLER REPLACEMENT FOR ALLSPARE PROPELLERCustom designed propeller molded out of nylon for strength. Propeller screws on motor shaft.Works with all Models... learn more
Available
21Regular Price: $29.99
On Sale For: $23.59
You Save $6.40
On Sale For: $23.59
You Save $6.40
The Ice Eater is designed to prevent ice from forming around boats, marinas, docks, and piers as well as effectively melting existing ice by breaking the surface with a continuous current of warmer bottom water.
Ice Eater's propeller draws up warmer subsurface water and deflects it to the surface creating a constant circulation of warmer water that prevents ice formation. Ice Eater will melt existing ice. Unlike other de-icing units, Ice Eater requires no additional hardware in order to obtain the desired de-icing patern. Ice Eater is shipped complete with suspension lines. It can be taken out of the box, hung in place and plugged in. Ice Eater may be hung from a pier or boat. Two to three feet is the average operating depth.
Ice Eater's propeller draws up warmer subsurface water and deflects it to the surface creating a constant circulation of warmer water that prevents ice formation. Ice Eater will melt existing ice. Unlike other de-icing units, Ice Eater requires no additional hardware in order to obtain the desired de-icing patern. Ice Eater is shipped complete with suspension lines. It can be taken out of the box, hung in place and plugged in. Ice Eater may be hung from a pier or boat. Two to three feet is the average operating depth.
