00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Weld Mount System
Weld Mount 4" Mixing Tips for AT-8040 10-pk #80850
$20.26
$24.18
Weld Mount System 80850 Adhesives & SealantsAT-850 Square Mixing Tip f/AT-8040 - 4" - Case of 10Weld Mount's AT-850 tip is for use only with the AT-8040. It's unique design eliminates any possibility of the cartridge plugging up as the entry is separated.Features:
Square Mixing Tip
4" Long
Case of 10
Normalized SKU: 80850
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Weld Mount System
Weld Mount Acrylic Adhesive No Slide Multi Bonder #8040
$39.83
$47.79
Download Literature Watch VideoWeld Mount System 8040 Adhesives & SealantsNo Slide Metal/Composite BonderRevolutionary Metal Bonder will hold heavy parts at application without sliding either on a vertical or overhead surface. AT-8040 will hold 3,500lbs in 40 minutes. No Welding, Drilling or Tapping.Weld Mount AT-8040 is a solvent free, VOC Compliant, two part methacrylate-based, structural adhesive formulated to bond metals for use in severe environments. It will also bond engineered thermo- and thermosetting plastics, composites to metals or various substrate combinations. It has excellent adhesion to as received metal surfaces including aluminum, stainless steel, galvanized steel, and plated steels. AT-8040 forms a tough, high strength bonds usually with minimal surface preparation developing handling strength in 12 minutes and a functional cure within 45 minutes. Ultimate strength exceeds 3500 psi of tensile shear strength on aluminum with remarkable impact and peel strengths. AT-8040 will hold all Weld Mount parts on a vertical or overhead surface without sagging when properly used.Features:
Revolutionary Adhesive
Parts Stay Where Placed Without Sliding
For Use Overhead and on Vertical Surfaces
No Need for Fixtures
Normalized SKU: 8040Weld Mount System 8040 Literature Download Quick Reference GuideWeld Mount System 8040 Video
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Weld Mount System
Weld Mount Acrylic Adhesive with Plunger #1030
$19.64
$23.44
Download Literature Watch VideoWeld Mount System 1030 Adhesives & SealantsAcrylic AdhesiveCAN NOT SHIP AIR,UPS GROUND ONLYAT-1030 is a good general purpose adhesive packaged in a manual plunger cartridge. Simply snip off the two end caps and dispense the needed amount of adhesive onto a clean surface and mix it by hand. AT-1030 cures in 10 - 12 minutes, has a 6 minute working time and develops working strength in 40 minutes. AT-1030 has a 12 month shelf life when stored at 72 degrees. We recommend that where ever possible this adhesive be refrigerated. Packaged in a 30ml cartridge this adhesive does not require the adhesive gun or mixing tips. The 30ml cartridge will bond 30 - 50 parts. Normalized SKU: 1030UPC Code: 201860011209Weld Mount System 1030 Literature Download Product BrochureWeld Mount System 1030 Video
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Weld Mount System
Weld Mount Acrylic Adhesive with Plunger #804030
$21.68
$25.88
Weld Mount System 804030 Adhesives & Sealants8040 Acrylic Adhesive with Plunger CANNOT SHIP AIR - UPS GROUND ONLYAT-8040 is a good general purpose adhesive packaged in a manual plunger cartridge. Simply snip off the two end caps and dispense the needed amount of adhesive onto a clean surface and mix it by hand. AT-8040 cures in 10-12 minutes, has a 6 minute working time and develops working strength in 40 minutes. AT-8040 has a 12 month shelf life when stored at 72°. Weld Mount recommends that where ever possible this adhesive be refrigerated. Packaged in a 30ml cartridge this adhesive does not require the adhesive gun or mixing tips. The 30ml cartridge will bond 30-50 parts. Normalized SKU: 804030
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Weld Mount System
Weld Mount Adhesively Bonded Fastener Kit #65100
$153.56
$195.04
Weld Mount System 65100 Adhesives & SealantsAdhesively Bonded Fastener Kit with AT 8040 AdhesiveKit Contains:
(1) Plano Storage Box - 11" x 7.25" x 2.75"
(50) AT-5 Tie Mount (White)
(1) AT-8040 Adhesive
(5) AT-850 Mixing Tip
(1) AT-300 Dispensing Gun
(2) AT-113B Black Footmans Loop
(4) ST125-1420-12 Stainless Stud
Normalized SKU: 65100
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Weld Mount System
Weld Mount Adhesively Bonded Fastener Kit #65100-KIT
$144.99
$179.98
Weld Mount System 65100-KIT Adhesives & Sealants Normalized SKU: 65100KIT
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Weld Mount System
Weld Mount AT-1030 Acrylic Adhesive with Plunger 10-pk #103010
$133.40
$165.60
Weld Mount System 103010 UtilityAcrylic Adhesive w/Plunger - 10-PackCAN NOT SHIP AIR,UPS GROUND ONLYAT-1030 is a good general purpose adhesive packaged in a manual plunger cartridge. Simply snip off the two end caps and dispense the needed amount of adhesive onto a clean surface and mix it by hand. AT-1030 cures in 10 - 12 minutes, has a 6 minute working time and develops working strength in 40 minutes. AT-1030 has a 12 month shelf life when stored at 72 degrees. We recommend that where ever possible this adhesive be refrigerated. Packaged in a 30ml cartridge this adhesive does not require the adhesive gun or mixing tips. The 30ml cartridge will bond 30 - 50 parts. Normalized SKU: 103010
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Weld Mount System
Weld Mount AT-113B Large Footmans Strap 100-pk #AT-113B-100
$311.68
$395.85
Weld Mount System AT-113B-100 Ties & WrapsWeld Mount AT-113B Large Footmans Strap 100-pk #AT-113B-100Normalized SKU: AT113B100
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Weld Mount System
Weld Mount AT-13 10-to-1 Gun Plunger for AT-6030 Adhesive #8013
$13.95
$16.65
Weld Mount System 8013 Fasteners10:1 Gun Plunger for AT-6030 AdhesiveSingle Pack gun plunger for AT-6030 Adhesive Normalized SKU: 8013
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Weld Mount System
Weld Mount AT-13 10-to-1 Gun Plunger for AT-6030 Adhesive #801310
$98.98
$122.87
Weld Mount System 801310 Fasteners10:1 Gun Plunger for AT-6030 Adhesive10 Pack Gun Plunger for AT-6030 Adhesive Normalized SKU: 801310
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Weld Mount System
Weld Mount AT-14 1-to-1 Adhesive Gun Plunger #8014
$14.06
$16.78
Weld Mount System 8014 Adhesives & SealantsAT-14 1 to 1 Adhesive Gun Plunger f/AT-2010, AT-4020 & AT-6030 AdhesivesAT-14 is specifically for Weld Mount AT-2010, AT-4020 and AT-6030 adhesives. Normalized SKU: 8014UPC Code: 801400000000
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Weld Mount System
Weld Mount AT-2010 Acrylic Adhesive #2010
$39.86
$47.83
Download Literature Watch VideoWeld Mount System 2010 Adhesives & SealantsAcrylic AdhesiveCAN NOT SHIP AIR,UPS GROUND ONLYAT-2010 is our biggest seller and is a unique adhesive. It has high viscosity and will hold smaller parts without sagging. AT-2010 cures in 5 - 6 minutes, has a 4 minute working time and develops working strength in 15 -20 minutes. This makes AT-2010 the ideal adhesive for applications which require an immediate high strength bond. AT-2010 has a 6 month shelf life when stored at 72 degrees. We recommend that where ever possible this adhesive be refrigerated. Packaged in a 50ml cartridge and can be mixed by hand or by using our AT-300 gun and mixing tips. The 50ml cartridge will bond 150 - 200 parts.** AT 850 Mixing Tips sku 56273 required ** Normalized SKU: 2010Weld Mount System 2010 Literature Download Product BrochureWeld Mount System 2010 Video
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Weld Mount System
Weld Mount AT-3 Small White Tie Mount 100-pk #803900
$54.60
$65.52
Weld Mount System 803900 Ties & WrapsWhite Nylon Wire Tie MountThe AT-3 tie mount is smaller for panel and other small space applications. This part is molded in white nylon and is sized for a #3 wire tie with a maximum width of .20". Average pull strength is about 50 lbs. The square base measures .44" wide. Use this smaller wire tie for runs with only a few wires or where space prevents use of our larger tie mounts. Excellent for mounting compass wires on center console boats and for overhead panel runs. Normalized SKU: 803900UPC Code: 201860001200
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Weld Mount System
Weld Mount AT-3 Small White Tie Mount 30-pk #803
$15.48
$18.48
Weld Mount System 803 Ties & WrapsWhite Nylon Wire Tie MountThe AT-3 tie mount is smaller for panel and other small space applications. This part is molded in white nylon and is sized for a #3 wire tie with a maximum width of .20". Average pull strength is about 50 lbs. The square base measures .44" wide. Use this smaller wire tie for runs with only a few wires or where space prevents use of our larger tie mounts. Excellent for mounting compass wires on center console boats and for overhead panel runs. Normalized SKU: 803UPC Code: 201860003907
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Weld Mount System
Weld Mount AT-3 Small White Tie Mount 500-pk #803500
$249.34
$316.68
Weld Mount System 803500 Ties & WrapsAT-3 Small White Nylon Tie Mount - Qty. 500The AT-3 tie mount is smaller for panel and other small space applications. This part is molded in white nylon and is sized for a #3 wire tie with a maximum width of .20". Average pull strength is about 50 lbs. The square base measures .44" wide. Use this smaller wire tie for runs with only a few wires or where space prevents use of our larger tie mounts. Excellent for mounting compass wires on center console boats and for overhead panel runs. Normalized SKU: 803500
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Weld Mount System
Weld Mount AT-3 Small Wht Tie Mount 50-pk #803950
$30.36
$36.24
Weld Mount System 803950 Ties & WrapsWhite Nylon Wire Tie MountThe AT-3 tie mount is smaller for panel and other small space applications. This part is molded in white nylon and is sized for a #3 wire tie with a maximum width of .20". Average pull strength is about 50 lbs. The square base measures .44" wide. Use this smaller wire tie for runs with only a few wires or where space prevents use of our larger tie mounts. Excellent for mounting compass wires on center console boats and for overhead panel runs. Normalized SKU: 803950UPC Code: 201860001309
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Weld Mount System
Weld Mount AT-300 Adhesive Gun for AT-2010/AT-4020 #80300
$74.55
$89.46
Weld Mount System 80300 Adhesives & SealantsAdhesive Dispensing GunThe AT-300 Adhesive dispensing gun has a 1:1 plunger for use with AT-2010 and AT-4020 50ml cartridges. When using AT-6030 adhesive it requires AT-12 (10 to 1 plunger). Replacement plungers are also available. Normalized SKU: 80300UPC Code: 201860011407
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Weld Mount System
Weld Mount AT-301 Adhesive Dispensing Gun with 10:1 Plunger #80301
$52.50
$63.00
Weld Mount System 80301 FastenersAdhesive Dispensing Gun with 10:1 Plunger for AT-6030 Adhesive OnlyThe AT- 301 Adhesive Dispensing Gun Is Designed Specifically For Use With Our AT-6030 38 ml 10:1 Adhesive Cartridge. This Hand Operated Gun And Our Mixing Tips Provide Precise Mixing And Dispensing Of Our Adhesives. The Mixing Tip Is Easily Replaced Should The Glue Set Up. We Recommend 5 Mixing Tips Per Cartridge Of Adhesive. A 10:1 Adhesive Plunger Is Included With Gun. Normalized SKU: 80301
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Weld Mount System
Weld Mount AT-3B Small Black Tie Mount 100-pk #803900B
$54.60
$65.52
Weld Mount System 803900B General ToolsBlack Nylon Wire Tie MountThe AT-3 tie mount is smaller for panel and other small space applications. This part is molded in black nylon and is sized for a #3 wire tie with a maximum width of .20". Average pull strength is about 50 lbs. The square base measures .44" wide. Use this smaller wire tie for runs with only a few wires or where space prevents use of our larger tie mounts. Excellent for mounting compass wires on center console boats and for overhead panel runs. Normalized SKU: 803900B
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Weld Mount System
Weld Mount AT-3B Small Black Tie Mount 50-pk #803950B
$30.36
$36.24
Weld Mount System 803950B General ToolsBlack Nylon Wire Tie MountThe AT-3 tie mount is smaller for panel and other small space applications. This part is molded in black nylon and is sized for a #3 wire tie with a maximum width of .20". Average pull strength is about 50 lbs. The square base measures .44" wide. Use this smaller wire tie for runs with only a few wires or where space prevents use of our larger tie mounts. Excellent for mounting compass wires on center console boats and for overhead panel runs. Normalized SKU: 803950B
Frequently Asked Questions
First Choice Marine is an online marine retailer carrying a diverse line of marine parts and accessories and related items from industry-respected and demanded manufacturers and suppliers. Through our diverse distributor network, we are able to access over 150,000 items, including our current site inventory, new products being added, and special order items. If you need it on your boat... we are your one-stop shop!
Yes, we offer FREE Shipping on most orders over $149 to US-48*.
Each product displays a shipping status message, just above the item price. Below is the meaning for each of these codes.
- Qualifies for Free Shipping: This item qualifies for free shipping when the order is $149+
- Qualifies for Free Ground Shipping: This item qualifies for free ground shipping when the order is $149+.
- Oversized - Not Qualified for Free Shipping: This item is too large/heavy to qualify for free shipping
- Hazardous Item - Not Qualified for Free Shipping: This item is hazardous and does not qualify for free shipping
- Truck Freight - Not Qualified for Free Shipping: This item has to be shipped via truck freight. Please contact us for a quote
- In-Store Pickup Only: This item can only be picked up in our Grain Valley, MO retail store
Below the price of the item, on the product page, there is a message indicating the availability of the product.
The quantity on hand is updated as inventory events happen and matches what we have available. If you have urgent needs and we are close to what you need, contact us, and we can confirm stock.
We offer a hassle-free return policy. If you're not completely satisfied with your purchase, you can return it within 30 days for a full refund or exchange.
If you need to return an item, please follow the guidelines here so we can process a prompt refund and assist you in finding the correct item.
Free Shipping
On most orders $149+ to the continental 48 US states.Secure Shopping
Fast, secure checkout with a variety of payment methods.Shop with confidence
25+ years serving the marine industry.Support center
Need help? Contact us via live chat, phone, or email.