Ice Eater P250.100 Ice Eaters The Ice Eater P250.100 is a 0.25 HP, 115V de-icing unit with a 100-foot power cord. It runs on standard 115V shore power and gives you a solid 100 feet of reach from the outlet to the water, covering most single-slip setups without needing an extension cord or any rewiring at the dock. The P250 works by circulating water rather than heating it. A propeller draws warmer water up from below the surface and moves it outward along the waterline, preventing ice from forming around your hull, dock pilings, and boat lift components. The 0.25 HP motor is the right size for smaller, more sheltered slips where consistent ice prevention is the goal and the conditions do not demand the heavier output of the P500 series. The motor is totally enclosed and thermally protected for continuous unattended outdoor operation. The UV-stabilized polyethylene housing handles sun exposure, salt air, and freeze-thaw cycling without cracking or fading. A stainless steel hanging bracket and propeller guard are included, so the unit is ready to hang right out of the box. Motor: 0.25 HP, 115V, 60 Hz, single-phase Cord length: 100 feet Motor housing: UV-stabilized polyethylene Includes: motor, 100-foot power cord, stainless steel hanging bracket, and propeller guard Rated for continuous duty operation Thermally protected motor The 100-foot cord on 115V is a versatile fit for docks where the outlet is set back from the slip but not at the far end of a long run. The P250 is also available in 25-foot and 150-foot cord lengths on 115V, and in 230V configurations if your dock pedestal runs higher voltage. For larger slips or more exposed locations, the 0.5 HP P500 series handles heavier ice conditions. Normalized SKU: P250100

Ice Eater P250.150 Ice Eaters The Ice Eater P250.150 is a 0.25 HP, 115V de-icing unit with a 150-foot power cord. It runs on standard 115V shore power and gives you 150 feet of reach from the outlet to the water, which covers most single-slip dock setups without needing an extension cord or additional wiring. The P250 keeps ice at bay through water circulation. A propeller draws warmer water up from below the surface and pushes it outward along the waterline, disrupting ice formation around your hull, dock pilings, and boat lift structure. The 0.25 HP motor is sized for smaller, more protected slips where you need reliable ice prevention without the output of the larger P500 series. The motor is totally enclosed and thermally protected for continuous unattended outdoor operation. The UV-stabilized polyethylene housing holds up to sun, salt air, and freeze-thaw cycling without cracking or fading. A stainless steel hanging bracket and propeller guard are included, so the unit is ready to hang straight out of the box. Motor: 0.25 HP, 115V, 60 Hz, single-phase Cord length: 150 feet Motor housing: UV-stabilized polyethylene Includes: motor, 150-foot power cord, stainless steel hanging bracket, and propeller guard Rated for continuous duty operation Thermally protected motor The 150-foot cord on 115V service is a practical choice for docks where the nearest standard outlet is set back from the water. If your dock runs 230V pedestals, the P250 is also available in 230V configurations with matching cord length options. For larger slips or more exposed locations with heavier ice conditions, the 0.5 HP P500 series is the step up. Normalized SKU: P250150

Ice Eater P250.025 Ice Eaters The Ice Eater P250.025 is a 0.25 HP, 115V de-icing unit with a 25-foot power cord. It is the shortest cord option in the 115V P250 lineup, designed for dock setups where a standard outlet is mounted right at the slip and you just need enough cord to drop the unit into the water. Clean install, minimal cord management, and ready to run all winter. The P250 works by circulating water rather than heating it. A propeller draws warmer water up from below the surface and pushes it outward along the waterline, preventing ice from forming around your hull, dock pilings, and boat lift structure. The 0.25 HP motor is sized for smaller, more sheltered slips where consistent ice prevention is the goal without the output of the larger P500 series. The motor is totally enclosed and thermally protected for continuous unattended outdoor operation. The UV-stabilized polyethylene housing handles sun exposure, salt air, and freeze-thaw cycling without cracking or fading. A stainless steel hanging bracket and propeller guard are included, so the unit is ready to hang straight out of the box. Motor: 0.25 HP, 115V, 60 Hz, single-phase Cord length: 25 feet Motor housing: UV-stabilized polyethylene Includes: motor, 25-foot power cord, stainless steel hanging bracket, and propeller guard Rated for continuous duty operation Thermally protected motor The 25-foot cord is the right pick when your 115V outlet is already on the dock structure and the slip is compact. If you need more reach on 115V, the P250 is also available in 50-foot and 100-foot cord lengths. The P250 is also offered in 230V configurations for docks running higher voltage pedestals. For larger slips or more exposed locations, the 0.5 HP P500 series handles heavier ice conditions. Normalized SKU: P250025

Ice Eater P250.050 Ice Eaters The Ice Eater P250.050 is a 0.25 HP, 115V de-icing unit with a 50-foot power cord. It runs on standard 115V shore power and is sized for compact dock setups where the outlet is reasonably close to the water. Fifty feet is enough cord to reach most single slips from a dock-mounted outlet without any extra cable piling up on the dock. The P250 keeps ice from forming through water circulation rather than heat. A propeller draws warmer water up from below the surface and pushes it outward along the waterline, disrupting ice formation around your hull, pilings, and boat lift structure. The 0.25 HP motor is the right fit for smaller, more sheltered slips where steady ice prevention is the goal without the output of the larger P500 series. The motor is totally enclosed and thermally protected for continuous unattended outdoor operation. The UV-stabilized polyethylene housing resists sun degradation, salt air, and freeze-thaw cycling without cracking or fading. A stainless steel hanging bracket and propeller guard are included, so the unit is ready to hang straight out of the box. Motor: 0.25 HP, 115V, 60 Hz, single-phase Cord length: 50 feet Motor housing: UV-stabilized polyethylene Includes: motor, 50-foot power cord, stainless steel hanging bracket, and propeller guard Rated for continuous duty operation Thermally protected motor The 50-foot cord sits between the 25-foot and 100-foot options in the 115V P250 range, making it a good middle ground for slips where the outlet is close but not right at the water's edge. If your dock runs 230V pedestals, the P250 is also available in matching 230V configurations. For larger slips or more exposed locations with heavier ice pressure, the 0.5 HP P500 series is the next step up. Normalized SKU: P250050

Ice Eater P250.100.615 Ice Eaters The Ice Eater P250.100.615 is a 0.25 HP, 230V de-icing unit with a 100-foot power cord. It is a practical mid-range option in the P250 lineup for docks running 230V service, giving you enough cord to reach most standard slip configurations from a pedestal without going to a longer cord than you actually need. The P250 prevents ice formation through water circulation rather than heat. A propeller draws warmer water up from below the surface and pushes it outward along the waterline, keeping ice from taking hold around your hull, pilings, and dock structure. The 0.25 HP motor is sized for smaller, more sheltered slips where steady ice prevention matters but the conditions do not call for the heavier output of the P500 series. The motor is totally enclosed and thermally protected for continuous unattended outdoor operation. The UV-stabilized polyethylene housing resists sun degradation, salt air, and freeze-thaw cycling without cracking or fading. A stainless steel hanging bracket and propeller guard are included, so the unit is ready to hang right out of the box. Motor: 0.25 HP, 230V, 60 Hz, single-phase Cord length: 100 feet Motor housing: UV-stabilized polyethylene Includes: motor, 100-foot power cord, stainless steel hanging bracket, and propeller guard Rated for continuous duty operation Thermally protected motor The 100-foot cord on 230V covers most mid-length dock runs where the pedestal is set back from the slip but not at the far end of a long dock. The P250 is also available in 25-foot, 50-foot, 150-foot, and 200-foot cord lengths for 230V installations, and in 115V configurations if your dock runs standard shore power. For larger slips or heavier ice exposure, the 0.5 HP P500 series is the next step up. Normalized SKU: P250100615

Ice Eater P250.150.615 Ice Eaters The Ice Eater P250.150.615 is a 0.25 HP, 230V de-icing unit with a 150-foot power cord. It sits in the middle of the P250 cord length range, giving you a solid reach from a 230V pedestal to the water without going all the way to the 200-foot option. A good fit for single slips, boat lifts, and smaller dock sections on 230V service where the power source is a moderate distance from the slip. The P250 uses the same propeller-driven circulation approach as the rest of the Ice Eater lineup. Warmer water from below the surface gets pulled up and pushed outward along the waterline, keeping ice from forming around your hull, dock pilings, and structure. No heating element in the design means lower operating costs and nothing to burn out over a long winter. The motor is totally enclosed and thermally protected for continuous unattended outdoor use. The UV-stabilized polyethylene housing handles sun exposure, salt air, and repeated freeze-thaw cycles without cracking or fading. A stainless steel hanging bracket and propeller guard are included, so the unit is ready to hang right out of the box. Motor: 0.25 HP, 230V, 60 Hz, single-phase Cord length: 150 feet Motor housing: UV-stabilized polyethylene Includes: motor, 150-foot power cord, stainless steel hanging bracket, and propeller guard Rated for continuous duty operation Thermally protected motor The 150-foot cord covers most mid-range dock runs on 230V service. If your power source is closer to the water, the P250 is also available with 25-foot, 50-foot, and 100-foot cords. For larger slips or more exposed locations, the 0.5 HP P500 series handles heavier ice conditions. Normalized SKU: P250150615

Ice Eater P250.200.615 Ice Eaters The Ice Eater P250.200.615 is a 0.25 HP, 230V de-icing unit with a 200-foot power cord. The P250 is the lighter-duty model in the Ice Eater lineup, sized for smaller slips, single boat lifts, and situations where you need ice protection but do not need the full output of the 0.5 HP P500 series. The 200-foot cord gives you a long reach from the power source to the water, making it a practical choice for docks where the 230V pedestal is set well back from the slip. Like the rest of the Ice Eater line, the P250 works through water circulation rather than heat. A propeller draws warmer water up from below the surface and moves it outward along the waterline, preventing ice from forming around your hull, pilings, and dock structure. No heating element means no element burnout and lower operating costs through the winter months. The motor is totally enclosed and thermally protected for continuous unattended outdoor operation. The housing is UV-stabilized polyethylene that holds up to sun, salt air, and freeze-thaw cycling season after season. A stainless steel hanging bracket and propeller guard are included in the box. Motor: 0.25 HP, 230V, 60 Hz, single-phase Cord length: 200 feet Motor housing: UV-stabilized polyethylene Includes: motor, 200-foot power cord, stainless steel hanging bracket, and propeller guard Rated for continuous duty operation Thermally protected motor The P250 is a good fit for smaller protected slips where ice pressure is a concern but the exposure level does not call for a larger unit. If you are dealing with a more exposed location, heavy current, or a larger slip, the 0.5 HP P500 series handles those conditions better. The 200-foot cord on this model covers long dock runs where the power source is far from the water. Normalized SKU: P250200615

Ice Eater P250.025.615 Ice Eaters The Ice Eater P250.025.615 is a 0.25 HP, 230V de-icing unit with a 25-foot power cord. It is the shortest cord option in the P250 230V lineup, built for installations where the 230V pedestal or outlet is mounted directly on the dock structure and the slip is right there. No excess cord, no tangles, just a clean hang and done. The P250 prevents ice formation through water circulation rather than heat. A propeller draws warmer water up from below the surface and pushes it outward along the waterline, keeping ice from forming around your hull, dock pilings, and boat lift components. The 0.25 HP motor is sized for smaller, more sheltered slips where consistent ice prevention matters and the conditions do not call for the heavier output of the P500 series. The motor is totally enclosed and thermally protected for continuous unattended outdoor operation. The UV-stabilized polyethylene housing handles sun exposure, salt air, and freeze-thaw cycling without cracking or fading. A stainless steel hanging bracket and propeller guard are included, so the unit is ready to hang right out of the box. Motor: 0.25 HP, 230V, 60 Hz, single-phase Cord length: 25 feet Motor housing: UV-stabilized polyethylene Includes: motor, 25-foot power cord, stainless steel hanging bracket, and propeller guard Rated for continuous duty operation Thermally protected motor The 25-foot cord is the right call when your 230V outlet is already at the dock edge and you want the cleanest possible install. If you need more reach, the P250 is also available in 50-foot, 100-foot, 150-foot, and 200-foot cord lengths on 230V, and in 115V configurations for standard shore power setups. For larger slips or heavier ice exposure, the 0.5 HP P500 series handles those conditions. Normalized SKU: P250025615

Ice Eater P250.050.615 Ice Eaters The Ice Eater P250.050.615 is a 0.25 HP, 230V de-icing unit with a 50-foot power cord. It is a clean fit for compact dock setups on 230V service where the pedestal is close to the slip and a shorter cord keeps the install tidy. No extra cord to coil up, no cable management headaches through the winter. The P250 prevents ice formation through water circulation. A propeller draws warmer water up from below the surface and pushes it outward along the waterline, keeping ice from forming around your hull, pilings, and dock structure. The 0.25 HP motor is sized for smaller, more sheltered slips where reliable ice prevention is the priority and the exposure level does not call for the heavier output of the P500 series. The motor is totally enclosed and thermally protected for continuous unattended outdoor operation. The UV-stabilized polyethylene housing holds up to sun, salt air, and freeze-thaw cycling without cracking or fading. A stainless steel hanging bracket and propeller guard are included, so the unit is ready to hang straight out of the box. Motor: 0.25 HP, 230V, 60 Hz, single-phase Cord length: 50 feet Motor housing: UV-stabilized polyethylene Includes: motor, 50-foot power cord, stainless steel hanging bracket, and propeller guard Rated for continuous duty operation Thermally protected motor The 50-foot cord is the middle option in the shorter end of the P250 230V range. If your power source is right at the dock edge, the 25-foot cord keeps things even cleaner. If you need more reach, the P250 is also available in 100-foot, 150-foot, and 200-foot cord lengths on 230V. For larger slips or heavier ice conditions, the 0.5 HP P500 series is the step up. Normalized SKU: P250050615

Ice Eater P500.100 Ice Eaters The Ice Eater P500.100 is a 0.5 HP, 115V de-icing unit that runs on standard household current and comes with a 100-foot power cord. It is a solid fit for single slips, boat lifts, and smaller dock sections where a standard 115V shore power outlet is within reach. The P500 series keeps ice at bay through water circulation, not heat. A 12-inch propeller pulls warmer water up from below the surface and moves it outward along the waterline, breaking the conditions ice needs to form. It runs continuously through the winter without the operating costs or maintenance concerns that come with heating elements. The motor is totally enclosed and thermally protected, built for unattended continuous-duty operation in outdoor conditions. The housing is UV-stabilized polyethylene that resists sun degradation and handles freeze-thaw cycles without cracking or fading. Everything needed to hang and run the unit is included in the box. Motor: 0.5 HP, 115V, 60 Hz, single-phase Cord length: 100 feet Propeller diameter: 12 inches Effective de-icing radius: up to 75 feet in diameter depending on water depth and temperature Motor housing: UV-stabilized polyethylene Includes: motor, 100-foot power cord, stainless steel hanging bracket, and propeller guard Rated for continuous duty operation Thermally protected motor The 100-foot cord covers most standard slip setups on 115V service. If your power source is further out or you are running 230V pedestals, Ice Eater offers other P500 configurations to match. This one is the straightforward plug-and-hang option for standard shore power. Normalized SKU: P500100

Ice Eater P500.150 Ice Eaters The Ice Eater P500.150 is a 0.5 HP, 115V de-icing unit built to keep boat slips, marina docks, and waterfront structures clear of ice through the coldest months. It runs on standard 115V single-phase power and comes with a 150-foot cord, giving you plenty of reach from shore power to the water without needing an extension. The P500 series uses a propeller-driven circulation system rather than a heating element. It pulls warmer water up from below the surface and pushes it outward, disrupting ice formation at the water line. The motor is totally enclosed and thermally protected, so it handles continuous outdoor operation without babysitting. The unit ships complete and ready to hang. A stainless steel hanging bracket is included, and the motor housing is constructed of UV-stabilized polyethylene that holds up to sun, salt, and freeze-thaw cycles season after season. The propeller guard is also included for safety around dock lines and marine life. Motor: 0.5 HP, 115V, 60 Hz, single-phase Cord length: 150 feet Propeller diameter: 12 inches Effective de-icing radius: up to 75 feet in diameter depending on water depth and temperature Motor housing: UV-stabilized polyethylene Includes: motor, 150-foot power cord, stainless steel hanging bracket, and propeller guard Rated for continuous duty operation Thermally protected motor Designed for docks, marinas, boat lifts, and waterfront pilings where ice pressure can cause serious structural damage. The 150-foot cord makes this a practical choice for larger slips or situations where the power source is set back from the water's edge. Normalized SKU: P500150

Ice Eater P500.025 Ice Eaters The Ice Eater P500.025 is a 0.5 HP, 115V de-icing unit with a 25-foot power cord. It is the shortest cord option in the 115V P500 lineup, designed for setups where a standard outlet is mounted right at the dock and you just need enough cord to reach the water without a tangle of extra cable sitting on the dock all winter. The P500 series keeps ice from forming through water circulation rather than heat. A 12-inch propeller pulls warmer water up from below the surface and pushes it outward along the waterline, breaking the conditions ice needs to set up. No heating element means no element failures and lower power draw over a long season. The motor is totally enclosed and thermally protected for continuous outdoor operation. The UV-stabilized polyethylene housing resists sun degradation and handles freeze-thaw cycling without cracking. A stainless steel hanging bracket and propeller guard are included, so the unit is ready to hang straight out of the box. Motor: 0.5 HP, 115V, 60 Hz, single-phase Cord length: 25 feet Propeller diameter: 12 inches Effective de-icing radius: up to 75 feet in diameter depending on water depth and temperature Motor housing: UV-stabilized polyethylene Includes: motor, 25-foot power cord, stainless steel hanging bracket, and propeller guard Rated for continuous duty operation Thermally protected motor The 25-foot cord works well when your 115V outlet is already on the dock structure and the slip is compact. If you need more reach, the P500 is also available in 100-foot and 150-foot cord lengths on 115V, and in 25-foot, 50-foot, and 100-foot lengths on 230V. Normalized SKU: P500025

Ice Eater P500.050 Ice Eaters Ice Eater .5 HP  115v  50' Cord  Complete  Normalized SKU: P500050

Ice Eater P500.100.615 Ice Eaters The Ice Eater P500.100.615 is a 0.5 HP, 230V de-icing unit designed for docks and marina slips wired for 230V single-phase service. It comes with a 100-foot cord, which covers most standard slip configurations without needing additional wiring runs. Like the rest of the P500 series, this unit works by circulating water rather than heating it. A 12-inch propeller draws warmer water up from below the thermocline and pushes it outward along the surface, preventing ice from forming at the waterline. No heating element means lower operating costs and no risk of element burnout over a long winter season. The motor is totally enclosed and thermally protected for continuous outdoor duty. The housing is UV-stabilized polyethylene, built to handle sun exposure, freeze-thaw cycling, and the general abuse that comes with a waterfront environment. A stainless steel hanging bracket and propeller guard are included in the box. Motor: 0.5 HP, 230V, 60 Hz, single-phase Cord length: 100 feet Propeller diameter: 12 inches Effective de-icing radius: up to 75 feet in diameter depending on water depth and temperature Motor housing: UV-stabilized polyethylene Includes: motor, 100-foot power cord, stainless steel hanging bracket, and propeller guard Rated for continuous duty operation Thermally protected motor The 230V configuration makes this the right pick for slips and docks already running 240V pedestals, where running a 115V unit would require a step-down transformer or rewiring. If your marina pedestal has a 30A or 50A 240V outlet available, this unit plugs right in and gets to work. Normalized SKU: P500100615

Ice Eater P500.150.615 Ice Eaters The Ice Eater P500.150.615 is a complete de-icer unit with a 0.5 HP motor running on 230 volts and a 150-foot cord included. The 0.5 HP motor is sized for mid-size vessels and single-slip dock applications where the higher output of the 0.75 HP models is more than the job requires. The 150-foot cord covers most standard dock configurations where the 230V power source is within a moderate distance of the slip. Ice Eater de-icers prevent ice formation by drawing warmer water up from below the surface and circulating it continuously around the hull and dock structure. That circulation stops ice from building up and eliminates the freeze pressure that cracks hulls, loosens pilings, and damages dock hardware through a hard winter. It is a passive, continuous process that runs without any intervention once the unit is in the water. This unit requires a 230-volt power supply. It will not operate on a standard 120V shore power outlet. If your dock has 230V service and the outlet is within 150 feet of the deployment point, this configuration covers the installation cleanly. If you need more cord, the 200-foot version of this same 0.5 HP 230V unit is also available. This is a complete unit. The 150-foot cord is included and no additional components are needed for installation and operation. Normalized SKU: P500150615

Ice Eater P500.200.615 Ice Eaters The Ice Eater P500.200.615 is a complete de-icer unit with a 0.5 HP motor running on 230 volts and a 200-foot cord included. The 0.5 HP motor is a step down from the 0.75 HP models in the Ice Eater lineup, making this unit a better fit for mid-size vessels and single-slip applications where the full output of the larger motor isn't necessary. Less motor, less power draw, same reliable ice prevention. Ice Eater de-icers work by drawing warmer water up from below the surface and circulating it around the hull and dock structure. That continuous circulation prevents ice from forming and stops the freeze pressure that damages hulls, pilings, and dock hardware through a hard winter. The 200-foot cord gives you enough reach for most single-dock configurations where the 230V power source is a reasonable distance from the slip. This unit requires a 230-volt power supply and will not operate on a standard 120V shore power outlet. Confirm your dock or marina has 230V service available before ordering. This is a complete unit. The 200-foot cord is included and no additional components are needed for installation and operation. Normalized SKU: P500200615

Ice Eater P500.025.615 Ice Eaters The Ice Eater P500.025.615 is a 0.5 HP, 230V de-icing unit with a 25-foot power cord. This is the shortest cord configuration in the P500 lineup, built for installations where the 230V power source is right at the dock edge and a longer cord would just be extra cable to coil up and manage all winter. The P500 series prevents ice formation through water circulation. A 12-inch propeller draws warmer water up from below the thermocline and pushes it outward along the surface, keeping the waterline clear without a heating element. That means lower operating costs and no element to burn out or replace mid-season. The motor is totally enclosed and thermally protected for continuous unattended operation. The housing is UV-stabilized polyethylene that handles sun exposure, salt air, and freeze-thaw cycling without issue. A stainless steel hanging bracket and propeller guard are included, so installation is straightforward right out of the box. Motor: 0.5 HP, 230V, 60 Hz, single-phase Cord length: 25 feet Propeller diameter: 12 inches Effective de-icing radius: up to 75 feet in diameter depending on water depth and temperature Motor housing: UV-stabilized polyethylene Includes: motor, 25-foot power cord, stainless steel hanging bracket, and propeller guard Rated for continuous duty operation Thermally protected motor The 25-foot cord is the right fit when your pedestal or outlet is mounted directly on the dock structure and you want a clean, minimal install. If your power source is further away, the P500 series is also available with 50-foot, 100-foot, and 150-foot cord options in both 115V and 230V configurations. Normalized SKU: P500025615

Ice Eater P500.050.615 Ice Eaters The Ice Eater P500.050.615 is a 0.5 HP, 230V de-icing unit with a 50-foot power cord. The shorter cord length makes it a practical choice for slips and dock sections where the 230V pedestal is close to the water, keeping things tidy without a pile of extra cord to manage through the winter. The P500 series circulates water to prevent ice formation rather than using a heating element. A 12-inch propeller draws warmer water up from below the surface and pushes it outward along the waterline, disrupting the conditions ice needs to take hold. The result is a clear zone around your dock, pilings, and hull without running up a large electric bill. The motor is totally enclosed and thermally protected for continuous outdoor operation. The UV-stabilized polyethylene housing holds up to sun, salt air, and repeated freeze-thaw cycles without cracking or fading. A stainless steel hanging bracket and propeller guard are included, so the unit is ready to hang right out of the box. Motor: 0.5 HP, 230V, 60 Hz, single-phase Cord length: 50 feet Propeller diameter: 12 inches Effective de-icing radius: up to 75 feet in diameter depending on water depth and temperature Motor housing: UV-stabilized polyethylene Includes: motor, 50-foot power cord, stainless steel hanging bracket, and propeller guard Rated for continuous duty operation Thermally protected motor The 230V configuration is the right call when your dock pedestal runs 240V service and you want to avoid step-down transformers or adapter setups. The 50-foot cord keeps the install clean when the power source is already close to the slip. If you need more reach, the P500 series is also available with 100-foot and 150-foot cords. Normalized SKU: P500050615

Ice Eater P750.100 Ice Eaters The Ice Eater P750.100 is a complete de-icer unit with a 0.75 HP motor running on 115 volts and a 100-foot cord included. Running on 115 volts, this unit works with standard shore power outlets, which makes it a straightforward option for docks and marinas that don't have 230V service at every slip. The 100-foot cord is the most compact configuration in the 115V lineup, suited for installations where the outlet is close to the water and a short, clean cord run is all that's needed. Ice Eater de-icers work by drawing warmer water up from below the surface and circulating it around the hull and dock structure. That continuous circulation prevents ice from forming and eliminates the freeze pressure that damages hulls, loosens pilings, and works apart dock hardware through a hard winter. The 0.75 HP motor generates enough water movement for larger vessels and commercial dock setups where smaller de-icers can't keep pace. If 100 feet isn't enough reach for your installation, the same 115V motor is available with longer cord options. Measure your cord run from the outlet to the planned deployment point before ordering to make sure this configuration fits your setup. This is a complete unit. The 100-foot cord is included and no additional components are needed for installation and operation. Normalized SKU: P750100

Ice Eater P750.150 Ice Eaters The Ice Eater P750.150 is a complete de-icer unit with a 0.75 HP motor running on 115 volts and a 150-foot cord included. The 115-volt power requirement is the key difference from the 230V models in the Ice Eater lineup: this unit plugs into a standard shore power outlet, making it the more accessible option for docks and marinas where 230V service isn't available at every slip. Ice Eater de-icers pull warmer water up from below the surface and circulate it continuously around the hull and dock structure. That circulation prevents ice from forming and stops the freeze pressure that damages hulls, cracks pilings, and works apart dock hardware through a hard winter. The 0.75 HP motor moves enough water for larger vessels and commercial dock setups where smaller units don't have the output to keep up. The 150-foot cord covers installations where the power outlet is close to the deployment point. If you need more reach, Ice Eater offers this same 115V motor in longer cord configurations. Measure your cord run before ordering to confirm 150 feet is sufficient for your setup. This is a complete unit. The cord is included and no additional components are needed for installation and operation. Normalized SKU: P750150