(Mouse over to zoom - click to enlarge)
Jabsco Impeller Kit Neoprene #920-0001-P
Part Number: 920-0001-P
Share, print or email this page.
(click the plus for more options)
Regular Price: $46.99
On Sale For: $28.56
ITEM IS AVAILABLE
Jabsco IMPELLER KIT NEOPRENE #920-0001-PImpeller Kit - 8 Blade - Neoprene - 2-9/16" Diameter x 2" W, 5/8" Shaft
- Material: Neoprene
- Drive Type: Spline Drive
- Number of Blades: 8
- Dimensions: Diameter: 2-9/16" , Shaft Width: 2" , Shaft Diameter: 5/8"
- Insert Material: Brass
Jabsco flexible impellers can be fitted to most makes and models of bronze flexible impeller engine cooling, bilge, transfer and general purpose pumps.
Jabsco flexible impellers are subjected to rigorous quality processes to ensure reliable, efficient and long lasting performance.Replace all impellers
at least once every year, or sooner, depending on the engine duty. When the installation is correct an impeller may last for several years, but it is always advisable to stick to a schedule of preventative, rather than corrective, maintenance.Replacing impellers is easy.
By removing the end cover screws, it is possible to remove the impeller by using either a Jabsco Impeller Removal Tool, or channel lock pliers, to grip the hub of the impeller. Don?t use screwdrivers as they may damage the face of the pump body, causing leaks, and they can be dangerous in confined spaces.Always carry spare impellers on board in case of emergency.
The impeller is one of the most vital components of the engine cooling system and should always be treated as such. Always grease new impellers.
Firstly, it makes it easier to install the impeller into the pump bore, and secondly it gives added protection to the impeller during initial prime. After replacing the gasket and end cover the pump is ready to use.
Product Rating: (0.00) # of Ratings: 0 Click Here to rate this product|
There are no comments for this product. CLICK HERE to be the first one to share your opinion!
Xylem Inc. - Jabsco & Rule warrant that at the time of shipment the product manufactured by Xylem and sold hereunder (“the product”) shall be in conformity with applicable written specifications and descriptions and will be free from defects in material and workmanship for a period of 1 year or period stated on the product packaging. The warranty will not extend to a product which becomes defective resulting from damage in the course of transportation or by storage operation use or maintenance in an environment not conforming to the instructions or specifications of Xylem or if the product is altered or modified in any way.
Xylem's sole liability for breach of this warranty will be (at its option) to repair or replace the defective product. Warranty is only valid with proof of purchase from an authorized Xylem dealer.
Please note that the warranty on the product is with the place of purchase. For further information on Xylem warranties or to make a warranty claim
please click here (if purchased from First Choice Marine) or visit their website at www.xylemflowcontrol.com
This warranty does not affect your statutory rights. This warranty statement is not definitive and will be in addition to our standard terms and conditions.
Jabsco is a worldwide leading manufacturer of products for the leisure marine market, including water systems, engine cooling pumps, searchlights and marine waste systems. Anywhere a pump is needed aboard a pleasure-boat or small work-boat, for engine cooling, bilge pumping, fresh or waste water handling, Jabsco world wide will supply a top-quality product.