00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Taylor Made
Taylor Made 8" Diameter Piling Cap Black #6206
$15.25
$18.20
Taylor Made 6206 Ice EatersMade from heavy duty polypropylene, these piling caps will discourage birds from sitting on top of your pilings. Available in 5 diameters to best fit your needs.Normalized SKU: 6206UPC Code: 04001112714
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Kasco Marine
Kasco Marine Horizontal Float #213001
$340.81
$432.86
Kasco Marine 213001 Ice Eaters
Kasco De-icers come complete for suspended operation from a dock or boat in either a vertical or angled position. Angle operation by suspended method or with an optional flotation unit produces an elongated pattern of agitated water. Vertical positioning produces a circular pattern.
Kasco Marine offers an optional dock or piling mount. A Kasco De-icer may be operated in either a vertical or several angle positions. The de-icer may be adjusted to a maximum length of 10 feet from the mounting bracket. Kasco De-icers can be attached to our optional flotation kit to create an elongated deicing pattern in either fresh or salt water.
Ideal for shallow water zones, locations with changing water and ice conditions like tidal regions, and extended open water spaces such as those surrounding lengthy docks.
Normalized SKU: 213001UPC Code: 727168213010
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Ice Eater
Ice Eater .75 HP 230v 400' Cord Complete #P750.400.615
$2,080.00
$2,250.75
Ice Eater P750.400.615 Ice Eaters
The Ice Eater P750.400.615 is a complete de-icer unit running on a 0.75 HP motor at 230 volts, and it comes with a 400-foot cord already included. That cord length is the standout spec here: 400 feet gives you the reach to deploy this unit in larger slips, wide marina basins, or commercial dock configurations where shorter-cord units simply can't cover the distance from the power source to the water.
Ice Eater de-icers work by drawing warmer water up from below the surface and circulating it around the hull and dock structure. This keeps ice from forming and prevents the pressure buildup that can damage hulls, pilings, and dock hardware during a hard freeze. The 0.75 HP motor moves a serious volume of water, making this unit appropriate for larger vessels and commercial marina applications rather than a single residential slip.
The 230-volt power requirement means this unit needs a dedicated 230V outlet at the dock. Confirm your marina or dock electrical setup can supply 230V before ordering, as this unit is not compatible with standard 120V shore power outlets.
This is a complete unit, so everything needed for installation and operation is included out of the box. No separate cord purchase required.
Normalized SKU: P750400615
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Ice Eater
Ice Eater .75 HP 230v 350' Cord Complete #P750.350.615
$1,955.00
$2,115.49
Ice Eater P750.350.615 Ice Eaters
The Ice Eater P750.350.615 is a complete de-icer unit powered by a 0.75 HP motor running on 230 volts, and it ships with a 350-foot cord included. The 350-foot cord length covers most marina slip and commercial dock configurations where the power source is a reasonable distance from the water, without the added cost of the 400-foot version when that extra 50 feet isn't needed.
Ice Eater de-icers circulate warmer water from below the surface up around the hull and dock structure, preventing ice formation and the pressure damage that comes with a hard freeze. Hulls, pilings, and dock hardware all take a beating when ice builds up and expands against them. The 0.75 HP motor moves enough water volume to protect larger vessels and multi-slip commercial dock setups, not just a single residential berth.
This unit requires a 230-volt power supply at the dock. A standard 120V shore power outlet will not work. Confirm your dock or marina electrical service can provide 230V before ordering.
Everything needed for installation and operation is included. No separate cord or additional components required to get this unit in the water and running.
Normalized SKU: P750350615
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Ice Eater
Ice Eater .75 HP 230v 300' Cord Complete #P750.300.615
$1,835.00
$1,985.63
Ice Eater P750.300.615 Ice Eaters
The Ice Eater P750.300.615 is a complete de-icer unit with a 0.75 HP motor running on 230 volts and a 300-foot cord included. The 300-foot cord is the right call when your power source is within a reasonable distance of the slip or dock section you need to protect, and you don't need the extra length of the 350 or 400-foot versions.
Ice Eater de-icers pull warmer water up from below the surface and circulate it around the hull and dock structure, preventing ice from forming and building up pressure against pilings, hulls, and dock hardware. The 0.75 HP motor handles larger vessels and multi-slip commercial dock setups with enough water movement to keep ice at bay through a hard freeze.
This unit runs on 230 volts and requires a dedicated 230V outlet at the dock. Standard 120V shore power will not run this unit. Confirm your dock or marina electrical service supplies 230V before ordering.
This is a complete unit. The cord is included and no additional components are needed to get it installed and operating.
Normalized SKU: P750300615
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Ice Eater
Ice Eater .75 HP 230v 250' Cord Complete #P750.250.615
$1,710.00
$1,850.37
Ice Eater P750.250.615 Ice Eaters
The Ice Eater P750.250.615 is a complete de-icer unit with a 0.75 HP motor running on 230 volts and a 250-foot cord included. The 250-foot cord is a good fit for dock configurations where the 230V power source is relatively close to the deployment area, such as a single dock section or a compact marina layout where longer cord runs aren't necessary.
Ice Eater de-icers work by drawing warmer water up from below the surface and circulating it around the hull and dock structure. This continuous circulation prevents ice from forming and stops the freeze pressure that damages hulls, pilings, and dock hardware during winter. The 0.75 HP motor generates enough water movement for larger vessels and commercial dock applications where a smaller unit wouldn't cut it.
The 230-volt power requirement is worth double-checking before ordering. This unit will not operate on a standard 120V shore power outlet. A dedicated 230V supply at the dock is required.
This is a complete unit with the cord included. No additional components are needed for installation and operation.
Normalized SKU: P750250615
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Ice Eater
Ice Eater .75 HP 230v 200' Cord Complete #P750.200.615
$1,828.74
$2,121.34
Ice Eater P750.200.615 Ice Eaters
The Ice Eater P750.200.615 is a complete de-icer unit with a 0.75 HP motor running on 230 volts and a 200-foot cord included. The 200-foot cord is the shortest in the Ice Eater 0.75 HP 230V lineup, making it the right fit when your 230V power source is close to the deployment point and you don't need extra cord length getting in the way.
Like all Ice Eater de-icers, this unit works by pulling warmer water up from below the surface and circulating it continuously around the hull and dock structure. That circulation prevents ice from forming and eliminates the freeze pressure that cracks hulls, damages pilings, and works apart dock hardware over a hard winter. The 0.75 HP motor moves enough water for larger vessels and commercial dock setups where smaller de-icers don't have the output to keep up.
This unit requires a 230-volt power supply. It will not run on a standard 120V shore power outlet. Verify your dock or marina electrical service provides 230V before ordering.
This is a complete unit. The 200-foot cord is included and no additional components are needed for installation.
Normalized SKU: P750200615
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Ice Eater
Ice Eater .75 HP 230v 150' Cord Complete #P750.150.615
$1,769.36
$2,052.46
Ice Eater P750.150.615 Ice Eaters
The Ice Eater P750.150.615 is a complete de-icer unit with a 0.75 HP motor running on 230 volts and a 150-foot cord included. At 150 feet, this is the most compact cord option in the Ice Eater 0.75 HP 230V lineup, best suited for installations where the 230V power outlet is close to the slip or dock section being protected and a shorter cord run keeps things clean and manageable.
Ice Eater de-icers circulate warmer water from below the surface up around the hull and dock structure, keeping ice from forming and preventing the freeze pressure that splits hulls, loosens pilings, and works apart dock hardware through a hard winter. The 0.75 HP motor delivers the water movement needed for larger vessels and commercial dock applications where a lighter-duty unit wouldn't keep up.
A 230-volt power supply is required to operate this unit. It is not compatible with standard 120V shore power. Before ordering, confirm that your dock or marina has a 230V outlet available at or near the installation point.
This is a complete unit. The 150-foot cord is included and no additional components are required for installation and operation.
Normalized SKU: P750150615
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Ice Eater
Ice Eater .75 HP 115v 150' Cord Complete #P750.150
$1,769.36
$2,052.46
Ice Eater P750.150 Ice Eaters
The Ice Eater P750.150 is a complete de-icer unit with a 0.75 HP motor running on 115 volts and a 150-foot cord included. The 115-volt power requirement is the key difference from the 230V models in the Ice Eater lineup: this unit plugs into a standard shore power outlet, making it the more accessible option for docks and marinas where 230V service isn't available at every slip.
Ice Eater de-icers pull warmer water up from below the surface and circulate it continuously around the hull and dock structure. That circulation prevents ice from forming and stops the freeze pressure that damages hulls, cracks pilings, and works apart dock hardware through a hard winter. The 0.75 HP motor moves enough water for larger vessels and commercial dock setups where smaller units don't have the output to keep up.
The 150-foot cord covers installations where the power outlet is close to the deployment point. If you need more reach, Ice Eater offers this same 115V motor in longer cord configurations. Measure your cord run before ordering to confirm 150 feet is sufficient for your setup.
This is a complete unit. The cord is included and no additional components are needed for installation and operation.
Normalized SKU: P750150
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Ice Eater
Ice Eater .75 HP 230v 100' Cord Complete #P750.100.615
$1,508.11
$1,749.41
Ice Eater P750.100.615 Ice Eaters
The Ice Eater P750.100.615 is a complete de-icer unit with a 0.75 HP motor running on 230 volts and a 100-foot cord included. The 100-foot cord is the shortest option in the Ice Eater 0.75 HP 230V lineup, designed for installations where the 230V power source is right at the dock and a minimal cord run is all that's needed. Less cord means less to manage, less to coil, and less clutter on the dock.
Ice Eater de-icers draw warmer water up from below the surface and circulate it around the hull and dock structure, preventing ice formation and the freeze pressure that damages hulls, pilings, and dock hardware through a hard winter. The 0.75 HP motor provides the water movement needed for larger vessels and commercial dock applications where lighter-duty units fall short.
This unit requires a 230-volt power supply and will not operate on a standard 120V shore power outlet. If your dock runs 230V service close to the slip, this 100-foot cord configuration keeps the installation clean and straightforward. If you need more reach, longer cord versions of this same unit are available.
This is a complete unit. The 100-foot cord is included and no additional components are needed for installation and operation.
Normalized SKU: P750100615
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Ice Eater
Ice Eater .75 HP 115v 100' Cord Complete #P750.100
$1,508.11
$1,749.41
Ice Eater P750.100 Ice Eaters
The Ice Eater P750.100 is a complete de-icer unit with a 0.75 HP motor running on 115 volts and a 100-foot cord included. Running on 115 volts, this unit works with standard shore power outlets, which makes it a straightforward option for docks and marinas that don't have 230V service at every slip. The 100-foot cord is the most compact configuration in the 115V lineup, suited for installations where the outlet is close to the water and a short, clean cord run is all that's needed.
Ice Eater de-icers work by drawing warmer water up from below the surface and circulating it around the hull and dock structure. That continuous circulation prevents ice from forming and eliminates the freeze pressure that damages hulls, loosens pilings, and works apart dock hardware through a hard winter. The 0.75 HP motor generates enough water movement for larger vessels and commercial dock setups where smaller de-icers can't keep pace.
If 100 feet isn't enough reach for your installation, the same 115V motor is available with longer cord options. Measure your cord run from the outlet to the planned deployment point before ordering to make sure this configuration fits your setup.
This is a complete unit. The 100-foot cord is included and no additional components are needed for installation and operation.
Normalized SKU: P750100
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Ice Eater
Ice Eater .75 HP 230v 50' Cord Complete #P750.050.615
$1,282.49
$1,487.69
Ice Eater P750.050.615 Ice Eaters
The Ice Eater P750.050.615 is a complete de-icer unit with a 0.75 HP motor running on 230 volts and a 50-foot cord included. The 50-foot cord is the shortest configuration in the Ice Eater 0.75 HP 230V lineup, built for situations where the 230V outlet is right at the slip and the unit drops almost directly below the dock. When the power source is that close, there's no reason to pay for cord length you won't use.
Ice Eater de-icers circulate warmer water from below the surface up around the hull and dock structure, preventing ice from forming and stopping the freeze pressure that damages hulls, pilings, and dock hardware through a hard winter. The 0.75 HP motor handles larger vessels and commercial dock setups where smaller de-icers don't move enough water to do the job.
This unit requires a 230-volt power supply. It will not run on a standard 120V shore power outlet. If your dock has 230V service at the slip and the outlet is within 50 feet of the deployment point, this is the most cost-effective configuration in the lineup. If you need more reach, longer cord versions are available.
This is a complete unit. The 50-foot cord is included and no additional components are needed for installation and operation.
Normalized SKU: P750050615
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Ice Eater
Ice Eater .75 HP 230v 25' Cord Complete #P750.025.615
$1,234.99
$1,481.99
Ice Eater P750.025.615 Ice Eaters
The Ice Eater P750.025.615 is a complete de-icer unit with a 0.75 HP motor running on 230 volts and a 25-foot cord included. At 25 feet, this is the shortest cord configuration in the entire Ice Eater 0.75 HP 230V lineup. It is the right choice when the 230V outlet is essentially at the edge of the dock and the unit hangs almost directly below the power source with minimal cord run between them.
Ice Eater de-icers pull warmer water up from below the surface and circulate it around the hull and dock structure, preventing ice from forming and stopping the freeze pressure that damages hulls, pilings, and dock hardware through a hard winter. The 0.75 HP motor moves enough water for larger vessels and commercial dock setups where lighter-duty units can't keep up with the job.
This unit requires a 230-volt power supply and will not operate on a standard 120V shore power outlet. Before ordering, confirm that your 230V outlet is within 25 feet of where the unit will be deployed. If you need more reach, longer cord versions of this same unit are available across the Ice Eater lineup.
This is a complete unit. The 25-foot cord is included and no additional components are needed for installation and operation.
Normalized SKU: P750025615
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Ice Eater
Ice Eater .75 HP 115v 25' Cord Complete #P750.025
$1,234.99
$1,481.99
Ice Eater P750.025 Ice Eaters
The Ice Eater P750.025 is a complete de-icer unit with a 0.75 HP motor running on 115 volts and a 25-foot cord included. This is the shortest cord configuration in the 115V lineup and the most straightforward installation scenario: standard shore power outlet close to the slip, unit drops in, done. No long cord runs, no extra management, just clean and simple.
Running on 115 volts means this unit works with standard shore power outlets found at most docks and marinas, without needing a dedicated 230V supply. That makes it accessible for a wider range of installations compared to the 230V models, and the 25-foot cord keeps the setup compact when the outlet is right there at the dock.
Ice Eater de-icers draw warmer water up from below the surface and circulate it continuously around the hull and dock structure, preventing ice from forming and stopping the freeze pressure that damages hulls, pilings, and dock hardware through a hard winter. The 0.75 HP motor moves enough water for larger vessels and commercial dock setups where smaller units fall short.
Confirm your outlet is within 25 feet of the planned deployment point before ordering. If you need more reach, longer cord versions of this same 115V unit are available.
This is a complete unit. The 25-foot cord is included and no additional components are needed for installation and operation.
Normalized SKU: P750025
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Ice Eater
Ice Eater .5 HP 230v 200' Cord Complete #P500.200.615
$1,500.00
$1,623.13
Ice Eater P500.200.615 Ice Eaters
The Ice Eater P500.200.615 is a complete de-icer unit with a 0.5 HP motor running on 230 volts and a 200-foot cord included. The 0.5 HP motor is a step down from the 0.75 HP models in the Ice Eater lineup, making this unit a better fit for mid-size vessels and single-slip applications where the full output of the larger motor isn't necessary. Less motor, less power draw, same reliable ice prevention.
Ice Eater de-icers work by drawing warmer water up from below the surface and circulating it around the hull and dock structure. That continuous circulation prevents ice from forming and stops the freeze pressure that damages hulls, pilings, and dock hardware through a hard winter. The 200-foot cord gives you enough reach for most single-dock configurations where the 230V power source is a reasonable distance from the slip.
This unit requires a 230-volt power supply and will not operate on a standard 120V shore power outlet. Confirm your dock or marina has 230V service available before ordering.
This is a complete unit. The 200-foot cord is included and no additional components are needed for installation and operation.
Normalized SKU: P500200615
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Ice Eater
Ice Eater .5 HP 230v 150' Cord Complete #P500.150.615
$1,415.00
$1,531.16
Ice Eater P500.150.615 Ice Eaters
The Ice Eater P500.150.615 is a complete de-icer unit with a 0.5 HP motor running on 230 volts and a 150-foot cord included. The 0.5 HP motor is sized for mid-size vessels and single-slip dock applications where the higher output of the 0.75 HP models is more than the job requires. The 150-foot cord covers most standard dock configurations where the 230V power source is within a moderate distance of the slip.
Ice Eater de-icers prevent ice formation by drawing warmer water up from below the surface and circulating it continuously around the hull and dock structure. That circulation stops ice from building up and eliminates the freeze pressure that cracks hulls, loosens pilings, and damages dock hardware through a hard winter. It is a passive, continuous process that runs without any intervention once the unit is in the water.
This unit requires a 230-volt power supply. It will not operate on a standard 120V shore power outlet. If your dock has 230V service and the outlet is within 150 feet of the deployment point, this configuration covers the installation cleanly. If you need more cord, the 200-foot version of this same 0.5 HP 230V unit is also available.
This is a complete unit. The 150-foot cord is included and no additional components are needed for installation and operation.
Normalized SKU: P500150615
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Ice Eater
Ice Eater .5 HP 115v 150' Cord Complete #P500.150
$1,662.49
$1,928.49
Ice Eater P500.150 Ice Eaters
The Ice Eater P500.150 is a 0.5 HP, 115V de-icing unit built to keep boat slips, marina docks, and waterfront structures clear of ice through the coldest months. It runs on standard 115V single-phase power and comes with a 150-foot cord, giving you plenty of reach from shore power to the water without needing an extension.
The P500 series uses a propeller-driven circulation system rather than a heating element. It pulls warmer water up from below the surface and pushes it outward, disrupting ice formation at the water line. The motor is totally enclosed and thermally protected, so it handles continuous outdoor operation without babysitting.
The unit ships complete and ready to hang. A stainless steel hanging bracket is included, and the motor housing is constructed of UV-stabilized polyethylene that holds up to sun, salt, and freeze-thaw cycles season after season. The propeller guard is also included for safety around dock lines and marine life.
Motor: 0.5 HP, 115V, 60 Hz, single-phase
Cord length: 150 feet
Propeller diameter: 12 inches
Effective de-icing radius: up to 75 feet in diameter depending on water depth and temperature
Motor housing: UV-stabilized polyethylene
Includes: motor, 150-foot power cord, stainless steel hanging bracket, and propeller guard
Rated for continuous duty operation
Thermally protected motor
Designed for docks, marinas, boat lifts, and waterfront pilings where ice pressure can cause serious structural damage. The 150-foot cord makes this a practical choice for larger slips or situations where the power source is set back from the water's edge.
Normalized SKU: P500150
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Ice Eater
Ice Eater .5 HP 230v 100' Cord Complete #P500.100.615
$1,125.00
$1,259.33
Ice Eater P500.100.615 Ice Eaters
The Ice Eater P500.100.615 is a 0.5 HP, 230V de-icing unit designed for docks and marina slips wired for 230V single-phase service. It comes with a 100-foot cord, which covers most standard slip configurations without needing additional wiring runs.
Like the rest of the P500 series, this unit works by circulating water rather than heating it. A 12-inch propeller draws warmer water up from below the thermocline and pushes it outward along the surface, preventing ice from forming at the waterline. No heating element means lower operating costs and no risk of element burnout over a long winter season.
The motor is totally enclosed and thermally protected for continuous outdoor duty. The housing is UV-stabilized polyethylene, built to handle sun exposure, freeze-thaw cycling, and the general abuse that comes with a waterfront environment. A stainless steel hanging bracket and propeller guard are included in the box.
Motor: 0.5 HP, 230V, 60 Hz, single-phase
Cord length: 100 feet
Propeller diameter: 12 inches
Effective de-icing radius: up to 75 feet in diameter depending on water depth and temperature
Motor housing: UV-stabilized polyethylene
Includes: motor, 100-foot power cord, stainless steel hanging bracket, and propeller guard
Rated for continuous duty operation
Thermally protected motor
The 230V configuration makes this the right pick for slips and docks already running 240V pedestals, where running a 115V unit would require a step-down transformer or rewiring. If your marina pedestal has a 30A or 50A 240V outlet available, this unit plugs right in and gets to work.
Normalized SKU: P500100615
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Ice Eater
Ice Eater .5 HP 115v 100' Cord Complete #P500.100
$1,401.24
$1,625.44
Ice Eater P500.100 Ice Eaters
The Ice Eater P500.100 is a 0.5 HP, 115V de-icing unit that runs on standard household current and comes with a 100-foot power cord. It is a solid fit for single slips, boat lifts, and smaller dock sections where a standard 115V shore power outlet is within reach.
The P500 series keeps ice at bay through water circulation, not heat. A 12-inch propeller pulls warmer water up from below the surface and moves it outward along the waterline, breaking the conditions ice needs to form. It runs continuously through the winter without the operating costs or maintenance concerns that come with heating elements.
The motor is totally enclosed and thermally protected, built for unattended continuous-duty operation in outdoor conditions. The housing is UV-stabilized polyethylene that resists sun degradation and handles freeze-thaw cycles without cracking or fading. Everything needed to hang and run the unit is included in the box.
Motor: 0.5 HP, 115V, 60 Hz, single-phase
Cord length: 100 feet
Propeller diameter: 12 inches
Effective de-icing radius: up to 75 feet in diameter depending on water depth and temperature
Motor housing: UV-stabilized polyethylene
Includes: motor, 100-foot power cord, stainless steel hanging bracket, and propeller guard
Rated for continuous duty operation
Thermally protected motor
The 100-foot cord covers most standard slip setups on 115V service. If your power source is further out or you are running 230V pedestals, Ice Eater offers other P500 configurations to match. This one is the straightforward plug-and-hang option for standard shore power.
Normalized SKU: P500100
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Ice Eater
Ice Eater .5 HP 230v 50' Cord Complete #P500.050.615
$1,135.00
$1,270.52
Ice Eater P500.050.615 Ice Eaters
The Ice Eater P500.050.615 is a 0.5 HP, 230V de-icing unit with a 50-foot power cord. The shorter cord length makes it a practical choice for slips and dock sections where the 230V pedestal is close to the water, keeping things tidy without a pile of extra cord to manage through the winter.
The P500 series circulates water to prevent ice formation rather than using a heating element. A 12-inch propeller draws warmer water up from below the surface and pushes it outward along the waterline, disrupting the conditions ice needs to take hold. The result is a clear zone around your dock, pilings, and hull without running up a large electric bill.
The motor is totally enclosed and thermally protected for continuous outdoor operation. The UV-stabilized polyethylene housing holds up to sun, salt air, and repeated freeze-thaw cycles without cracking or fading. A stainless steel hanging bracket and propeller guard are included, so the unit is ready to hang right out of the box.
Motor: 0.5 HP, 230V, 60 Hz, single-phase
Cord length: 50 feet
Propeller diameter: 12 inches
Effective de-icing radius: up to 75 feet in diameter depending on water depth and temperature
Motor housing: UV-stabilized polyethylene
Includes: motor, 50-foot power cord, stainless steel hanging bracket, and propeller guard
Rated for continuous duty operation
Thermally protected motor
The 230V configuration is the right call when your dock pedestal runs 240V service and you want to avoid step-down transformers or adapter setups. The 50-foot cord keeps the install clean when the power source is already close to the slip. If you need more reach, the P500 series is also available with 100-foot and 150-foot cords.
Normalized SKU: P500050615
Frequently Asked Questions
First Choice Marine is an online marine retailer carrying a diverse line of marine parts and accessories and related items from industry-respected and demanded manufacturers and suppliers. Through our diverse distributor network, we are able to access over 150,000 items, including our current site inventory, new products being added, and special order items. If you need it on your boat... we are your one-stop shop!
Yes, we offer FREE Shipping on most orders over $149 to US-48*.
Each product displays a shipping status message, just above the item price. Below is the meaning for each of these codes.
- Qualifies for Free Shipping: This item qualifies for free shipping when the order is $149+
- Qualifies for Free Ground Shipping: This item qualifies for free ground shipping when the order is $149+.
- Oversized - Not Qualified for Free Shipping: This item is too large/heavy to qualify for free shipping
- Hazardous Item - Not Qualified for Free Shipping: This item is hazardous and does not qualify for free shipping
- Truck Freight - Not Qualified for Free Shipping: This item has to be shipped via truck freight. Please contact us for a quote
- In-Store Pickup Only: This item can only be picked up in our Grain Valley, MO retail store
Below the price of the item, on the product page, there is a message indicating the availability of the product.
The quantity on hand is updated as inventory events happen and matches what we have available. If you have urgent needs and we are close to what you need, contact us, and we can confirm stock.
We offer a hassle-free return policy. If you're not completely satisfied with your purchase, you can return it within 30 days for a full refund or exchange.
If you need to return an item, please follow the guidelines here so we can process a prompt refund and assist you in finding the correct item.
Free Shipping
On most orders $149+ to the continental 48 US states.Secure Shopping
Fast, secure checkout with a variety of payment methods.Shop with confidence
25+ years serving the marine industry.Support center
Need help? Contact us via live chat, phone, or email.