Flow-Rite Controls MV-11-FN01 Aerator AccessoriesThe V1 valve provides remote drain control and eliminates the need for drain plugs and standpipes. A short 60° cable throw provides more support, strength, and smoothness than long 90° throws used with conventional valves. Features dual seals for positive shut-off in the "CLOSED" position and a straight unrestricted flow path in the "OPEN" position. This valve is non-directional. The Qwik-Lok version features O-ring seals for use with Qwik-Lok quick connect sockets (MA-014). Qwik-Lok enables the valve or complete valve pump assembly to be removed for service with two fingers. No tools are required. Operates with the MC-1-01-100 actuator. Provides remote drain control and eliminates the need for drain plugs and standpipes A short 60° cable throw provides more support, strength, and smoothness than long 90° throws used with conventional valves Features dual seals for positive shut-off in the "CLOSED" position Features straight unrestricted flow path in the "OPEN" position The V1 valve is unidirectional and, although the ports are marked “TRANSOM” and “LIVEWELL”, they can be installed in either position Normalized SKU: MV11FN01UPC Code: 140086

Flow-Rite Controls MV-01-FN01 Aerator AccessoriesThe V1 valve provides remote drain control and eliminates the need for drain plugs and standpipes. A short 60° cable throw provides more support, strength, and smoothness than long 90° throws used with conventional valves. Features dual seals for positive shut-off in the "CLOSED" position and a straight unrestricted flow path in the "OPEN" position. This valve is non-directional. The barbed version includes a hose clamp and molded bump. Operates with the MC-1-01-100 actuator. Provides remote drain control and eliminates the need for drain plugs and standpipes A short 60° cable throw provides more support, strength, and smoothness than long 90° throws used with conventional valves Features dual seals for positive shut-off in the "CLOSED" position Features straight unrestricted flow path in the "OPEN" position The V1 valve is unidirectional and, although the ports are marked “TRANSOM” and “LIVEWELL”, they can be installed in either position Normalized SKU: MV01FN01UPC Code: 140079

Flow-Rite Controls MV-03-FN01 Aerator AccessoriesLike the V2, the V3 is a reversible check valve that allows a single pump to not only perform the basic livewell functions necessary to keep your catch alive, but does it in a passive or automatic manner. It also has a third closed “RECIRC” position. By mounting the pump to the valve body, the operator only has to decide whether he wants his livewell functioning or empty. When the first fish is caught, place the valve in the “AUTO” position and turn on the pump. When the boat is off plane the pump will recirculate and aerate the livewell water and simultaneously blend in a portion of fresh lake water. Used livewell water is expelled out the overflow as fresh water enters to prevent any ammonia build up. When the boat is put on plane, the valve’s check flapper will prevent water loss out the drain, and allow the pump to continue its recirculation duties. Any water lost out the overflow while running on plane is automatically made up when the boat is brought off plane at the next fishing location. All this is accomplished without any operator assistance. For those times when outside water is not wanted or available, such as, adding ice, livewell additives, going through locks, traveling to out of water weigh-ins, dockside refueling or using our optional Pump-out / Venturi Aerator, place the valve in the “RECIRC” position. To empty, simply turn off the pump and move the valve to the “EMPTY” position for gravity draining. The barbed version includes a hose clamp and molded bump. The V3 valve has two cable approach options. The cable can approach the valve from either the front/livewell or the rear/transom side of the boat. Ideally used in bassboats, flat boats, and other low profile boats for automatic drain control and livewell management Accepts mounting of one standard aerator pump for both filling and recirculation Includes closed recirculation mode which allows addition of optional pump-out system Provides RECIRC / EMPTY / AUTO modes; Operates with the MC-1-03-100 actuator Cable approach from the front/livewell side of the boat Normalized SKU: MV03FN01UPC Code: 140082

Flow-Rite Controls MV-04-RN01 Aerator AccessoriesThe V4 valve allows a standard aerator pump to be mounted directly to the valve body for both filling and recirculation duties, thus eliminating the need for 2 separate pumps and additional plumbing. When in the “FILL” position, the valve will close the livewell drain side of the valve so the pump has free access to fresh outside water. Once the livewell is full, the valve is placed in the “RECIRC” position to close the drain and allow full recirculation of the livewell water. Occasionally returning to the “FILL” position will keep the livewell topped off and freshened. The “EMPTY” position allows gravity draining with the pump off. Any additional fill or recirculation pump is optional and only becomes a true back-up to the main system pump. Once the system is put into the “AUTO” position and the pump turned on, all livewell functions are handled so the angler can concentrate on fishing. The barbed version includes a hose clamp and molded bump. The V4 valve has two cable approach options. The cable can approach the valve from either the front/livewell or the rear/transom side of the boat. Ideally used in bassboats, flat boats, and other low profile boats for automatic drain control and livewell management Accepts mounting of one standard aerator pump for both filling and recirculation Includes closed recirculation mode which allows addition of optional pump-out system Provides FILL / EMPTY / RECIRC modes; Operates with the MC-1-04-100 actuator Cable approach from the rear/transom side of the boat Normalized SKU: MV04RN01UPC Code: 140085

Flow-Rite Controls MB-003 Live Well Accessories Flow-Rite’s 3/4” Bilge Bundle features a 1000 GPH pump for removing water from your bilge area. This comprehensive bundle takes the guesswork out of water removal and provides worry-free operation. Includes: Bilge pump, Johnson, 1000GPH 3/4" Thru-hull, elbow Two 3/4" Qwik-Lok sockets, straight 6' of 3/4" hose with hose clamps Normalized SKU: MB003

Flow-Rite Controls MA-021 FittingsFits Attwood pump intake and outlet threads. Fits most pump inlets for remote mounting of pump. Will also fit Johnson Pump outlet when an extra gasket is used. Features a 3/4" diameter male end by 3/4" diameter NSPF end. The overall dimensions are 2-1/8" length by 1-3/8" width. Fits Attwood pump intake and outlet threads Fits most pump inlets for remote mounting of pump Will also fit Johnson Pump outlet when an extra gasket is used Features a 3/4" diameter male end by 3/4" diameter NSPF end Overall Dimensions: 2-1/8" length by 1-3/8" width Normalized SKU: MA021UPC Code: 140111

Flow-Rite Controls MA-CBL-12 Aerator AccessoriesControl cables are available in lengths from 6' to 17' in one foot increments. Each cable includes the brass attachment nut and quick disconnect locking retainer for attachment to the actuator. Features a stainless steel control wire for fresh or salt water use. Available in lengths from 6' to 17' in one foot increments Each cable includes the brass attachment nut and quick disconnect locking retainer Attaches to the actuator Features a stainless steel control wire for fresh or salt water use Cable Length: 12' Flow-Rite Controls Actuator Control Cable - 12' #C12Normalized SKU: MACBL12UPC Code: 140089

Flow-Rite Controls RK3-BW Aerator AccessoriesSystem 3 Recirculate/Empty/Automatic Livewell Actuator for use with V3 series valves. Requires two MD-093 screws for installation, not included. Control your livewell with just the flip of a switch! Recirculate/Empty/Automatic switch For use with V3 series valves Requires two MD-093 screws, not included Control your livewell with just the flip of a switch Actuator Color: Black/White Normalized SKU: RK3BWUPC Code: 140097

Flow-Rite Controls MC-1-04-100 Aerator AccessoriesSystem 4 Fill/Empty/Recirculate Livewell Actuator for use with V4 series valves. Requires two MD-093 screws for installation, not included. Control your livewell with just the flip of a switch! Fill/Empty/Recirculate switch For use with V4 series valves Requires two MD-093 screws, not included Control your livewell with just the flip of a switch Actuator Color: Black/White Normalized SKU: MC104100UPC Code: 140099

Flow-Rite Controls MA-029 Fittings Qwik-Lok is a quick connect marine plumbing system and method that can provide increased productivity, higher quality, and value, while simultaneously reducing costs. Qwik-Lok fittings are installed in place of standard barbed fittings. Zero learning curve required. Adapter-3/4" Qwik-Lok 3/4 Male NPTNormalized SKU: MA029

Flow-Rite Controls MA-CBL-06 Aerator Accessories Control cables are available in lengths from 6' to 17' in one-foot increments. Each cable includes the brass attachment nut and quick-disconnect locking retainer for attachment to the actuator. Features a stainless steel control wire for fresh or salt water use. Available in lengths from 6' to 17' in one-foot increments Each cable includes the brass attachment nut and quick-disconnect locking retainer Attaches to the actuator Features a stainless steel control wire for fresh or salt water use Cable Length: 6' Normalized SKU: MACBL06UPC Code: 140087