T111 Micronet Dual Digital Display (Multifunction)
T112 Micronet Analogue Display
T120 Micronet Wind Transmitter
T121 Mcironet Hull Transmitter
T122 Micronet Wireless NMEA Interface
T911 Speed Transducer (long body thru hull retractable)
T912 Depth Transducer (long body thru hull retractable)
T111 Micronet Dual Digital Display (Multifunction)
The Dual Digital Display shows two lines of data simultaneously. It can be configured at any time to display any information provided by your transmitters.
T112 Micronet Analogue Display
Multifunction digital analogue display for the Micronet system. Shows Apparent or True Wind Speed and Direction along with CH/VMG, GPS and Heading Information.
T120 Micronet Wind Transmitter
For the first time, you can have wind information without running cables down the mast. The Wind Transmitter measurres Wind Speed and Direction and sends data to any Micronet display via wireless link. It can be fitted (simple three-screw attachment) with the mast in place and makes un-stepping the mast easy too. Calibration for wind speed and direction is done at any display
T121 Micronet Hull Transmitter
The Speed, Depth and Compass Transducers link to the Hull Transmitter which sends the information to the Micronet Displays by wireless link. It can be sited anywhere conveient on the boat usually close to the transducers.
T122 Micronet Wireless NMEA Interface
This interface enables sailors to integrate other marine electronics into any of the Micronet instrument range. Compatible with instruments using the NMEA language, the Wireless NMEA Interface (2 inputs/1 output) collects data from autopilots, GPS, chartplotters, PDAs and other on board instruments and transmits it wirelessly to the Micronet displays. Plugged into an on board PC, Micronet can send and receive information so that navigation and tactical software can be displayed anywhere on deck.
The Wireless NMEA Interface may be used with PC software to create custom pages on the T110 Micronet Digital Display using Proprietary NMEA Sentences.
