Download LiteratureOctopus Autopilot Drives OCTAF1212LAM12 AutopilotsLinear ActuatorsOCTAF1212LAM12An Octopus Hydraulic Linear Actuator is a simple, effective way to drive the rudder on a boat equipped with a mechanical steering system. The linear actuator is an assembly of an Octopus reversing pump and a marine hydraulic cylinder. This assembly is mounted on the rudder tiller-arm or quadrant. When the autopilot is not in use the cylinder runs freely along with the rudder. When the automatic pilot is in use a solenoid valve on the actuator closes and locks the cylinder. Steering signals from the pilot are now fed to the D.C. motor, which drives the pump to move the cylinder back and forth. De-energized, the solenoid valve immediately disconnects the automatic pilot from the rudder. The actuator has a small translucent oil reservoir, making it easy to check fluid levels. These actuators have only five moving parts. Mechanical simplicity gives our product reliability and ease of service when compared to complicated gear and screw actuators, making our units a favorite for offshore mariners. These actuators are shipped from our factory completely filled with oil and require no additional plumbing.FeaturesAverage Current 4-6 amps Max Current 19amps 12vDC Cylinder Bore: 38mm Variable Flow Rate: 600cc-1.2 litre/min Stroke: 305mm/12in Hardover Time(Suggested): 14-16 sec Max Rudder Torque: 1,200Nm/10,600lbin Peak Thrust: 400Kg/882lbs Max boat Length: 18m/60' Specifications: Boat Length - Max (Feet) = NONE Capacity - Max Ram (CU) = NONE Drive Type = NONE Feedback Type = NONE Pilot Type = NONE Remote Capable = NONE Turn Patterns = NONE Vessel Displacement - Max (Pounds) = NONE Normalized SKU: OCTAF1212LAM12UPC Code: 628309134785Octopus Autopilot Drives OCTAF1212LAM12 Literature Download   Quick Reference Guide

  Download LiteratureOctopus Autopilot Drives OCTAF1212LAR12 AutopilotsLinear ActuatorsOCTAF1212LAR12An Octopus Hydraulic Linear Actuator is a simple, effective way to drive the rudder on a boat equipped with a mechanical steering system. The linear actuator is an assembly of an Octopus reversing pump and a marine hydraulic cylinder. This assembly is mounted on the rudder tiller-arm or quadrant. When the autopilot is not in use the cylinder runs freely along with the rudder. When the automatic pilot is in use a solenoid valve on the actuator closes and locks the cylinder. Steering signals from the pilot are now fed to the D.C. motor, which drives the pump to move the cylinder back and forth. De-energized, the solenoid valve immediately disconnects the automatic pilot from the rudder. The actuator has a small translucent oil reservoir, making it easy to check fluid levels. These actuators have only five moving parts. Mechanical simplicity gives our product reliability and ease of service when compared to complicated gear and screw actuators, making our units a favorite for offshore mariners. These actuators are shipped from our factory completely filled with oil and require no additional plumbing. Features Average Current 4-6 amps Max Current 19amps 12vDC Cylinder Bore: 38mm Variable Flow Rate: 600cc-1.2 litre/min Stroke: 305mm/12in Hardover Time(Suggested): 14-16 sec Max Rudder Torque: 1,200Nm/10,600lbin Peak Thrust: 400Kg/882lbs Max boat Length: 18m/60' Specifications: Boat Length - Max (Feet) = NONE Capacity - Max Ram (CU) = NONE Drive Type = NONE Feedback Type = NONE Pilot Type = NONE Remote Capable = NONE Turn Patterns = NONE Vessel Displacement - Max (Pounds) = NONE Normalized SKU: OCTAF1212LAR12UPC Code: 628309134792Octopus Autopilot Drives OCTAF1212LAR12 Literature Download   Quick Reference Guide

Octopus Autopilot Drives OC17SUK42 Autopilots30" Hose & Fitting Kit Including Orb & NPT Helm FittingsHydraulic Hose & Fittings Kit Includes: (2) - 30" Flexible High Pressure Hyd. Hose's (1) - 30" Flexible Low Pressure Hyd. Hose (4) - 90° Hyd. Elbow Fittings (4) - Straight Hyd. Fittings (2) - T Fittings Specifications:Boat Length - Max (Feet) = NONE Capacity - Max Ram (CU) = NONE Drive Type = NONE Feedback Type = NONE Pilot Type = NONE Remote Capable = NONE Turn Patterns = NONE Vessel Displacement - Max (Pounds) = NONENormalized SKU: OC17SUK42UPC Code: 628309248321

  Download LiteratureOctopus Autopilot Drives OCTAF1012LAM7 AutopilotsLinear ActuatorsOCTAF1012LAM7An Octopus Hydraulic Linear Actuator is a simple, effective way to drive the rudder on a boat equipped with a mechanical steering system. The linear actuator is an assembly of an Octopus reversing pump and a marine hydraulic cylinder. This assembly is mounted on the rudder tiller-arm or quadrant. When the autopilot is not in use the cylinder runs freely along with the rudder. When the automatic pilot is in use a solenoid valve on the actuator closes and locks the cylinder. Steering signals from the pilot are now fed to the D.C. motor, which drives the pump to move the cylinder back and forth. De-energized, the solenoid valve immediately disconnects the automatic pilot from the rudder. The actuator has a small translucent oil reservoir, making it easy to check fluid levels. These actuators have only five moving parts. Mechanical simplicity gives our product reliability and ease of service when compared to complicated gear and screw actuators, making our units a favorite for offshore mariners. These actuators are shipped from our factory completely filled with oil and require no additional plumbing.FeaturesAverage Current 4-6 amps Max Current 19amps 12vDC Cylinder Bore: 38mm Variable Flow Rate: 500cc - 1 litre/min Stroke: 178mm/7in Hardover Time(Suggested): 12-14 sec Max Rudder Torque: 750Nm/6,630lbin Peak Thrust: 400Kg/882lbs Max boat Length: 14m/45' Specifications: Boat Length - Max (Feet) = NONE Capacity - Max Ram (CU) = NONE Drive Type = NONE Feedback Type = NONE Pilot Type = NONE Remote Capable = NONE Turn Patterns = NONE Vessel Displacement - Max (Pounds) = NONE Normalized SKU: OCTAF1012LAM7UPC Code: 628309134679Octopus Autopilot Drives OCTAF1012LAM7 Literature Download   Quick Reference Guide

  Download LiteratureOctopus Autopilot Drives OCTAF1012LAR7 AutopilotsLinear ActuatorsOCTAF1012LAR7An Octopus Hydraulic Linear Actuator is a simple, effective way to drive the rudder on a boat equipped with a mechanical steering system. The linear actuator is an assembly of an Octopus reversing pump and a marine hydraulic cylinder. This assembly is mounted on the rudder tiller-arm or quadrant. When the autopilot is not in use the cylinder runs freely along with the rudder. When the automatic pilot is in use a solenoid valve on the actuator closes and locks the cylinder. Steering signals from the pilot are now fed to the D.C. motor, which drives the pump to move the cylinder back and forth. De-energized, the solenoid valve immediately disconnects the automatic pilot from the rudder. The actuator has a small translucent oil reservoir, making it easy to check fluid levels. These actuators have only five moving parts. Mechanical simplicity gives our product reliability and ease of service when compared to complicated gear and screw actuators, making our units a favorite for offshore mariners. These actuators are shipped from our factory completely filled with oil and require no additional plumbing.FeaturesAverage Current 4-6 amps Max Current 19amps 12vDC Cylinder Bore: 38mm Variable Flow Rate: 500cc - 1 litre/min Stroke: 178mm/7in Hardover Time(Suggested): 12-14 sec Max Rudder Torque: 750Nm/6,630lbin Peak Thrust: 400Kg/882lbs Max boat Length: 14m/45' Specifications: Boat Length - Max (Feet) = NONE Capacity - Max Ram (CU) = NONE Drive Type = NONE Feedback Type = NONE Pilot Type = NONE Remote Capable = NONE Turn Patterns = NONE Vessel Displacement - Max (Pounds) = NONE Normalized SKU: OCTAF1012LAR7UPC Code: 628309134686Octopus Autopilot Drives OCTAF1012LAR7 Literature Download   Quick Reference Guide

Octopus Autopilot Drives OC15SUK10 Autopilots90° Bezel Mounting Kit for Straight Shaft Drive90° bezel mounting kit for straight shaft drive. Specifications:Boat Length - Max (Feet) = NONE Capacity - Max Ram (CU) = NONE Drive Type = NONE Feedback Type = NONE Pilot Type = NONE Remote Capable = NONE Turn Patterns = NONE Vessel Displacement - Max (Pounds) = NONENormalized SKU: OC15SUK10UPC Code: 628309133658

Octopus Autopilot Drives OCTAF1212 AutopilotsAutopilot Pump Type 2 - Adjustable Reversing Pump - 12V up to 22 CI CylinderNow with ORB Port Connection manifoldReversing pumps are used when hydraulic steering is fitted on boats up to 65 feet L.O.A. (depending on rudder torque). The pumps are switched on by the automatic pilot and make a steering correction to left or right determined by the direction of rotation of the pump motor. The motors are of the permanent magnetic type and reversing direction is accomplished by reversing the motor input current.The pump has only three moving parts and requires no complicated check valves to prevent rudder movement when de-energized. Output flow is completely adjustable to 50% of rated flow allowing the pump output to be adjusted precisely to the volume of steering cylinder fitted. The pump is exceptionally reliable and delivers more than twice the hydraulic output per watt of input than gear pumps manufactured by competitors.Motors are heavy duty, a full 85mm in diameter with long brushes and sealed ball bearings for long service life. The molded rubber mounting foot can be rotated to allow the pump to be mounted on any surface.A useful range of accessories can be used to enhance the pump by incorporating added valves and solid state FET switching. The valves mount directly to the pump body. The FET switch mounts adjacent to the pump. No other autopilot pump made offers such advantages.Benefits of the Octopus Reversing PumpsPiston pump technology giving higher efficiency and accuracy Fewer moving parts giving increased reliability Variable flow rate to make sure the pump is matched as accurately as possible to the manual steering system Professional cut off valves for simple servicing.Features: Average Current 4-6 amps Max Current 19amps 12vDC Cylinder Size: 11-22ci Flow Rate(adjustable): 600cc - 1.2 litre/min Specifications:Vessel Displacement - Max (Pounds) = NONE Turn Patterns = NONE Remote Capable = NONE Pilot Type = NONE Feedback Type = NONE Drive Type = NONE Capacity - Max Ram (CU) = NONE Boat Length - Max (Feet) = NONENormalized SKU: OCTAF1212UPC Code: 628309272777

Octopus Autopilot Drives OCTAF2012 AutopilotsAutopilot Pump Type 3 Adjustable Reversing 12V Up to 30CI CylinderFeatures: RELIABLE - Piston pump technology with only three moving parts TWIC THE POWER - Delivers over twice the hydraulic output per watt of input HALF THE POWER CONSUMPTION - Accurate ram positioning means fewer course corrections ADJUSTABLE FLOW RATE - Configure performance to suit your vessel EASY SERVICING - Shut off valves allow removal without draining steering system TWICE THE POWERThe unique Octopus piston pump delivers over twice the hydraulic output per watt of input than a standard hydraulic gear pump.HALF THE POWER CONSUMPTIONGear pumps leak oil between the gears, while a piston (such as used in car engines) does not.  This means the piston pump will place the cylinder ram exactly where it is required, positioning the rudder accurately.  This gives far sharper steering, reducingunnecessary course corrections meaning battery consumption on Octopus pumps is up to half that of other pumps.PINPOINT ACCURACYLeading autopilot manufacturers choose Octopus pumps for their non RFB pilot systems which do not have a Rudder Feedback unit. Previously, slop in the system caused by gear leakage meant that a Rudder Feedback unit was necessary to tell the pilot the exact rudder position. As Octopus pumps will always bring the ram back to the required position the Rudder Feedback unit is not required, which also greatly simplifies installation.SAVE ON INSTALLATION COSTSA professional installation should always have a method of isolating the pump from the steering system - Octopus pumps feature inbuilt shut off valves in the pump manifold.ADJUSTABLE FLOW RATEA pump that does not have variable flow (unless dedicated to a range of cylinders such as our fixed 0.8L pump) will be operating too fast or too slow in 90% of cases.  Autopilot manufacturers get around this problem by adjusting the output to the pump to compensate, which either forces the pump to operate for longer periods of time which increases power consumption and wear on the parts, or it will operate at high pressure for short periods of time - also putting unnecessary strain and wear on the system.Octopus Variable Flow Reversing Pumps precisely control the speed of the ram, reducing unnecessary battery consumption, pressure, strain and wear on the hydraulic system. Specifications:Vessel Displacement - Max (Pounds) = NONE Turn Patterns = NONE Remote Capable = NONE Pilot Type = NONE Feedback Type = NONE Drive Type = NONE Capacity - Max Ram (CU) = NONE Boat Length - Max (Feet) = NONENormalized SKU: OCTAF2012UPC Code: 628309272791

Octopus Autopilot Drives OCTAF1012 AutopilotsAutopilot Pump Type 1 Adjustable Reversing 12V Up To 18 CI CylinderTWICE THE POWERThe unique Octopus piston pump delivers over twice the hydraulic output per watt of input than a standard hydraulic gear pump.HALF THE POWER CONSUMPTIONGear pumps leak oil between the gears, while a piston (such as used in car engines) does not.  This means the piston pump will place the cylinder ram exactly where it is required, positioning the rudder accurately.  This gives far sharper steering, reducingunnecessary course corrections meaning battery consumption on Octopus pumps is up to half that of other pumps.PINPOINT ACCURACYLeading autopilot manufacturers choose Octopus pumps for their non RFB pilot systems which do not have a Rudder Feedback unit. Previously, slop in the system caused by gear leakage meant that a Rudder Feedback unit was necessary to tell the pilot the exact rudder position. As Octopus pumps will always bring the ram back to the required position the Rudder Feedback unit is not required, which also greatly simplifies installation.SAVE ON INSTALLATION COSTSA professional installation should always have a method of isolating the pump from the steering system - Octopus pumps feature inbuilt shut off valves in the pump manifold.ADJUSTABLE FLOW RATEA pump that does not have variable flow (unless dedicated to a range of cylinders such as our fixed 0.8L pump) will be operating too fast or too slow in 90% of cases.  Autopilot manufacturers get around this problem by adjusting the output to the pump to compensate, which either forces the pump to operate for longer periods of time which increases power consumption and wear on the parts, or it will operate at high pressure for short periods of time - also putting unnecessary strain and wear on the system.Octopus Variable Flow Reversing Pumps precisely control the speed of the ram, reducing unnecessary battery consumption, pressure, strain and wear on the hydraulic system.Getting the best steering performance for the boat. The flow rate of the pump can be set to get the best hard over time (cylinder ram speed) for the particular boat. Features: Reliable - Piston pump technology with only three moving parts Twice the Power - Delivers over twice the hydraulic output per watt of input Half the Power Consumption - Accurate ram positioning means fewer course corrections Adjustable Flow Rate - Configure performance to suit your vessel Easy Servicing - Shut off valves allow removal without draining steering system Specifications:Vessel Displacement - Max (Pounds) = NONE Turn Patterns = NONE Remote Capable = NONE Pilot Type = NONE Feedback Type = NONE Drive Type = NONE Capacity - Max Ram (CU) = NONE Boat Length - Max (Feet) = NONENormalized SKU: OCTAF1012UPC Code: 628309272753

Octopus Autopilot Drives OCTOIL1USQ Steering KitsHydraulic Steering Fluid - QuartFeatures: Applications: All Hydraulic Steering Systems Type: ISO 15 Low Temp Mineral Hydraulic Fluid Select Container Size: Quart Specifications:Cable Length (Feet) = NONENormalized SKU: OCTOIL1USQUPC Code: 628309255541

  Download LiteratureOctopus Autopilot Drives OCTAFG1012 AutopilotsHydraulic Gear Pump 12V 10-15CI CylinderFrom the design team that brought you the legendary Octopus hydraulicdrives, our new gear pump offers industry leading reliability andperformance in a smaller, lighter, quieter package.Features: Industry leading efficiency - lower power consumption, particularlyunder demanding conditions requiring higher flow rates equates to a majoradvantage over competing units. Cost saving - the increased efficiency and performance means the pumpscan be used with smaller autopilot course computers than equivalent driveunits. The smaller footprint of the compact gear pump increases installationflexibility. Lower noise and vibration make the gear pump particularly suitable forsailboat installations. Suitable for balanced or unbalanced cylinders. All models available for both 12v and 24v systems. Specifications: Flow Rate: 1000CC/min Voltage: 12 Volt Cylinder Range: 10-15ci CYLINDER Average Current Draw: 5A Operating Temperature: -15 to +75'C (5 - 167'F) Waterproofing: IP55 Ignition Protection: ISO 8846 & SAEJ1171 EMC Compliance: EN60945-9-2002 Specifications:Boat Length - Max (Feet) = NONE Capacity - Max Ram (CU) = NONE Drive Type = Hydraulic Feedback Type = NONE Pilot Type = NONE Remote Capable = NONE Turn Patterns = NONE Vessel Displacement - Max (Pounds) = NONENormalized SKU: OCTAFG1012UPC Code: 628309191443Octopus Autopilot Drives OCTAFG1012 Literature Download  Quick Reference Guide

  Download LiteratureOctopus Autopilot Drives OCTAFG1612 AutopilotsHydraulic Gear Pump 12V 16-24CI CylinderFrom the design team that brought you the legendary Octopus hydraulicdrives, our new gear pump offers industry leading reliability andperformance in a smaller, lighter, quieter package.Features: Industry leading efficiency - lower power consumption, particularlyunder demanding conditions requiring higher flow rates equates to a majoradvantage over competing units. Cost saving - the increased efficiency and performance means the pumpscan be used with smaller autopilot course computers than equivalent driveunits. The smaller footprint of the compact gear pump increases installationflexibility. Lower noise and vibration make the gear pump particularly suitable forsailboat installations. Suitable for balanced or unbalanced cylinders. All models available for both 12v and 24v systems. Specifications: Flow Rate: 1600CC/min Voltage: 12 Volt Cylinder Range: 16-24ci CYLINDER Average Current Draw: 6.6A Operating Temperature: -15 to +75'C (5 - 167'F) Waterproofing: IP55 Ignition Protection: ISO 8846 & SAEJ1171 EMC Compliance: EN60945-9-2002 Specifications:Boat Length - Max (Feet) = NONE Capacity - Max Ram (CU) = NONE Drive Type = Hydraulic Feedback Type = NONE Pilot Type = NONE Remote Capable = NONE Turn Patterns = NONE Vessel Displacement - Max (Pounds) = NONENormalized SKU: OCTAFG1612UPC Code: 628309201616Octopus Autopilot Drives OCTAFG1612 Literature Download  Quick Reference Guide

Octopus Autopilot Drives OCTAFG2012 AutopilotsHydraulic Gear Pump - 12V - 20-30CI Cylinder - 2000cc/minGear Pump Offers Industry Leading Reliability and Performance in a Smaller, Lighter, Quieter Package.Features: High Efficiency – Industry leading efficiency minimizes power consumption Low Noise – New industry design offers significantly quieter operation Light Weight & Compact – Small footprint offers greater installation flexibility Wide Range Of Products – From 600 to 1600cc/min, 12v and 24v options Professional Solutions for Hydraulically Steered Boats: Industry Leading Efficiency – lower power consumption, particularly under demanding conditions requiring higher flow rates equates to a major advantage over competing units. Cost Savings – the increased efficiency and performance means the pumps can be used with smaller autopilot course computers than equivalent drive units. The smaller footprint of the compact gear pump increases installation flexibility. Lower noise and vibration make the gear pump particularly suitable for sailboat installations. Suitable for balanced or unbalanced cylinders. All models available for both 12v and 24v systems. Normalized SKU: OCTAFG2012

Octopus Autopilot Drives OCTAFG3012 AutopilotsHydraulic Gear Pump - 12V - 30-40CI CylinderGear Pump Offers Industry-Leading Reliability and Performance in a Smaller, Lighter, Quieter Package.Features: High Efficiency – Industry-leading efficiency minimizes power consumption Low Noise – New industry design offers significantly quieter operation Light Weight & Compact – Small footprint offers greater installation flexibility Wide Range Of Products – From 600 to 1600cc/min, 12v and 24v options Professional Solutions for Hydraulically Steered Boats: Industry-Leading Efficiency – lower power consumption, particularly under demanding conditions requiring higher flow rates equates to a major advantage over competing units. Cost Savings – the increased efficiency and performance means the pumps can be used with smaller autopilot course computers than equivalent drive units. The smaller footprint of the compact gear pump increases installation flexibility. Lower noise and vibration make the gear pump particularly suitable for sailboat installations. Suitable for balanced or unbalanced cylinders. All models are available for both 12v and 24v systems. Normalized SKU: OCTAFG3012

  Download LiteratureOctopus Autopilot Drives OCTAFG0612 AutopilotsHydraulic Gear Pump 12V 6-9CI CylinderFrom the design team that brought you the legendary Octopus hydraulic drives, our new gear pump offers industry leading reliability and performance in a smaller, lighter, quieter package.Features: Industry leading efficiency - lower power consumption, particularly under demanding conditions requiring higher flow rates equates to a major advantage over competing units. Cost saving - the increased efficiency and performance means the pumps can be used with smaller autopilot course computers than equivalent drive units. The smaller footprint of the compact gear pump increases installation flexibility. Lower noise and vibration make the gear pump particularly suitable for sailboat installations. Suitable for balanced or unbalanced cylinders. All models available for both 12v and 24v systems. Specifications: Flow Rate: 600CC/min Voltage: 12 Volt Cylinder Range: 6-9ci CYLINDER Average Current Draw: 3.8A Operating Temperature: -15 to +75'C (5 - 167'F) Waterproofing: IP55 Ignition Protection: ISO 8846 & SAEJ1171 EMC Compliance: EN60945-9-2002 Specifications:Boat Length - Max (Feet) = NONE Capacity - Max Ram (CU) = NONE Drive Type = Hydraulic Feedback Type = NONE Pilot Type = NONE Remote Capable = NONE Turn Patterns = NONE Vessel Displacement - Max (Pounds) = NONENormalized SKU: OCTAFG0612UPC Code: 628309201586Octopus Autopilot Drives OCTAFG0612 Literature Download  Quick Reference Guide