T-H Marine AHJMTR-1-DP Motor PlatesReplacement electric motor for Atlas jack plates. An alternative to replacing the entire actuator. Normalized SKU: AHJMTR1DPUPC Code: 733572204889

T-H Marine AHJM-CMA-DP Motor Plates With the Micro Jacker in place, you will have about 8.5” to work within height. This includes 1.5” of adjustment at the transom, another 1.0” on the motor side, 1.0" of adjustment with the motor, and 5" of hydraulic lift with the Micro Jacker itself.Normalized SKU: AHJMCMADPUPC Code: 733572073409

T-H Marine AHJMTR-2-DP Motor PlatesReplacement electric motor for Atlas jack plates. An alternative to replacing the entire actuator. Normalized SKU: AHJMTR2DPUPC Code: 733572204957

Teleflex DK3014 Motor Plates Replacement hardware for Detwiler jack plates. Normalized SKU: DK3014 UPC Code: 808282303501

Teleflex DK6135 Motor Plates 1/2 inch stainless mounting bolt packs. Bolts are course threaded and with brass waxed Ny-Loc nuts to keep from galling. Each kit contains 4 bolts, 8 washers, and 4 nuts. Composed of marine-grade quality materials. Bolt Kit: 3-1/2 inch Stainless steel Brass nylock nuts and SS washers Dimensions: 1/2 inch-13 UNC x 3-1/2 inch L Normalized SKU: DK6135UPC Code: 808282303570

T-H Marine AHJM-4-DP Motor Plates SMALLEST & LIGHTEST HYDRAULIC JACK ON THE MARKETFor Small Outboards - Max Weight 425 lbs / Max Horsepower 115 HPGreat For Shallow Water Boats – Gheenoes River Runners – Jon Boats - SkiffsGet Out of Trouble Fast – Lifts in 8 Seconds Lightweight – Only 23 Pounds Fish “Skinny Water” With Confidence Self-Contained Hydraulics Maximum outboard dry weight: 425 pounds Maximum outboard horsepower: 115 HP* Only Four (4) Inch Setback Clamp-On Motor Adapter Available (optional) Small Footprint – Only 14-5/8” Wide and 11-1/2” HighClamp-On Motor Adapter (part # AHJM-CMA-DP) allows you to mount smaller engines with clamp-on brackets to the ATLAS Micro Jacker since they do not mount with bolts on the standard BIA engine hole pattern.Adjustment specificationsWith the Micro Jacker in place, you will have about 8.5” to work within height. This includes 1.5” of adjustment at the transom, another 1.0” on the motor side, 1.0" of adjustment with the motor, and 5" of hydraulic lift with the Micro Jacker itself.* Horsepower note: To the best of T-H Marine's knowledge, Honda has the only 115 horsepower outboard that exceeds 425-pound dry weight. Therefore, the ATLAS Micro cannot be used with Honda's 115 HP outboard. This is based on publicly available internet specifications on outboard manufacturer websites known to T-H Marine as of 4/9/2014.Purchasers should ensure that their outboard does not exceed either 115 horsepower or 425 pounds, regardless of the outboard manufacturer, model, or production date. Note: Gauge not available for Atlas Micro Jacker. Atlas Micro Jacker does not come with the clamp-on motor adapter (AHJM-CMA-DP).Normalized SKU: AHJM4DPUPC Code: 733572073201

Cook Manufacturing 65302 Motor PlatesMade of 1/2" 6061 T6 alloy aluminum extrusions with stainless steel fasteners. Ideal for fresh or salt water use. Max. lifting capacity of 7853 lbs thrust. Easily lifts even a V-6 300hp max. motor at full throttle. Hydraulic actuator is fully accessible without removing the engine and is completely self-contained with its own fluid reservoir. Made of 100% non-ferrous material, impervious to saltwater and freshwater. Roller assembly features stainless steel 3/4" pin with aluminum-bronze alloy rollers. Rated for V-6 motors and smaller. Provides 5" of vertical travel with 1-1/2" of adjustment on motor bracket and 1-1/2" of adjustment on transom bracket for total 8" of possible adjustment.CMC PL-65HS w/o gauge 5.5 #65302Normalized SKU: 65302UPC Code: 739697653021

Bob's Machine Shop 100-811000-NOPC Motor Plates Bob’s Machine Shop has just launched a new line of jack plates for smaller boats with lower-hp engines. The lightweight Mini Jacs feature a smaller footprint and, depending on the model, will handle engines up to 50 HP. High-performance boaters use jack plates for more speed, better fuel economy, and improved boat handling. In recent years, jacks have also become popular with fishermen and pleasure boaters who operate in shallow water. Action Mini Jacs come in 2 models: The standard version weighs 40 pounds and has the same dimensions as BMS’s regular jack plates. It fits the standard BIA bolt pattern and provides 6" of hydraulic lift. Mini Jacs also come in a narrower width for smaller boats with clamp-on style motors. This model weighs 40 pounds but still provides 6" of lift. All Mini Jacs come with a 5-1/2" setback. Bob’s Machine Shop’s jack plates use hi-tech bearings that will not absorb water.  They also feature automobile-type grease fittings – a unique feature among jack plates. Lifetime warranty on the structure Automotive grease nipples for easy lubrication Tension rods Made in the USA, in our own factory in Tampa, Florida Designed for motors up to 50 HP that have transom mounting clamps  6″ of hydraulic lift  pump integrated inside the jack plate (3-year warranty on pump) Limited Lifetime Structure Warranty against manufacturing defects 36 lbs 14-3/4″ / 37cm Overall Length 13-1/4″ / 33cm OverallWidth 6″ / 15cm Setback. Normalized SKU: 100811000NOPC

Bob's Machine Shop 100-801000 Bob’s Machine Shop has just launched a new line of jack plates for smaller boats with lower-hp engines. The lightweight Mini Jacs feature a smaller footprint and, depending on the model, will handle engines up to 50 hp. ***Note: This unit can be used for either full BIA bolt pattern Bolt-on motors OR any clamp-on motors.  Most clamp-on will want to use the Narrow unit, but if you think you might upgrade in the future or have a motor with a wide bracket, this is a perfect choice!*** Bob’s Machine Shop has just launched a new line of jack plates for smaller boats with lower-hp engines. The lightweight Mini Jacs feature a smaller footprint and, depending on the model, will handle engines up to 50 hp. High-performance boaters use jack plates for more speed, better fuel economy and improved boat handling. In recent years, jacks have also become popular with fishermen and pleasure boaters who operate in shallow water. Mini Action Jacs come in two models:  The standard version weighs 40 pounds and has same dimensions as BMS’s regular jack plates.  It fits the standard BIA bolt pattern and provides 6″ of hydraulic lift.  The other is a narrow version only for clamp on motors. Lifetime warranty on structure Automotive grease nipples for easy lubrication Tension rods Made in USA, in our own factory in Tampa, Florida Includes Jack plate, wiring harness, relays, rocker style switch Limited Lifetime Structure Warranty against manufacturing defects 6″ of hydraulic lift pump integrated into jack plate  (3 year warranty on pump) 40 pounds/18 kilos 14 7/8:/37cm OAL 17 3/4″/45 OAW  6″/15cm set back. Normalized SKU: 100801000UPC Code: 818377011631

Bob's Machine Shop 100-105000 Bob’s Kick-Back Plate Features : 28 LBS total weight Width – 17.5” Height – 12” Offset – 5.5” 45-degree tilt up (kick up) Delrin rollers and bearings for smooth operation; No need for chains or spring Motor tether attachment point for safety Locking pins to prevent the plate from kicking out in reverse or trailering Greaseable pivot points – automotive zerk fittings Patent pending Rated up to 115 HP motors – BIA bolt pattern Optional clamp-on style kit available. Item number is 100-105001 WARNING: This unit is rated for outboard motors up to a maximum of 115 H.P. Do not encounter obstructions at speeds over 5 M.P.H and only in the forward direction. It is not designed or intended to encounter obstructions while the boat is being operated in the reverse direction. Normalized SKU: 100105000UPC Code: 818377010948

Bob's Machine Shop 100-104101 Bob’s Machine Shop’s new hydraulic jack plate line, “Action Series Jack Plate™”, offers new technology in the Jack Plate market. The first Bob’s Jack plate to offer a pump inside the jack plate structure, saving boaters room inside the boat, and eliminating the need to mount a pump inside the boat. This is a great OEM feature to help save time in rigging.The new internal pump has a motor stronger than any other internal jack plate on the market currently, which will offer greater lifting speed and strength with heavy outboards. All of Bob’s patented features from our standard series, automotive-style grease nipples in the side rails, tension rods, and the famous Bob’s Machine Shop Design, are all incorporated into the Action Series Jack Plate™.Offered in 4″, 6″, 8″, 10″, 12″ and 14″ setbacks, Bob’s Jack plates offer 1 piece design, unlike competitors that require setback spacers to achieve the proper setback.Action series support motors up to a 14.5″ mounting width. If wider we recommend our Extreme Gen 3 series jack plates. The pump is inside the jack plate 1.5″ of lift built into structure & 6″ of adjustable travel for a total of 7.5″ total lift Large powerful motor that can lift heavy outboards under full power Can be converted to have the pump inside the boat if the owner desires to change styles Automotive grease nipples for easy lubrication Tension rods Made in the USA, in our own factory in Tampa, Florida Rated for 300HP, up to 625 lbs motors (heavier should use Extreme series) Pre-drilled for dual side mount Power Pole brackets. Includes Jack plate, wiring harness, relays, rocker style switch Limited Lifetime Structure Warranty against manufacturing defects 5 Year Action Pump Warranty Normalized SKU: 100104101UPC Code: 818377011532

Bob's Machine Shop 120-120001 Hydraulic Pump Motor Only For use on standard series jack plate pumps Normalized SKU: 120120001UPC Code: 818377012393

T-H Marine AHJ-4VHD-B-DP Motor PlatesATLAS™ 4" Set Back Hydraulic Jack Plate - Heavy Duty BlackT-H Marine’s ATLAS™ Hydraulic Jack Plate is now available in a “HEAVY DUTY” upgrade.T-H Marine’s ATLAS™ Hydraulic Jack Plate is the #1 selling jack plate in the world and the #1 Choice by fishing professionals and boat manufacturers. With the new ATLAS™ HEAVY DUTY, the product is available for applications on even larger outboards, rated for engines up to 400 hp. 5 REASONS YOU SHOULD CHOOSE THE ATLAS™ HYDRAULIC JACK PLATE ATLAS™ is truly the best hydraulic jack plate in the world ATLAS™ is factory installed by more boat manufacturers than any other plate ATLAS™ is used by more professional fisherman than any other hydraulic jack plate ATLAS™ is the #1 selling hydraulic plate in the world – sold & serviced by more outlets ATLAS™ hydraulic actuator is made in the U.S.A. vs. our competitors being from China 6 WAYS THE ATLAS™ CHANGED HYDRAULIC JACK PLATES FOREVER ATLAS™ is made by T-H Marine/CMC, who were the FIRST to offer an actuator inside the jack plate – the competition copied ATLAS™ was the first plate to offer predrilling for shallow water anchors – the competition copied ATLAS™ was the first and only plate that did not require regular grease lubrication – the competition design cannot do that ATLAS™ was the first plate to include a heavy duty safety cable to protect boaters from engine entering cockpit upon failure ATLAS™ was the first plate to offer a very simple actuator replacement in the field ATLAS™ was the first major development in hydraulic jack plates in over a decade – spurring hydraulic jack plate improvement WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Normalized SKU: AHJ4VHDBDPUPC Code: 733572096552

T-H Marine JPZ-4-DP Motor PlatesExclusive Z-Lock design provides maximum strength. Prevents side slippage and movement. Easily adjusts up or down with center bolt. Full 1/2" aluminum material for strength. Handles all V6 outboards - 300hp max.Normalized SKU: JPZ4DPUPC Code: 733572084252

T-H Marine JPZ-10-DP Motor PlatesThe excellence of T-H Marine's Hi-Jacker jack plate series continues with the Z-Lock Manual Jack Plate design upgrade. The new Z-Lock design eliminates side slippage and is made of strong aircraft grade aluminum a full 1/2" thick for strength. It will handle all V6 outboards up to 300 HP and is easy to adjust from the top of the jack. The Z-Lock allows 5" of vertical adjustment and is available in 4", 6", 8", 10" and 12" setbacks. Design eliminates side slippage Made of strong aircraft grade aluminum a full 1/2" thick for strength Handles all V6 outboards up to 300 HP Allows 5" of vertical adjustment Available in 4", 6", 8", 10" and 12" setbacks Normalized SKU: JPZ10DPUPC Code: 733572070804

T-H Marine JP-6PW-DP Motor PlatesFor maximum performance and ease of use, the Pro Hi-Jacker™ offers quick and easy adjustment of plate height with the turn of one bolt from the top side of the jack plate. This jack plate offers a one-piece mounting surface that completely supports stern brackets and covers requirements of OMC Service Bulletin No. 2281. This plate is polish finished for superior appearance and corrosion resistance. Plates are constructed of aircraft quality aluminum with stainless steel and brass hardware. Fits all V-4 and V-6 outboards. Provides 4" of vertical adjustment.T-H Marine Pro Hi-Jacker/Polish Finish JP-6PW-DPNormalized SKU: JP6PWDPUPC Code: 733572002034