Magnum Energy MMS1012-L-U Battery Chargers The MMS Series Inverter/Charger is a pure sine wave inverter providing a cost-effective solution for those with smaller power needs in mobile applications. Versatile, easy-to-use and lightweight, the MMS Series provides a reliable base for your energy systems. The MMS1012-GL provides convenient access with a GFCI outlet and AC input via a 3-foot cord. Battery Profile Presets: Using the ME-RC, ME-ARC, or ME-MR Remote Controls, easily choose from and set standard battery profiles, including Lithium Iron Phosphate (LFP) – only available via the ME-RC and ME-MR, Gel, Flooded, AGM1, and AGM2. Standard 20A transfer relay Low/High Battery Protection Versatile Mounting Fan Cooled Current Overload Protection Circuit breaker protection Battery Temperature Sensor Output Power 1,000W Peak Watts 1,750W Warranty 2 Years Output Voltage 120 VAC Output Current 8.3 amps Output Waveform Pure Sine Output Frequency 60 Hz Input Voltage 12 Operating Temp -20° C to +60° C (-4° F to 140° F) Efficiency 87% Weight 23 lb (10.4 kg) Dimensions 16.6” x 8.4” x 4.7” (42 cm x 21 cm x 12 cm) UL Certified Yes Phase Single Topology Low Frequency Input Battery Voltage Range 9-17 Normalized SKU: MMS1012LU

Magnum Energy MMS1012 Inverters " The MMS Series from Magnum Energy - a pure sinewave inverter providing a cost effective solution for those with smaller power needs in mobile applications. Versatile, easy-to-use, and lightweight, the MMS Series provides a reliable base for your energy system. This inverter is designed to accommodate entertainment systems and small appliances in smaller RVs and boats in an all new design. Based on the popular ME and MS Series inverters, the MMS is smaller, lighter and less expensive while retaining all the built in protection and reliability of ME and MS models. The MMS charger uses a PFC (Power Factor Corrected) charger, which is 85% efficient and the same charger topology used in all Magnum models. The MMS1012G model comes with a flexible cord on the AC input and a GFCI outlet on the output for easy connection to your AC appliances; ready to use after connecting to your batteries. All other MMS Series models are designed to be hardwired into the elctrical system and do not include the AC cord or GFCI outlet. The MMS Series is ETL Listed to the stringent requirements of UL/cUL 458, CSA C22.2 #107.1-01 and meets the KKK-A-822E standard. The MMS Series Inverter/Charger is a pure sine wave inverter providing a cost effective solution for those with smaller power needs in mobile applications. Versatile, easy-to-use, and lightweight, the MMS Series provides a reliable base for your energy system. Power Factor Corrected (PFC) Charger: The PFC charger is built into all inverter chargers. It uses less energy from a generator than a standard charger ? using 25-30% less AC current than standard chargers. Safe and reliable: The MMS Series is ETL Listed to the stringent requirements of UL/cUL 458 and CSA C22.2 #107.1-01 for mobile use. Attractive styling: The modern, hourglass case, paired with the die cast aluminum base combines form with function, creating an attractive unit that uses its base as a heat sink for superior high temperature operation. Features Standard transfer relay: The standard 20 amp transfer relay will pass AC power through the inverter when using shore or generator power. Low/high battery protection: If your battery voltage reaches below 10 VDC or above 15.5 VDC, the MMS Series will automatically shut down. Versatile mounting: Mount the MMS Series on a shelf, bulkhead, or even upside down. Fan cooled: The MMS Series is fan cooled, enabling the unit to work well in confined spaces. If the inverter doesexceed its temperature limits, it will automatically shut down and then restart when it cools down. Current overload protection: The MMS Series will automatically shut down if its output wattage is exceeded or it detects a short in the wiring, saving the unit from costly damage. Convenient switches: The MMS Series comes with an on/off front-mounted switch with an easy-to-read LED indicator. Circuit breaker protection: This model comes with built in input and output circuit breakers for ease of installation. Battery temp sensor: The standard battery temp sensor monitors temperatures from 0 - 50° C. Buy with ease: The MMS Series is backed by a two-year (24-month) parts and labor warranty. MMS Series Specifications Inverter Specifications Input battery voltage 9 to 17 VDC Nominal AC output voltage 120 VAC 5% Output frequency and accuracy 60 Hz 0.1% Total Harmonic Distortion (THD) < 5% 1 msec surge current (amps AC) 38 100 msec surge current (amps AC) 21 5 sec surge power (real watts) 1750 30 sec surge power (real watts) 1600 5 min surge power (real watts) 1200 30 min surge power (real watts) 1050 Continuous power output at 25° C 1000 VA Maximum continuous input current 133 ADC Inverter efficiency (peak) 87% Transfer time 16 msecs Search mode (typical) 5 watts No load (120 VAC output, typical) 19 watts Waveform Pure Sine Wave Charger Specifications Continuous output at 25° C 50 ADC Charger efficiency 84% Power factor > 0.95 Input current at rated output (AC amps) 7 General Features and Capabilities Transfer relay capability 20 AAC (input current for charging and pass through) Battery temperature compensation Yes, 15 ft Battery Temp Sensor standard Remote available (optional) Yes, MM-RC or ME-RC Internal cooling 0 to 59 cfm variable speed Overcurrent protection Yes, with two overlapping circuits Overtemperature protection Yes, on transformer and MOSFETS On/Off with status indicator Yes, front mounted and easily accessible Low battery cutout 10 VDC, adjustable with the ME-RC remote AC output and input Hardwire GFCI Outlet MS1012 NA - MS1012G Standard, with 3 ft cord Output circuit breaker MS1012 15 A switchable - MS1012G NA Input circuit breaker 20 AAC Listings ETL Listed to UL/cUL458, CSA C22.2 #107.1-01, meets KKK-A-1822E standard Warranty Two years Environmental Specifications Operating temperature -20° C to +60° C (-4° F to 140° F) Nonoperating temperature -40° C to +70° C (-40° F to 158° F) Operating humidity 0 to 95% RH non condensing Physical Specifications Dimensions (l x w x h) 16.6? x 8.4? x 4.7? (42 cm x 21 cm x 12 cm) Mounting Shelf (top or bottom up) or bulkhead (vents up) Weight 23 lb (10.4 kg) Max operating altitude 15,000? (4570 m) Construction ABS plastic top and cast aluminum bottom "Normalized SKU: MMS1012UPC Code: 892608001189

Magnum Energy MMS1012-G InvertersThe MMS Series from Magnum Energy - a pure sinewave inverter providing a cost effective solution for those with smaller power needs in mobile applications. Versatile, easy-to-use, and lightweight, the MMS Series provides a reliable base for your energy system. This inverter is designed to accommodate entertainment systems and small appliances in smaller RVs and boats in an all new design. Based on the popular ME and MS Series inverters, the MMS is smaller, lighter and less expensive while retaining all the built in protection and reliability of ME and MS models. The MMS charger uses a PFC (Power Factor Corrected) charger, which is 85% efficient and the same charger topology used in all Magnum models. The MMS1012G model comes with a flexible cord on the AC input and a GFCI outlet on the output for easy connection to your AC appliances; ready to use after connecting to your batteries. All other MMS Series models are designed to be hardwired into the elctrical system and do not include the AC cord or GFCI outlet. The MMS Series is ETL Listed to the stringent requirements of UL/cUL 458, CSA C22.2 #107.1-01 and meets the KKK-A-822E standard. The MMS Series Inverter/Charger is a pure sine wave inverter providing a cost effective solution for those with smaller power needs in mobile applications. Versatile, easy-to-use, and lightweight, the MMS Series provides a reliable base for your energy system. Power Factor Corrected (PFC) Charger: The PFC charger is built into all inverter chargers. It uses less energy from a generator than a standard charger ? using 25-30% less AC current than standard chargers. Safe and reliable: The MMS Series is ETL Listed to the stringent requirements of UL/cUL 458 and CSA C22.2 #107.1-01 for mobile use. Attractive styling: The modern, hourglass case, paired with the die cast aluminum base combines form with function, creating an attractive unit that uses its base as a heat sink for superior high temperature operation. Features Standard transfer relay: The standard 20 amp transfer relay will pass AC power through the inverter when using shore or generator power. Low/high battery protection: If your battery voltage reaches below 10 VDC or above 15.5 VDC, the MMS Series will automatically shut down. Versatile mounting: Mount the MMS Series on a shelf, bulkhead, or even upside down. Fan cooled: The MMS Series is fan cooled, enabling the unit to work well in confined spaces. If the inverter doesexceed its temperature limits, it will automatically shut down and then restart when it cools down. Current overload protection: The MMS Series will automatically shut down if its output wattage is exceeded or it detects a short in the wiring, saving the unit from costly damage. Convenient switches: The MMS Series comes with an on/off front-mounted switch with an easy-to-read LED indicator. Circuit breaker protection: This model comes with built in input and output circuit breakers for ease of  installation. Battery temp sensor: The standard battery temp sensor monitors temperatures from 0 - 50° C. Buy with ease: The MMS Series is backed by a two-year (24-month) parts and labor warranty. MMS Series Specifications Inverter Specifications Input battery voltage 9 to 17 VDC Nominal AC output voltage 120 VAC 5% Output frequency and accuracy 60 Hz 0.1% Total Harmonic Distortion (THD) < 5% 1 msec surge current (amps AC) 38 100 msec surge current (amps AC) 21 5 sec surge power (real watts) 1750 30 sec surge power (real watts) 1600 5 min surge power (real watts) 1200 30 min surge power (real watts) 1050 Continuous power output at 25° C 1000 VA Maximum continuous input current 133 ADC Inverter efficiency (peak) 87% Transfer time 16 msecs Search mode (typical) 5 watts No load (120 VAC output, typical) 19 watts Waveform Pure Sine Wave Charger Specifications Continuous output at 25° C 50 ADC Charger efficiency 84% Power factor > 0.95 Input current at rated output (AC amps) 7 General Features and Capabilities Transfer relay capability 20 AAC (input current for charging and pass through) Battery temperature compensation Yes, 15 ft Battery Temp Sensor standard Remote available (optional) Yes, MM-RC or ME-RC Internal cooling 0 to 59 cfm variable speed Overcurrent protection Yes, with two overlapping circuits Overtemperature protection Yes, on transformer and MOSFETS On/Off with status indicator Yes, front mounted and easily accessible Low battery cutout 10 VDC, adjustable with the ME-RC remote AC output and input Hardwire GFCI Outlet MS1012 NA - MS1012G Standard, with 3 ft cord Output circuit breaker MS1012 15 A switchable - MS1012G NA Input circuit breaker 20 AAC Listings ETL Listed to UL/cUL458, CSA C22.2 #107.1-01, meets KKK-A-1822E standard Warranty Two years Environmental Specifications Operating temperature -20° C to +60° C (-4° F to 140° F) Nonoperating temperature -40° C to +70° C (-40° F to 158° F) Operating humidity 0 to 95% RH non condensing Physical Specifications Dimensions (l x w x h) 16.6? x 8.4? x 4.7? (42 cm x 21 cm x 12 cm) Mounting Shelf (top or bottom up) or bulkhead (vents up) Weight 23 lb (10.4 kg) Max operating altitude 15,000? (4570 m) Construction ABS plastic top and cast aluminum bottomNormalized SKU: MMS1012GUPC Code: 892608001271

Magnum Energy MM1212-U Inverters 1200w 12v Inv/70a Charger. Magnum Energy 1200 Watt Inverter/70 Amp PFC Charger 12VDC Modified Sine Wave 1200 Watts Continuous Power 2400 Watts Surge Capacity 12VDC Input 70 Amp Five Stage DC Charger Ideal for RV or Marine Applications Optional Remote Control Overcurrent Protection Overtemperature Protection Two Year Warranty Replaces Magnum Energy MM1212 Normalized SKU: MM1212U

Magnum Energy MM1212 Inverters"Cost Effective Inverter/Chargers from Magnum Energy The MM Series Inverter/Charger is a modified sine wave inverter providing a cost effective solution for those with smaller power needs in mobile applications. Versatile, easy-to-use, and lightweight, the MM Series provides a reliable base for your energy system. Safe and reliable: The MM Series is ETL Listed to the stringent requirements of UL/cUL 458 and CSA C22.2 #107.1-01 for mobile use. Attractive styling: The modern, hourglass case, paired with the die cast aluminum base combines form with function, creating an attractive unit that uses its base as a heat sink for superior high temperature operation. Features: Standard transfer relay: The standard 20 amp transfer relay will pass AC power through the inverter when using grid or generator power. Versatile mounting: Mount  the MM Series on a shelf, wall, or even upside down. Fan cooled: The MM Series is fan cooled, enabling the unit to work well in confined spaces. If the inverter does exceed its temperature limits, it will automatically shut down and then restart when it cools down. Low battery protection: If your battery voltage goes below the cut-out setting the MM Series will automatically shut down, saving your batteries. High battery protection: If your battery voltage reaches over the cut-out setting the MM Series will shut down. Current overload protection: The MM Series will automatically shut down if its output wattage is exceeded or it detects a short in the wiring, saving the unit from costly damage. Convenient switches: The MM Series comes with an on/off front-mounted switch with an easy-to-read LED indicator. Circuit breaker protection: Every model comes with built in input and output circuit breakers for ease of installation. Battery temp sensor: The standard battery temp sensor monitors temperatures from 0 - 50° C. Buy with ease: The MM Series is backed by a two-year (24-month) parts and labor warranty. Specifications Inverter Specifications Input battery voltage range  9 to 15.5 VDC Nominal AC output voltage 120 VAC 5% Output frequency and accuracy  60 Hz 0.1% 1 msec surge current (amps AC) 42 100 msec surge current (amps AC) 23 5 sec surge power (real watts) 2100 10 sec surge power (real watts) 1900 30 sec surge power (real watts) 1750 5 min surge power (real watts) 1450 30 min surge power (real watts) 1375 Continuous power output at 25° C (with 1.0 PF) 1200 VA Continuous current output 10 AAC Maximum continuous input current 160 ADC Inverter efficiency 95% Transfer time 16 msecs No Load (120 VAC output) 1.3 ADC Waveform Modified Sine Wave Charger Specifications Continuous output at 25° C 70 ADC Charger efficiency 88% Power factor > 0.95 Input current at rated output (AC amps) 9 General Features and Capabilities Transfer relay capability 12 AAC Battery temperature compensation Yes Remote available (optional) Yes, MM-R or ME-RC Internal cooling 0 to 59 cfm variable speed Overcurrent protection Yes, with two overlapping circuits Overtemperature protection Yes on transformer and MOSFETS On/Off with status indicator Yes, front mounted and easily accessible Low battery cutout 10 VDC, adjustable on most models with the ME-RC remote AC output and input Hardwire Output circuit breaker 15 A switchable Input circuit breaker 16 AAC Listings ETL Listed to UL/cUL458, CSA C22.2 #107.1-01 Warranty Two years Environmental Specifications Operating temperature -20° C to +60° C (-4° F to 140° F) Nonoperating temperature -40° C to +70° C (-40° F to 158° F) Operating humidity 0 to 95% RH non condensing Physical Specifications Dimensions (l x w x h) 16.6" x 8.4" x 4.7" (42 cm x 21 cm x 12 cm) Mounting Shelf (top or bottom up) or bulkhead (vents up) Weight 20 lb (9kg) Max operating altitude 15,000' (4570 m) Construction ABS plastic top and cast aluminum bottom"Normalized SKU: MM1212UPC Code: 892608001059

Magnum Energy KISAE-SW1220 Inverters The Magnum Energy KISAE-SW1220 is a robust 2000-watt, 12V pure sine wave power inverter that converts DC battery power into clean, utility-like AC power, ideal for running sensitive electronics, appliances, and power tools in RVs, boats, trucks, and off-grid systems, featuring high surge capacity, USB ports, GFCI outlets, and safety protections. It's designed for reliability, offering silent operation and compatibility with various mobile and backup power setups, including solar.  Key Features & Protections: Clean Power Output: Produces a pure sine wave output, which is identical to utility power and safe for operating sensitive electronics, audio/video equipment, and motor loads at optimal efficiency. Monitoring: A built-in LED display continuously monitors battery status (input voltage) and load (output power), and provides warning/error codes. Safety Certifications: Safety tested and regulatory approved to cETLus (UL & CSA standards) for North America and CE standards for Europe. Built-in Protections: Includes overload shutdown, short circuit protection, over-voltage shutdown (15.5 VDC), under-voltage shutdown (10.5 VDC), and thermal protection. Cooling System: Features load or thermally-activated cooling fans for silent operation when loads are low. Installation: Compact size and wall-mountable design ideal for RVs, boats, trucks, or remote cabins.  Specs: Power Output: 2000W continuous, 4000W surge. Waveform: True/Pure Sine Wave (identical to household power). Input: 12V DC (from batteries). Output: 120V AC, 60 Hz, with US GFCI outlets. Ideal For: Laptops, TVs, medical devices, power tools, microwaves, and sensitive electronics. Built-in Protections: Low voltage, overload, and high-temperature shutdown. Convenience: Integrated 5V USB port, LED display, and remote switch compatibility. Certifications: ETLus/cETLus approved for North American safety. Applications: RVs, boats, trucks, cabins, remote homes, and solar systems.  Normalized SKU: KISAESW1220

Magnum Energy ME2012-U Battery Chargers 2000 Watt 120 VAC Inverter With 100 Amp PFC Charger 12VDC Magnum Energy 2000 Watt Inverter- 100 Amp PFC Charger 12VDC Modified Sine Wave 2000 Watts Continuous Power 4000 Watts Surge Capacity 12VDC Input Two Outputs 100 Amp Five Stage DC Charger Ideal for RV or Marine Applications Optional Remote Control Overcurrent Protection Overtemperature Protection Three Year Warranty Normalized SKU: ME2012U

Magnum Energy ME2012-20B-U Battery Chargers Magnum Energy 2000 Watt Inverter/100 Amp PFC Charger 12VDC Modified Sine Wave 2000 Watts Continuous Power 4000 Watts Surge Capacity 12VDC Input Two 20 Amp Breakered A/C Outputs 100 Amp Five Stage DC Charger Ideal for RV or Marine Applications Optional Remote Control Overcurrent Protection Overtemperature Protection Three Year Warranty Replaces Magnum Energy ME2012-20B Normalized SKU: ME201220BU

Magnum Energy MS2012-20BL Battery Chargers 2000-watt/120-VAC Inverter with 100-amp PFC Charger 12 VDC. Pure Sine Wave 2000 watts Continuous Power 4000 watts Surge Capacity 12 VDC Input 100 amp Five Stage DC Charger Ideal for RV or Marine Applications Optional Remote Control Overcurrent Protection Overtemperature Protection Two 20-amp Output Breakers Three-Year Warranty Made in the USA Replaces Magnum Energy MS2012-20B, MS2012-15BL-U, MS2012-20BL-U Normalized SKU: MS201220BL

Magnum Energy MS2012-20BL-U Battery ChargersMagnum Energy 2000w 12v Inverter/100a Charger #MS2012-20BL-UNormalized SKU: MS201220BLU

Magnum Energy MS2012-L InvertersMagnum Energy 2000w 12v Inverter/100a Charger #MS2012-LNormalized SKU: MS2012L

Magnum Energy ME2012 InvertersThe ME Series Inverter/Charger from Magnum Energy is designed specifically for rugged mobile applications. The ME Series is powerful, easy-to-use, and best of all, cost effective. It is: Safe and Reliable: The ME Series is ETL Listed to the stringent requirements of UL/cUL 458 and CSA C22.2 #107.1-01, ensuring that the inverter is safe and reliable. Easy-To-Install: Install the ME Series in four easy steps: simply connect the inverter's output to your distribution circuits or electrical panel, connect your shore power cable (AC) to the inverter's easy-to-reach terminal block, connect the batteries, and switch on the power. Features Power Factor Corrected (PFC) Charger: Our PFC charger is built into all of our inverter/chargers. It uses less energy from a generator than a standard charger – using 25-30% less AC current than standard chargers. Choices: The ME Series comes in three power models and optional built-in branch rated AC output breakers, allowing you to choose the model that is right for you. Versatile Mounting: Mount the ME Series on a shelf, bulkhead, or even upside down. Lightweight: The lightweight aluminum base and cover also provides noise reduction and corrosion resistance. Multiple Ports: The ME Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port. Accessible Design: The extra large AC access cover with terminal screw block and 360°DC connection terminals with covers make this inverter more accessible when it needs to be. Convenient Switches: The ME Series comes with an on/off inverter-mounted switch withan easy-to-read LED indicator. Expanded Transfer Relay: 60 Amp transfer service is available on all models, and can be wired in three ways, including single in / single out, single in / dual out, or dual in / dual out. Buy with ease: The ME Series is backed by a three-year (36-month) limited warranty.Normalized SKU: ME2012UPC Code: 892608001028

Magnum Energy MS2000-20B Inverters " The MS Series Inverter/Charger from Magnum Energy is a pure sine wave inverter designed specifically for the most demanding mobile and off-grid applications. The MS Series is powerful, easy-to-use, and best of all, cost-effective. Power Factor Corrected (PFC) Charger: Our PFC charger is built into all of our inverter chargers. It uses less energy from a generator than a standard charger using 25-30% less AC than standard chargers. Safe and reliable: The MS2000, MS2012, MS2812, and MS4024 are ETL Listed to the stringent requirements of UL/cUL 458 for mobile use, and the MS2012, MS2812, and MS4024 are ETL Listed UL 1741 and CSA C22.2 #107.1-01 for renewable energy installations. All models also meet KKK-A-1822E standards for emergency vehicle use. Easy-to-install:  Install the MS Series in four easy steps: simply connect the inverter's output to your distribution circuits or electrical panel, connect your utility power cable to the inverter's easy-to-reach terminal block, connect the batteries, and switch on the power Features: Pure sine wave: Power your T.V.s, stereos, plasma screens, and other sensitive electronics without worry. The pure sine wave inverter and power factor corrected charger provide clean, reliable inverter power with low total harmonic distortion (THD) of less than 5%. Choices: The MS Series comes in 12 and 24-volt configurations, allowing you to choose the model that is right for you. Versatile mounting: Mount the MS Series on a shelf, bulkhead, or even upside down. Lightweight: The lightweight aluminum base and cover also provide noise reduction and corrosion resistance. Multiple ports: The MS Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port. Accessible design: The extra large AC access cover with terminal screw block and 360° DC connection terminals with covers make this inverter more accessible when it needs to be. Convenient switches: The MS Series comes with an on/off inverter-mounted switch with an easy-to-read LED indicator. Expanded transfer relay: 60 Amp transfer service is available on all models. Buy with ease: The MS Series is backed by a three-year (36-month) limited warranty Magnum Energy 2000 Watt Inverter/100 Amp PFC Charger/2-20A 12VDC True Sine Wave 2000 Watts Continuous Power 4000 Watts Surge Capacity 12VDC Input Two 20 Amp Breakered A/C Outputs 100 Amp Five Stage DC Charger Ideal for RV or Marine Applications Optional Remote Control Overcurrent Protection Overtemperature Protection Three Year Warranty Replaces Magnum Energy MS2000-20B Specification MS2000 MS2012 MS2812 MS4024 Input battery voltage range 9 -17 VDC 9 - 17 VDC 9 - 17 VDC 18 - 34 VDC Nominal AC output voltage 120 VAC 120 VAC 120 VAC 120 VAC Output frequency and accuracy 60 Hz ± 0.04% 60 Hz ± 0.04% 60 Hz ± 0.04% 60 Hz ± 0.04% Total harmonic distortion (THD) <5% <5% <5% <5% 1 msec surge current (amps AC) 50 50 70 120 100 msec surge current (amps AC) 33 33 40 72 5 sec surge power (real watts) 3300 3300 3900 5800 30 sec surge power (real watts) 3100 3100 3800 5400 5 minute surge power (real watts) 2800 2800 3200 4900 30 minute surge power (real watts) 2200 2200 3000 4500 Continuous power output at 25° C 2000 VA 2000 VA 2800 VA 4000 VA Rated input battery current 225 ADC 225 ADC 267 ADC 204 ADC Inverter efficiency 89% 89% 88% 87% Transfer Time 16 msecs 16 msecs 16 msecs 16 msecs Search Mode (typical) 5 watts 7 watts 7 watts 7 watts no Load (120 VAc output, typical) 25 watts 25 watts 30 watts 25 watts Wave Form Pure Sine Wave Pure Sine Wave Pure Sine Wave Pure Sine Wave Charger Specifications Continuous output at 25° C 100 ADC 100 ADC 125 ADC 105 ADC Charger efficiency 85% 85% 85% 85% Power factor >.95 >.95 >.95 >.95 Input current at rated output (AC amps) 15 15 18 29 General Features and Capabilities Transfer relay capability MS2000: 30 A single inputMS2012, MS2812, MS4024: 2 legs at 30 A for 120 V/30 A or 240 V/60 A service Five stage charging capability Bulk, Absorb, Float, Equalize (requires remote), and Battery Saver™ Battery temperature compensation Yes, 15 ft Battery Temp Sensor standard Remote available (optional) Yes, MM-RC or ME-RC Internal cooling 0 to 120 cfm variable speed drive using dual 92mm brushless DC fans Over current protection Yes, with overlapping circuits Over temperature protection yes on transformer, MOSFETS, and battery Conformal coating on PCBs for corrosion protection Yes Powder-coated chassis & top for corrosion protection Yes Stainless steel fasteners for corrosion protection Yes Dual AC branch-rated output breakers 20A on MS2000-20B Listings ETL Listed to UL/cUL 458, UL 1741, CSA C22.2 #107.1-01, meets KKK-A-1822E standard Warranty 3 Years Environmental Specifications Operating temperatures -20° C to +60° C (-4° F to 140° F) Non-operating temperature -40° C to +70° C (-40° F to 158° F) Operating Humidity 0 to 95% RH non-condensing Physical specifications Dimensions (l x w x h) 13.75? x 12.65? x 8.0? (34.9 cm x 32.1 cm x 20.3 cm) Mounting Shelf (top or bottom-up) or bulkhead (vents up) Weight 40 lb 42 lb 55 lb 55 lb "Normalized SKU: MS200020B

Magnum Energy MS2000 Inverters"The MS Series Inverter/Charger from Magnum Energy ? a pure sine wave inverter designed specifically for the most demanding mobile and off grid applications. The MS Series is powerful, easy-to-use, and best of all, cost effective. Power Factor Corrected (PFC) Charger: Our PFC charger is built into all of our inverter chargers. It uses less energy from a generator than a standard charger ? using 25-30% less AC current than standard chargers. Safe and reliable: The MS2000, MS2012, MS2812, and MS4024 are ETL Listed to the stringent requirements of UL/cUL 458 for mobile use and the MS2012, MS2812, and MS4024 are ETL Listed UL 1741 and CSA C22.2 #107.1-01 for renewable energy installations. All models also meet KKK-A-1822E standards for emergency vehicle use. Easy-to-install: Install the MS Series in four easy steps: simply connect the inverter?s output to your distribution circuits or electrical panel, connect your utility power cable to the inverter?s easy-to-reach terminal block, connect the batteries, and switch on the power Features: Pure sine wave: Power your T.V.s, stereos, plasma screens, and other sensitive electronics without worry. The pure sine wave inverter and power factor corrected charger provide clean, reliable inverter power with low total harmonic distortion (THD) of less than 5%. Choices: The MS Series comes in 12 and 24 volt configurations, allowing you to choose the model that is right for you. Versatile mounting: Mount the MS Series on a shelf, bulkhead, or even upside down. Lightweight: The lightweight aluminum base and cover also provides noise reduction and corrosion resistance. Multiple ports: The MS Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port. Accessible design: The extra large AC access cover with terminal screw block and 360° DC connection terminals with covers make this inverter more accessible when it needs to be. Convenient switches: The MS Series comes with an on/off inverter-mounted switch with an easy-to-read LED indicator. Expanded transfer relay: 60 Amp transfer service is available on all models. Buy with ease: The MS Series is backed by a three-year (36-month) limited warranty Specification MS2000 MS2012 MS2812 MS4024 Input battery voltage range 9 -17 VDC 9 - 17 VDC 9 - 17 VDC 18 - 34 VDC Nominal AC output voltage 120 VAC 120 VAC 120 VAC 120 VAC Outpput frequency and accuracy 60 Hz ± 0.04% 60 Hz ± 0.04% 60 Hz ± 0.04% 60 Hz ± 0.04% Tptal harmonic distortion (THD) <5% <5% <5% <5% 1 msec surge current (amps AC) 50 50 70 120 100 msec surge current (amps AC) 33 33 40 72 5 sec surge power (real watts) 3300 3300 3900 5800 30 sec surge power (real watts) 3100 3100 3800 5400 5 minute surge power (real watts) 2800 2800 3200 4900 30 minute surge power (real watts) 2200 2200 3000 4500 Continuous power output at 25° C 2000 VA 2000 VA 2800 VA 4000 VA Rated input battery current 225 ADC 225 ADC 267 ADC 204 ADC Inverter efficiency 89% 89% 88% 87% Transfer Time 16 msecs 16 msecs 16 msecs 16 msecs Search Mode (typical) 5 watts 7 watts 7 watts 7 watts no Load (120 VAc output, typical) 25 watts 25 watts 30 watts 25 watts Wave Form Pure Sine Wave Pure Sine Wave Pure Sine Wave Pure Sine Wave Charger Specifications Continuous output at 25° C 100 ADC 100 ADC 125 ADC 105 ADC Charger efficiency 85% 85% 85% 85% Power factor >.95 >.95 >.95 >.95 Input current at rated output (AC amps) 15 15 18 29 General Features and Capabilities Transfer relay capability MS2000: 30 A single input MS2012, MS2812, MS4024: 2 legs at 30 A for 120 V/30 A or 240 V/60 A service Five stage charging capability Bulk, Absorb, Float, Equalize (requires remote), and Battery Saver™ Battery temperature compensation Yes, 15 ft Battery Temp Sensor standard Remote available (optional) Yes, MM-RC or ME-RC Internal cooling 0 to 120 cfm variable speed drive using dual 92mm brushless DC fans Over current protection Yes, with overlapping circuits Over temperature protection yes on transformer,MOSFETS, and battery Conformal coating on PCB?s for corrosion protection Yes Powder coated chassis & top for corrosion protection Yes Stainless steel fasteners for corrosion protection Yes Dual AC branch rated output breakers 20A on MS2000-20B Listings ETL Listed to UL/cUL 458, UL 1741, CSA C22.2 #107.1-01, meets KKK-A-1822E standard Warranty 3 Years Enviromental Specifications Operating temperatures -20° C to +60° C (-4° F to 140° F) Non-operating temperature -40° C to +70° C (-40° F to 158° F) Operating Humidity 0 to 95% RH non condensing Physical specifications Dimensions (l x w x h) 13.75? x 12.65? x 8.0? (34.9 cm x 32.1 cm x 20.3 cm) Mounting Shelf (top or bottom up) or bulkhead (vents up) Weight 40 lb 42 lb 55 lb 55 lb "Normalized SKU: MS2000UPC Code: 892608001172

Magnum Energy MS2012 Inverters Pure sine wave inverters Designed specifically for the most demanding mobile and off grid applications AE series is 120/240V E series is 230VAC/50Hz/li>Normalized SKU: MS2012UPC Code: 892608001097

Magnum Energy ME2012-20B InvertersThe ME Series Inverter/Charger from Magnum Energy is designed specifically for rugged mobile applications. The ME Series is powerful, easy-to-use, and best of all, cost effective. It is: Safe and Reliable: The ME Series is ETL Listed to the stringent requirements of UL/cUL 458 and CSA C22.2 #107.1-01, ensuring that the inverter is safe and reliable. Easy-To-Install: Install the ME Series in four easy steps: simply connect the inverter's output to your distribution circuits or electrical panel, connect your shore power cable (AC) to the inverter's easy-to-reach terminal block, connect the batteries, and switch on the power. Features Power Factor Corrected (PFC) Charger: Our PFC charger is built into all of our inverter/chargers. It uses less energy from a generator than a standard charger – using 25-30% less AC current than standard chargers. Choices: The ME Series comes in three power models and optional built-in branch rated AC output breakers, allowing you to choose the model that is right for you. Versatile Mounting: Mount the ME Series on a shelf, bulkhead, or even upside down. Lightweight: The lightweight aluminum base and cover also provides noise reduction and corrosion resistance. Multiple Ports: The ME Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port. Accessible Design: The extra large AC access cover with terminal screw block and 360°DC connection terminals with covers make this inverter more accessible when it needs to be. Convenient Switches: The ME Series comes with an on/off inverter-mounted switch withan easy-to-read LED indicator. Expanded Transfer Relay: 60 Amp transfer service is available on all models, and can be wired in three ways, including single in / single out, single in / dual out, or dual in / dual out. Buy with ease: The ME Series is backed by a three-year (36-month) limited warranty.Normalized SKU: ME201220BUPC Code: 892608001066

Magnum Energy ME2512-U Battery Chargers 2500 Watt 120 VAC Inverter With 130 Amp PFC Charger 12VDC Magnum Energy 2500 watt Inverter/130 Amp PFC Charger 12VDC Modified Sine Wave 2500 Watts Continuous Power 5000 Watts Surge Capacity 12VDC Input 130 Amp Five Stage DC Charger Ideal for RV or Marine Applications Optional Remote Control Overcurrent Protection Overtemperature Protection Three Year Warranty Replaces Magnum Energy ME2512 Normalized SKU: ME2512U

Magnum Energy ME2512 InvertersThe ME Series Inverter/Charger from Magnum Energy is designed specifically for rugged mobile applications. The ME Series is powerful, easy-to-use, and best of all, cost effective. It is: Safe and Reliable: The ME Series is ETL Listed to the stringent requirements of UL/cUL 458 and CSA C22.2 #107.1-01, ensuring that the inverter is safe and reliable. Easy-To-Install: Install the ME Series in four easy steps: simply connect the inverter's output to your distribution circuits or electrical panel, connect your shore power cable (AC) to the inverter's easy-to-reach terminal block, connect the batteries, and switch on the power. Features Power Factor Corrected (PFC) Charger: Our PFC charger is built into all of our inverter/chargers. It uses less energy from a generator than a standard charger ? using 25-30% less AC current than standard chargers. Choices: The ME Series comes in three power models and optional built-in branch rated AC output breakers, allowing you to choose the model that is right for you. Versatile Mounting: Mount the ME Series on a shelf, bulkhead, or even upside down. Lightweight: The lightweight aluminum base and cover also provides noise reduction and corrosion resistance. Multiple Ports: The ME Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port. Accessible Design: The extra large AC access cover with terminal screw block and 360°DC connection terminals with covers make this inverter more accessible when it needs to be. Convenient Switches: The ME Series comes with an on/off inverter-mounted switch withan easy-to-read LED indicator. Expanded Transfer Relay: 60 Amp transfer service is available on all models, and can be wired in three ways, including single in / single out, single in / dual out, or dual in / dual out. Buy with ease: The ME Series is backed by a three-year (36-month) limited warranty.Normalized SKU: ME2512UPC Code: 892608001073