Mallory Marine Products 10w40 Marine 4-Stoke - Gallon 9-82351

Mallory Marine FC-W 4-Stroke Marine Lubricants are the highest quality petroleum engine lubricants available, and are formulated specifically for the severe demands of the marine environment.

Mallory Marine FC-W 4-Stroke Lubricants are blended utilizing advanced additive technology for anti-wear characteristics combined with the industry's highest FC-W standards for anti-corrosion and thermal stability. Mallory Marine 4-Strokel Lubricants extend the life of marine engines by reducing friction, heat, and wear.

Mallory Marine is so confident in our ability to increase performance and extend engine life thru its anti-wear additives that when a case of Mallory Marine FC-W 4-Stroke Lubricant and an appropriate Mallory Marine Oil Filter is purchased and used exclusively with a new 4-cycle outboard, sterndrive or inboard engine, Mallory Marine will warrant against a lubricant failure for Double the engine manufacturers warranty period on critical internal engine parts to a maximum of six years. Not only is your engine protected from wear, but you are protected from potential costly repairs caused from lubricant failure. See our FC-W Oil Warranty in the back of the catalog for complete details.

Mallory Marine High Performance FC-W SAE 10W-40 & 20W-50 4-Stroke Engine Oils

Formulated for Superior Performance and Corrosion Protection in 4-Stroke Outboards & Sterndrive Engines.

• Blended with premium quality base stocks and special additives that provide the ultimatein corrosion protection and reduced engine wear in the demanding marine environment
• Our SAE 10W-40 viscosity has been formulated for todays high tech 4-Stroke Outboards in allclimates plus it is ideal for Sterndrives and Inboards in cooler climates
• Our SAE 20W-50 viscosity has been formulated specifically to protect Sterndrive& Inboard Engines in High Performance & Heavy Load applications
• Use with Genuine Mallory Marine Oil Filters for maximum engine protection

Meets or Exceeds all Engine Manufacturers Warranty Requirements and is NMMA FC-W Certified.

Mallory Marine hereby warrants to the original retail purchaser, subject to the limitations and conditions incorporated herein, that Mallory Marine Products are free from defects in material and workmanship for a period of two (2) years from the original retail purchase.

To obtain warranty service for a claim without labor, return the Mallory Marine product along with proof of the date of the original retail purchase, freight prepaid to the distributor from whom the product was purchased, the distributor will then forward the product to Mallory Marine for valuation. If the product is determined by Mallory Marine to be eligible for warranty, Mallory Marine will credit the distributor and the Distributor will credit the selling dealer.

Product properly installed by a Qualified Dealer and determined by Mallory Marine to be defective, may be eligible for labor reimbursement. If the claim for warranty is determined by Mallory Marine to be valid Mallory Marine will advise the dealer of the extent of Mallory Marine’s responsibility. Mallory Marine will settle all labor claims directly with the dealer. Credit for the defective parts and parts related to the warranty repair only, will be issued to the distributor. The distributor will then issue credit to the dealer.

To obtain warranty service for a claim with labor, return the allegedly defective Mallory Marine product and any other related damaged parts, along with proof of the date of the original retail purchase, freight prepaid to: Mallory Marine, 10601 Memphis Ave., Cleveland, OH 44144.

The duties and obligations of Mallory Marine under this Limited Warranty are expressly limited to the repair or replacement (at the sole discretion of Mallory Marine) of Mallory Marine products, which, in the sole opinion of Mallory Marine, have been found to be covered under the terms and conditions of this Limited Warranty. Mallory Marine expressly disclaims any duty or obligation to repair or replace any product other than a Mallory Marine product.

This Limited Warranty shall become void if it is determined by Mallory Marine, in its sole discretion, that products submitted for warranty consideration failed due to normal wear, or show evidence of abuse, lack of proper maintenance, improper installation, misapplication, alteration in any way whatsoever from their original design or negligence in use. Mallory Marine reserves the right to extend only the fair market value on claims that cannot be rectified due to unavailability of replacements parts.

Mallory Marine expressly retains the right to make changes and improvements in any product that it manufactures and sells at any time, without notice and without any obligation to change the catalogs or printed matter. Mallory Marine retains the right to determine, in its sole discretion, whether or not any Mallory Marine product is covered by this Limited Warranty.

This Warranty is limited and expressly limits any implied warranty to two (2) years from the date of the original retail purchase on all Mallory Marine products and is nontransferable. Some states or countries do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.

No person, party or corporate entity other than Mallory Marine shall have the right to determine whether or not this Limited Warranty is applicable to any Mallory Marine product or to authorize any action whatsoever on behalf of Mallory Marine under the terms and conditions of this Limited Warranty. This Limited Warranty gives you specific legal rights, and you may also have other rights which may vary from state to state.

This Limited Warranty is in lieu of, and expressly excludes, any and all other warranties, express or implied, including any warranty of merchantability or of a fitness for a particular application or purpose.

Mallory was founded on Friday, February 13, 1925 by Marion Mallory Sr. Since then Mallory has been a basic manufacturer and original equipment (OEM) supplier of automotive and marine ignition parts for more than 50 years and various Mr. Gasket divisions have provided marine ignition, gasket, flywheels, private label filters and other component parts to many major OEM’s including Mercury, OMC, Volvo, PCM, INDMAR and many others. You'll find that Mallory's OEM experience gives us a distinct advantage over purely aftermarket companies.

Mallory Marine’s current product offerings in the marine segment includes thousands of service parts for every major engine and drive system on inboards, stern drives, and outboards including our traditional ignition products, distributors, ignitions, coils, and spark plug wire sets, fuel system products, gaskets and gasket sets, internal engine parts, electrical system service parts, cooling system parts, drive system parts such as seal kits, gear sets, gear housings and a complete line of marine lubricants.