Download LiteratureVictron Energy BAT524110740 BatteriesLithium Battery SuperPack 24V/100Ah NGThe Lithium SuperPack NG batteries are Lithium Iron Phosphate (LiFePO4 or LFP) batteries available in various capacities with nominal voltages of 12,8V, 25,6V, and 51,2V. They are designed as drop-in replacements for lead-acid batteries in mobile, marine, and industrial applications. Designed for extended off -grid use, it provides ample capacity to power the complete electrical system, including high -demand appliances. Its form factor and terminal layout ensure easy installation across a wide range of mobile and industrial applications, including commercial and recreational vehicles.The Lithium SuperPack batteries are extremely easy to install, not needing any additional components. The internal switch will disconnect the battery in case of over-discharge or high temperature.The Lithium SuperPack batteries can be connected in parallel. A series connection is not allowed.Embedded protection: The integrated Battery Management System (BMS) provides a layer of protection that ensures energy flow remains within the safe operating limits of the battery and the overall system.Energy flow management: Capable of interrupting charging and discharging independently through its self-resetting circuit breaker.Continuous current capability: Supports continuous discharge currents up to 2C and continuous charge currents up to 1C, reducing the need to oversize the battery pack.Internal cell balancing: Allows the battery to maintain optimal voltage balance at the end of the charging process.Bluetooth monitoring and control: Integrated Bluetooth interface for real-time monitoring and control of the battery via VictronConnect.On/Off push button: Push button for switching the battery on or off, disabling both charging and discharging. The on/off procedure can also be used to reset certain protection or lock-in conditions. When switched off, the battery enters a storage mode with a self-discharge rate of less than 3% per month.LED status indication: Two integrated LEDs indicate Bluetooth connectivity, warning and alarm conditions, and firmware update status.External Feedback Signal (EFS): Provides a battery voltage signal limited to 250 mA. The EFS signal serves as an External Disconnection Signal (EDS) to trigger an event for redundant system protection. Additionally, the EFS can be configured as an External Charging Signal (ECS), based on the low SoC pre-alarm threshold, to activate a charger start signal.Self -heating function: Maintains the battery temperature above the minimum safe charging limit to ensure reliable operation in cold environments. Two heating modes are available: Charger mode – the heater is powered by the connected charger and activates automatically when the cell temperature drops below 0 °C during charging (default setting). Auto mode – the battery powers the heater to keep the cells above 0 °C for immediate charging. This is limited by the battery’s internal energy; if SoC falls below the Low SoC threshold, the heater is disconnected, and charging remains unavailable. The internal heat balancer supports optimised thermal management and a wide operating range.Parallel connection: Supports parallel connection of an unlimited number of batteries to increase total energy capacity. The total system current should not exceed the maximum current that a single battery can safely interrupt (refer to Battery Specification [28] for details.BCI Group 49 compatibility: Height dimension is compatible with the BCI Group 49 standard, allowing easy replacement in standard battery compartments.Mounting brackets: Mounting brackets are included to ensure safe and stable fixing in all three axes.Ingress protection (IP65): The battery enclosure is rated IP65, providing protection against dust ingress and low-pressure water jets from any direction.Self-restoring protection: Certain protection events are automatically cleared without user intervention. The battery allows multiple automatic recovery attempts for short-circuit and over-current conditions, reducing the need for manual reset in the case of occasional or transient faults. Please contact your dealer for any returns, repairs or support issues related to this product. Normalized SKU: BAT524110740Victron Energy BAT524110740 Literature Download Quick Reference Guide

Download LiteratureVictron Energy BAT512115620 BatteriesLithium Battery 12VDC 150Ah NG Smart LifePO4The NG (Next Generation) series builds on the achievements of the Lithium Smart Series, featuring substantial improvements. Designed for individuals in need of sophisticated and dependable energy storage solutions, the Lithium NG series represents a crucial development in our product range, prepared to address the challenges of the future.Victron Energy Lithium NG batteries are Lithium Iron Phosphate (LiFePO4 or LFP) batteries available with nominal voltages of 12.8V, 25.6V, and 51.2V in various capacities. They can be connected in series, parallel, and series/parallel so that a battery bank can be built for system voltages of 12V, 24V, or 48V. The maximum number of batteries in one system is 50, which results in a maximum energy storage of 192 kWh in a 12V system and up to 384 kWh in a 24V and 48V system.Integrated shuntThe battery data (battery voltage, current, and temperature) are transmitted to the BMS and evaluated there, i.e. to calculate the state of charge, which can then be read out via VictronConnect or a GX communication center, or to create and issue specific warnings and alarms.Automatic setup, monitoring, and control via VictronConnect App or a GX device and the VRM PortalAll battery parameters are managed by the BMS automatically. The BMS automatically detects the system voltage and the number of batteries in parallel, series, and series/parallel connections. The BMS (from now on Lynx Smart BMS NG 500 A/1000 A, further models to follow) is mandatory and must be purchased separately.Monitoring and control take place via VictronConnect (every BMS model has Bluetooth), a GX communication center, or the VRM Portal. You can view battery parameters such as cell status, cell voltages, battery current, and temperatures in real time. The battery firmware is automatically updated by the BMS.Easy bracket mountingMounting brackets make the installation easier and ensure that the battery is optimally secured against slipping and tipping over.Increased ingress protection (IP-rating)The Lithium NG batteries are effectively sealed against dust and can withstand low-pressure water jets, making them suitable for environments where exposure to dust and water is a concern.Low self-discharge rateThe self-discharge rate has been significantly improved and is now a maximum of 2 % of the battery capacity per month. A low self-discharge rate contributes to the overall performance, longevity, and reliability of the NG batteries.Features: Multiple improvements including added read-out of cell voltages and temperatures Maximum single bank size increased to 385kWh Modules available in 12, 24 and 48V Protection class IP65 Bracket mounting and strap mounting Please contact your dealer for any returns, repairs or support issues related to this product. Normalized SKU: BAT512115620Victron Energy BAT512115620 Literature Download Quick Reference Guide Owners Manual

Download LiteratureVictron Energy BAT512110620 BatteriesLithium Battery 12VDC 100Ah NG Smart LifePO4The NG (Next Generation) series builds on the achievements of the Lithium Smart Series, featuring substantial improvements. Designed for individuals in need of sophisticated and dependable energy storage solutions, the Lithium NG series represents a crucial development in our product range, prepared to address the challenges of the future.Victron Energy Lithium NG batteries are Lithium Iron Phosphate (LiFePO4 or LFP) batteries available with nominal voltages of 12.8V, 25.6V, and 51.2V in various capacities. They can be connected in series, parallel, and series/parallel so that a battery bank can be built for system voltages of 12V, 24V, or 48V. The maximum number of batteries in one system is 50, which results in a maximum energy storage of 192 kWh in a 12V system and up to 384 kWh in a 24V and 48V system.Integrated shuntThe battery data (battery voltage, current, and temperature) are transmitted to the BMS and evaluated there, i.e. to calculate the state of charge, which can then be read out via VictronConnect or a GX communication center, or to create and issue specific warnings and alarms.Automatic setup, monitoring, and control via VictronConnect App or a GX device and the VRM PortalAll battery parameters are managed by the BMS automatically. The BMS automatically detects the system voltage and the number of batteries in parallel, series, and series/parallel connections. The BMS (from now on Lynx Smart BMS NG 500 A/1000 A, further models to follow) is mandatory and must be purchased separately.Monitoring and control take place via VictronConnect (every BMS model has Bluetooth), a GX communication center, or the VRM Portal. You can view battery parameters such as cell status, cell voltages, battery current, and temperatures in real time. The battery firmware is automatically updated by the BMS.Easy bracket mountingMounting brackets make the installation easier and ensure that the battery is optimally secured against slipping and tipping over.Increased ingress protection (IP-rating)The Lithium NG batteries are effectively sealed against dust and can withstand low-pressure water jets, making them suitable for environments where exposure to dust and water is a concern.Low self-discharge rateThe self-discharge rate has been significantly improved and is now a maximum of 2 % of the battery capacity per month. A low self-discharge rate contributes to the overall performance, longevity, and reliability of the NG batteries.Features: Multiple improvements including added read-out of cell voltages and temperatures Maximum single bank size increased to 385kWh Modules available in 12, 24 and 48V Protection class IP65 Bracket mounting and strap mounting Please contact your dealer for any returns, repairs or support issues related to this product. Normalized SKU: BAT512110620Victron Energy BAT512110620 Literature Download Quick Reference Guide Owners Manual

Victron Energy BAT512120740 Batteries The Lithium SuperPack NG 12.8V 200Ah battery is a true drop-in replacement for standard lead-acid batteries, offering ample capacity for extended off-grid use while powering complete electrical systems, including high-demand appliances, with an easy fit for large trucks, SUVs, and RVs thanks to its compatible form factor and terminal layout. Bluetooth monitoring and control via Bluetooth Smart allows wireless configuration, monitoring, and firmware updates using the VictronConnect App, with Instant Readout showing state of charge, battery temperature, warnings, and alarms directly in the device list without connecting Built-in BMS and battery monitor provide integrated cell balancing, protection, and monitoring to ensure optimal performance and safety over the battery service life External Feedback Signal provides a battery voltage signal limited to 250 mA and can act as an External Disconnection Signal for redundant system protection or as an External Charging Signal based on the low state of charge pre-alarm threshold to trigger a charger start Self-heating function keeps the battery above the minimum safe charging temperature for reliable cold-weather operation with charger mode using external charger power below 0 °C and auto mode using battery power until the low state of charge threshold is reached LED status indication uses two integrated LEDs to show Bluetooth connectivity, warnings, alarms, and firmware update status On and off push button allows safe shutdown of charging and discharging for operation or extended storage High efficiency operation delivers up to 93% efficiency Parallel connection supports an unlimited number of batteries to increase total energy capacity, as long as total system current stays within the safe interrupt rating of a single battery Configurable discharge floor lets users set a minimum state of charge to prevent excessive discharge while maintaining reserve capacity, with low state of charge alarms and discharge lockout until recovery Nominal voltage: 12.8 volts Nominal capacity at 25°C: 200 Ah Nominal energy at 25°C: 2560 Wh Capacity loss per 100 cycles at 25°C and 100% depth of discharge: less than 5% Round-trip efficiency: 93% Cycle life at 25°C: 80% depth of discharge: 2500 cycles 70% depth of discharge: 3000 cycles 50% depth of discharge: 5000 cycles Discharge: Maximum continuous discharge current: 400 amp End of discharge voltage: 11.2 volts Internal resistance: 1 mΩ Charge: Recommended charge voltage: 14 volts Float voltage: 13.5 volts Charge voltage range: 13.5 to 14.2 volts Maximum continuous charge current: 200 amp Features: Hardware protection: system max current short circuit above 800 amps Software protections: overvoltage, undervoltage, overtemperature, undertemperature, overcurrent Wired communication: external feedback signal Bluetooth: yes, VictronConnect App User interface: push button on and off, blue LED, error LED Self-heating max power: 130 watts Operating conditions: Parallel configuration: yes, unlimited energy expansion within system current limits Series configuration: no Operating temperature: charge and discharge from -30°C to 60°C Humidity operating range: less than 90% RH, non-condensing Storage temperature: recommended 10°C to 35°C, extended -40°C to 65°C Max storage time at 25°C: 1 year with at least 50% state of charge Protection class: IP65 Mounting: Power connection: M8 female threaded insert Mounting options: upright or on its side, maintain flat horizontal support Dimensions: 466 x 198 x 173 mm (18.35 × 7.80 × 6.81 inches) Weight: 20.5 kg (45.2 pounds) Standards: Cells: UL1973 Safety approvals: UL9540A, IEC62619 Normalized SKU: BAT512120740

Victron Energy BAT512110740 Batteries The Lithium SuperPack NG 12.8 volt 100Ah battery is a true drop-in replacement for standard lead acid batteries, offering ample capacity for extended off-grid use while powering complete electrical systems, including high-demand appliances, with an easy fit for large trucks, SUVs, and RVs thanks to its compatible form factor and terminal layout. Bluetooth monitoring and control via Bluetooth Smart allows wireless configuration, monitoring, and firmware updates using the VictronConnect App, with Instant Readout showing state of charge, battery temperature, warnings, and alarms directly in the device list without connecting Built-in BMS and battery monitor provide integrated cell balancing, protection, and monitoring to ensure optimal performance and safety over the battery service life External Feedback Signal provides a battery voltage signal limited to 250 mA and can act as an External Disconnection Signal for redundant system protection or as an External Charging Signal based on the low state of charge pre-alarm threshold to trigger a charger start Self-heating function keeps the battery above the minimum safe charging temperature for reliable cold-weather operation with charger mode using external charger power below 0 °C and auto mode using battery power until the low state of charge threshold is reached LED status indication uses two integrated LEDs to show Bluetooth connectivity, warnings, alarms, and firmware update status On and off push button allows safe shutdown of charging and discharging for operation or extended storage High efficiency operation delivers up to 93% efficiency Parallel connection supports an unlimited number of batteries to increase total energy capacity, as long as total system current stays within the safe interrupt rating of a single battery Configurable discharge floor lets users set a minimum state of charge to prevent excessive discharge while maintaining reserve capacity, with low state of charge alarms and discharge lockout until recovery Nominal voltage: 12.8 volts Nominal capacity at 25°C: 100 Ah Nominal energy at 25°C: 1280 Wh Capacity loss per 100 cycles at 25°C and 100% depth of discharge: less than 5% Round-trip efficiency: 93% Cycle life at 25°C: 80% depth of discharge: 2500 cycles 70% depth of discharge: 3000 cycles 50% depth of discharge: 5000 cycles Discharge: Maximum continuous discharge current: 200 amps End of discharge voltage: 11.2 volts Internal resistance: 2 mΩ Charge: Recommended charge voltage: 14 volts Float voltage: 13.5 volts Charge voltage range: 13.5 to 14.2 volts Maximum continuous charge current: 100 amps Features: Hardware protection: system max current short circuit above 800 amps Software protections: overvoltage, undervoltage, overtemperature, undertemperature, overcurrent Wired communication: external feedback signal Bluetooth: yes, VictronConnect App User interface: push button on and off, blue LED, error LED Self-heating max power: 65 watts Operating conditions: Parallel configuration: yes, unlimited energy expansion within system current limits Series configuration: no Operating temperature: charge and discharge from -30°C to 60°C Humidity operating range: less than 90% RH, non-condensing Storage temperature: recommended 10°C to 35°C, extended -40°C to 65°C Max storage time at 25°C: 1 year with at least 50% state of charge Protection class: IP65 Mounting: Power connection: M8 female threaded insert Mounting options: upright or on its side, maintain flat horizontal support Dimensions: 273 x 173 x 173 mm (10.7 x 6.8 x 6.8 inches) Weight: 10.7 kg (23.6 pounds) Standards: Cells: UL1973 Safety approvals: UL9540A, IEC62619 Normalized SKU: BAT512110740