Search
Quick Order
 Order with part #'s
Community
Forum | Blog | Groups
Search By
Manufacturer
Search:  
v500-bilge pump  boat marine attwood 4204-7


v500-bilge pump  boat marine attwood 4204-7

Attwood V500 Bilge Pump 12 VDC 36" wire 500 GPH

Manufacturer: Attwood Marine
Part Number: 4204-7
SKU: ATT-4204-7

THIS ITEM IS NO LONGER AVAILABLE - See Similar Products


The most popular bilge pump on the market. Our most compact pump, now modified to deliver more than 500 GPH at open flow and 350 GPH at a 3.3 ft. head while drawing only 1.4 amps - the lowest in the industry. Efficient - delivers at least 30 percent more flow per amp (GPH/amp) then competitive size pumps.

Attwood bilge pumps must be immersed in water for priming.

*Note* these have been discontinued by Attwood and are available while supplies last.
Product Rating: (0.00)   # of Ratings: 0   Rate It! Click Here to rate this product

There are no comments for this product. CLICK HERE to be the first one to share your opinion!
ATTWOOD LIMITED WARRANTY

Attwood Corporation, 1016 North Monroe, Lowell, Michigan 49331 (“Attwood”) warrants to the first consumer purchaser of its products that Attwood will replace or repair the product, at its sole discretion, if any defects in material or workmanship are reported within the applicable warranty periods set out below from the date of the first retail purchase, subject to the remedies, exclusions, and limitations in this Limited Warranty. This limited warranty is effective for all Attwood products purchased after May 1, 2008.

1. Boat Covers and Tops: *Attwood will apply the below percentages of the original purchase price of the boat cover as a discount off of the cost of a replacement boat cover for each of the prorated warranty periods set out below.

a. Silver Coat, Road Ready™ ,Snug Harbor Silver Series, and Custom Boat Covers: 3 years Prorated
From Purchase Date Discount* From Purchase Date Discount*
1st Full Year 100% 3rd Full Year 33%
2nd Full Year 67%
b. Road Max™ Boat Covers: 4 years Prorated
From Purchase Date Discount* From Purchase Date Discount*
1st Full Year 100% 3rd Full Year 50%
2nd Full Year 75% 4th Full Year 25%
c. Snug Harbor Titanium Series, Road Max™ 600 Boat Covers and Acrylic and Vinyl Bimini Tops: 5 years Prorated
From Purchase Date Discount* From Purchase Date Discount*
1st Full Year 100% 4th Full Year 40%
2nd Full Year 80% 5th Full Year 20%
3rd Full Year 60%
d. Boaters Best™ Boat Covers: 6 years Prorated
From Purchase Date Discount* From Purchase Date Discount*
1st Full Year 100% 4th Full Year 49%
2nd Full Year 83% 5th Full Year 32%
3rd Full Year 66% 6th Full Year 15%
e. Boaters Best™ Ultimate Boat Covers: 8 years Prorated
From Purchase Date Discount* From Purchase Date Discount*
1st Full Year 100% 5th Full Year 50%
2nd Full Year 88% 6th Full Year 37%
3rd Full Year 75% 7th Full Year 25%
4th Full Year 63% 8th Full Year 12%
2. Pumps:
a. Heavy Duty Bilge Pumps Installed on Recreational/Pleasure Boats (Part Numbers 4030,4040,4060,4070): 3 years
b. Heavy Duty Bilge Pumps Installed on Commercial Boats (Part Number 4030,4040,4060,4070): 1 year
c. V-Series Bilge Pumps (Part Numbers 4204, 4206, 4207, 4208, 4209, 4212, and 4224): 3 years
d. Sahara Series Automatic Bilge Pumps (Part Numbers 4505, 4507, 4508, 4511): 3 years
e. Tsunami Series Cartridge Bilge and Aerator Pumps (Part Numbers 4606, 4608, 4609, 4612, 4613, 4620, 4622, 4623, 4624, 4625, 4640, 4650, 4651, 4660, 4661, 4670, 4672): 3 years
3. Automatic Float Switch (Part Numbers 4201, 4202): 3 years
4. Electronic Bilge Switch (Part Numbers 4801, 4802): 3 years
5. Bilge Blowers:
a. Water-Resistant Turbo Bilge Blowers (Part Numbers 1733, 1743, and 1745): 3 years
b. Standard (Non Water-Resistant) Turbo Bilge Blowers (Part Numbers 1731 and 1741), except when used in applications which allow contact with liquids (Exception No. 2): 1 year
6. LED Lights: 10 years
7. 6 Gallon Gas Tank (Part Number 8867): 3 years
8. Pro-Series Rod Holders (Part Numbers 5002, 5003, and 5004): 5 years
9. ZAMAK Hardware, or Perma-Plate Parts: 2 years
10. Attwood Cast Stainless Steel Hardware: Life of the Boat
11. All other Attwood and Swivl-Eze Brand Products (subject to limitations below): 1 year

Statute of Limitations: Any action for rescission or revocation against Attwood shall be barred unless it is commenced within one (1) years from the date of accrual of such cause of action. This provision does not grant any consumer a right of rescission or revocation against Attwood, where such right does not otherwise exist under applicable law. Some states may not allow the applicable statute of limitations for rescission or revocation to be reduced, so this provision may not apply to each retail owner.

Other Limitations: EXCEPT AS SET FORTH HEREIN, THERE ARE NO OTHER WARRANTIES EITHER EXPRESS OR IMPLIED PROVIDED BY ATTWOOD ON THIS PRODUCT. ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING IMPLIED WARRANTIES OF FITNESS AND MERCHANTABILITY, ARE EXPRESSLY EXCLUDED. ATTWOOD FURTHER DISCLAIMS ANY LIABILITY FOR ECONOMIC LOSS ARISING FROM CLAIMS OF PRODUCT FAILURE, NEGLIGENCE, DEFECTIVE DESIGN, MANUFACTURING DEFECT, FAILURE TO WARN AND/OR INSTRUCT, LACK OF SEAWORTHINESS, AND ANY OTHER THEORY OF LIABILITY NOT EXPRESSLY COVERED UNDER THE TERMS OF THIS LIMITED WARRANTY. TO THE EXTENT REQUIRED BY LAW ANY IMPLIED WARRANTY OF MERCHANTABILITY IS LIMITED FOR THE DURATION OF THE RESPECTIVE EXPRESS LIMITED WARRANTIES STATED HEREIN. TO THE EXTENT ALLOWED BY LAW NEITHER ATTWOOD, NOR THE SELLING DISTRIBUTOR SHALL HAVE ANY RESPONSIBILITY FOR LOSS OF USE OF THE PRODUCT OR THE BOAT, LOSS OF TIME, INCONVENIENCE, COMMERCIAL LOSS OR CONSEQUENTIAL DAMAGES. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT BE APPLICABLE. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT BE APPLICABLE. THIS WARRANTY GIVES THE OWNER SPECIFIC LEGAL RIGHTS, AND THE OWNER MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE. RETAIL CUSTOMERS IN THE EUROPEAN ECONOMIC AREA (EEA) MAY HAVE LEGAL RIGHTS UNDER APPLICABLE NATIONAL LEGISLATION REGARDING THE SALE OF RETAIL GOODS WHICH ARE NOT AFFECTED BY THIS LIMITED WARRANTY. THE RETAIL CUSTOMER’S LEGAL RIGHTS UNDER ANY APPLICABLE NATIONAL LEGISLATION REGARDING THE SALE OF RETAIL GOODS SHALL NOT BE AFFECTED.

You can receive information relating to privacy and to this limited warranty in Europe on www.attwoodmarine.com and by contacting Attwood at the address listed on next page.

Sole Remedy: In no event shall any repair or replacement under this Limited Warranty exceed the fair market value of the product as of the date of the owner’s claim.

THE REMEDY OF REPAIR OR REPLACEMENT OF PARTS OR MATERIALS FOUND TO BE DEFECTIVE IN FACTORY MATERIALS OR WORKMANSHIP COVERED BY THIS LIMITED WARRANTY SHALL CONSTITUTE THE OWNER’S SOLE AND EXCLUSIVE REMEDY AGAINST ATTWOOD FOR ANY CLAIMS WHATSOEVER OF ECONOMIC LOSS RESULTING FROM PRODUCT FAILURE.

Acceptance of any product returned or any refund provided by Attwood shall not be deemed an admission that the product is defective. Products that are replaced become Attwood’s property. The terms and conditions contained in this limited warranty may not be modified, altered or waived by any action, inaction, or representations, whether oral or in writing, except upon the express, written authority of a management level employee of Attwood.

Exclusions: This Limited Warranty does not apply to the following items:

1. Any Attwood products used in other applications than on pleasure boats, including but not limited to non-marine use or use on boats which are utilized for racing or commercial purposes, with the exception of the Heavy Duty Bilge Pumps
installed on commercial boats (see 1b, above) (Part Numbers 4030,4040,4060,4070).

2. Any non water-resistant Turbo Bilge Blowers (Part Numbers 1731, and 1741) used in applications which allow direct contact with water or other liquids.

3. Due to wind velocity encountered when boats are trailered, only Snug Harbor™ Silver Series, Snug Harbor™ Titanium Series, Silver Coat, Road Ready™, Road Max™, Road Max™ 600, Boaters Best™, Boaters Best™ Ultimate, and Custom boat covers, when properly tied down, are warranted as suitable for use in connection with towing on a trailer. No warranty is extended on any other boat covers when used in connection with a trailered boat.

4. Damage to the boat cover or to any other property or any injury resulting from the failure to properly tie down a boat cover before towing is not covered.

5. Ancillary equipment used or associated with Attwood products, including but not limited to, batteries, fuses, electric light bulbs, lamps, or sealed beam units.

6. Any product damaged by accident, acts of nature, improper installation, unreasonable or improper use, lack of proper maintenance, unauthorized repairs or modifications, abuse, normal wear or tear, or other causes not arising from
defects in materials or workmanship.

7. Any expenses involved in the removal, reinstallation, or transportation of the product.

8. Any product damaged by the failure of the owner to use, maintain, or store the product as specified in any instructions.

9. Any boat cover torn or ripped because of forcing the fabric over sharp edges or corners, failing the protect the fabric from sharp objects, or allowing water, snow or ice to pool or puddle on the product.

10. Any boat cover fabric discoloration, or failure due to chemical exposure such as bird droppings, tree sap, gas, and oil or mildew due to water, snow or ice, dirt, leaves, pine needles resting on the product or the product stored while damp.

11. Any defect or repair requiring redesign of the Attwood product, except pursuant to the recall provisions of the United States Federal Boat Safety Act of 1971 or the recall laws of any other foreign jurisdiction.

Owner’s Obligations: It is the responsibility of the purchaser to return the product to Attwood at the address below, postage pre-paid, and insured with proof of original purchase including date.

Attwood Corporation
1016 North Monroe
Lowell, Michigan 49331

 
 From aerator pumps to ZAMAK lights, Attwood has thousands of superior-quality products to fit nearly every boat. First Choice Marine is one of the nations premier Attwood distributors and we carry a lot of the hard to find items that the discount store won't. We also handle a complete line of Swivl-Eze products as well, an Attwood brand. So if you need quality Attwood products, you have found your source.

Cockpit & InteriorAnchoringFuel SystemsBoat CoversBimini TopsMarine HardwareFishing AccessoriesVent and blowers


Attwood Marine Tsunami 500 GPH Cartridge Bilge Pump, 12VDC #4606-7
Attwood Marine Tsunami 500 GPH Cartridge Bilge Pump, 12VDC #4606-7
Boaters, boat-builders and dealers all want one thing from their bilge pumps - more power! And that's what the Tsunami® Series delivers... with high-capacity, high-efficiency output. Tsunami Cartridge pumps have replaceable, interchangeable motor cores. Makes servicing simple and quick.

500 GPH - Barbed - 3/4 inch I.D. Hose Size - 12 Volt - 36 inch wire - 3 5/8 inch high

Backed by Attwood's 3-Year Warranty!

ITEM IS AVAILABLE


Johnson Pumps-Mayfair 500 GPH Bilge Pump 22502
Johnson Pumps-Mayfair 500 GPH Bilge Pump 22502
High impact thermoplastic housing. Corrosion, chemical and fuel resistant. Permanently lubricated bearings. 316 stainless steel motor shaft and hardware. Compression lip seal. Abrasion resistant glass resin composite impeller. Tin coated 16 gauge wires 30" long. 3/4" O.D. discharge port. 12V. Ignition protected. Saltwater tough.

ITEM IS AVAILABLE


Rule 500 G.P.H. Bilge Pump #25D
Rule 500 G.P.H. Bilge Pump #25D
Rule 500

The Rule 500 offers many design features while keeping size and cost to a minimum. Especially popular on smaller craft, Rule 500 pumps are unmatched in pumping power and longevity. 3/4" (19mm) discharge outlet. 12 Volts DC unless noted.

Features:
  • Fully Submersible
  • Easy clean snap lock strainer
  • Silent and vibrationless operation
  • Anti-airlock protection
  • Compact, efficient long life motor
  • Ignition protected
  • No burn-out when run dry
  • Rust and Corrosion protection
  • Used by leading boatbuilders worldwide
  • marine grade blocked wiring

ITEM IS AVAILABLE


Johnson Pumps-Mayfair 500 GPH Cartridge Bilge Pump 32502
Johnson Pumps-Mayfair 500 GPH Cartridge Bilge Pump 32502
High impact thermoplastic housing. Corrosion, chemical and fuel resistant. Permanently lubricated bearings. 316 stainless steel motor shaft and hardware. Compression lip seal. Abrasion resistant glass resin composite impeller. Tin coated 16 gauge wires 30" long. 3/4" O.D. discharge port for 500, 750 and 1000 GPH. 1-1/8" O.D. discharge port for 1250 GPH. T-slot for easy float switch attachment. 12V.

ITEM IS AVAILABLE


Seasense-Bilge Pump 500 GPH #50010346
Seasense-Bilge Pump 500 GPH #50010346
Submersible 12-volt bilge pumps are tough enough for any bilge. Angled 360 degree swivel outlet is removable for easy installation and a perfect hose angle to prevent kinks. Features a quick release motor cartridge for ease of replacement without having to remove pump from bilge. Also has a quick release strainer for easy clean out should trash get around the strainer. The stainless steel shaft, oversized motor, tinned marine grade wiring and heavy-duty nylon housing allow for years of carefree service. The heavy-duty nylon strainer base can be conveniently mounted on the bottom or side with the included stainless steel screws. The 500 GPH and 800 GPH use 3/4" hose and the 1100 GPH uses 1-1/8" hose. Installation is simple with the detailed instructions inlcluded with every pump. Meets ABYC specification H-22. All SeaSense pumps are ignition protected, and have been tested by an independent laboratory.
DIMENSIONS: A: 4-1/2 in B: 3-1/4 in C: 3 in D: 3/4 in
Seasense 50010346 Illustration

ITEM IS AVAILABLE


Seasense-600 GPH Bilge Pump #50010410
Seasense-600 GPH Bilge Pump #50010410
The SeaSense submersible bilge pumps are tough enough for any bilge. The 600 GPH and 800 GPH use 3/4 in hose and the 1100 GPH uses 1-1/8 in hose. Meets ABYC specification H-22.
  • Quick Release Strainer Base for Easy Cleaning
  • Stainless Steel Shaft and Mounting Screws
  • 30 Inch Tinned Marine Grade Wire Leads
  • Universal Mounting Hole Positions
  • Impact Resistant ABS Housing
  • Certified Flow Rates
  • Ignition Protected
  • 3 Year Warranty

ITEM IS AVAILABLE


Seasense Cartrige 500 GPH 50010381
Seasense Cartrige 500 GPH 50010381
SeaSense replaceable bilge cartridge pumps feature angled 360-degree swivel removable outlet for easy installation and a perfect hose angle to prevent kinks. The 500 GPH uses 3/4" hose Meets ABYC specification H-22.
  • Quick Release Replaceable Motor Cartridge
  • Impact Resistant ABS Housing
  • Ignition Protected
  • Independently Lab Tested Certified Flow Rates
  • 30 Tinned Marine Grade Wire Leads
  • Stainless Steel Shaft & Mounting Hardware
  • Quick Release Strainer Base For Easy Cleaning

ITEM IS AVAILABLE




Ribbed Premium Bilge Hose 3/4" Black Model 82
Ribbed Premium Bilge Hose 3/4" Black (per foot)
Cuffed Bilge. Black. 3/4in. Extremely flexible and tough corrugated polyethylene hose for bilge intake and discharge. Cuffed every foot for clamping. Resists oily bilge and sea water. **Not recommended for below waterline thru-hull connections. Operating temperatures: (-40°- +200°).

SOLD BY THE FOOT

Product Available While Quantities Last


V1250-Bilge pump boat marine attwood 4212-7
Attwood V1250 Bilge Pump, 1250 GPH Pump 12VDC 36" wire
Great value - rated "Best Buy" by independent consumer publications. Delivers true 1250 GPH at open flow. High capacity for boats that require a higher output pump. 1-1/8" diameter hose outlet. 950 GPH at a 3.3 ft. head while drawing less than 3 amps. Available in 12-volt and 24-volt models.

Efficient - provides 40% to 60% more flow per amp (GPH/amp) than competitive 1000+ GPH pumps.

THIS ITEM IS NO LONGER AVAILABLE - See Similar Products


Automatic float switch 12 & 24 VDC CE rated 4202
Attwood Marine Automatic Float Switch Only, 12 VDC #4202-7
The Automatic Float Switch converts any bilge pump that draws 12 amps (at 12 VDC) or 6 amps (at 24 VDC) or less to fully automatic operation. It features a compact, low-profile design that mounts on any surface from horizontal up to a 24° angle. No large voltage drop which reduces bilge pump output like some reed switch designs. Incorporates a reliable and affordable mechanical switch that actuates pump motor at 2" water level. Wire leads do not flex or hinge with the float as on some competitive models. Integral cover dampens bilge sloshing to reduce pump cycling, and prevents debris interference. Sealed switch mechanism resists moisture, fume ignition and electrical shock. Contains no mercury, a "Persistent Toxic Substance" listed as a health hazard in more than 26 states.

Float switch installs independently or directly onto the rear slots of the V-Series pump bracket. Features a convenient test knob to test pump operation.

Rated 12 and 24 volt CE rated with 36 inch wire

For Float Switch with Cover use Part 4201-7

ITEM IS AVAILABLE


A500 Aerator Pump w/Long Inlet & Threaded 4240
A500 Aerator Pump w/Long Inlet and Threaded Outlet 500 GPH
Pumps 500 GPH at open flow, up to 325 GPH at 3' head. Ideal for small boats or boats with single, standard-capacity livewells. 1-1/2" inlet for recirculation pump. 12-volt D.C., CE rated.

The threaded outlet on this aerator pump can be converted for hose connection. Use one of the Thread-to-Barb connectors (included with aftermarket pump) or Flow-Rite™ Qwik-Lok™ couplers shown below in Related Products.

NOTICE: These pumps have been discontinued by Attwood, we have a limited quantity available. They have been replaced by the Tsunami series pump with a replaceable cartridge. Click here to see go to the Tsunami 500 Series pump.

THIS ITEM IS NO LONGER AVAILABLE - See Similar Products


Adjustable Locking Aerator Spray head 3/4" 4125
Attwood-Aerator Spray Head, Locking #4125-7
Use on livewells that have built-in overflows or recirculating systems. Mounts on side of tank. 90° fitting for installation in tight spaces. Rotating head with O-ring adjusts and maintains flow setting. Removable head. Polypropylene construction. Maximum tank thickness: 5/8".

ITEM IS AVAILABLE


standard Turbo 3000 Bilge Blower, 12V 1731-4
Attwood-Turbo 3000 - 3" Blower, White, 12 Volt #1731-4
Patented in-line design - provides ventilation for engine compartments, galleys, bilges, and heads. Mounting feet allow vertical or horizontal installation in confined spaces. Install with #10 fasteners. Individual carton includes 2 tie straps. All are CE certified. 16-gauge tinned and caulked copper wire leads with optional MP1 molded rubber connectors. New improved 3" design includes:

Nickel-plated motor can for corrosion resistance

Stiffening ribs to reduce housing distortion

Motor cap to seal wires and motor for water resistance

ITEM IS AVAILABLE


Remote Mounting Bracket, 3/4", Black 4122-3
Attwood-Remote Mounting Bracket, 3/4", Black Plastic #4122-3
Aerator Remote Mounting Bracket

For mounting the aerator pump to a base, away from the transom.

3/4" Aerator remote mounting bracket.

ITEM IS AVAILABLE


Waterproof Playing Cards Attwood Boating essentials 11856D1
Attwood-Waterproof Playing Cards #11856D1
Great for boating or camping.

100% plastic is both clear and durable.

If they get wet, just dry them off and keep playing!

Plastic storage case.

THIS ITEM IS NO LONGER AVAILABLE - See Similar Products





Shop boat insurance



First Choice Marine is an Upfront Merchant on TheFind. Click for info.